MVisionPro Engineering Tools

com.mvisionproPublished by mvisionpro.comOfficial publisherv1.0.0Updated Oct 27, 2026

Read-only machine-vision calculations for optics, interfaces, line scan, sensors, and models.

VerifiedStreamable HTTPWeb executableDeveloper ToolsData & Analytics

Overview

AI-generated overview

Read-only machine-vision calculators for camera optics, interfaces, line scan, sensor lookup and model search, exposed as a remote MCP endpoint.

What you can do
  • Calculate camera geometry, object sampling, exposure and depth of field from a camera, sensor or manual sensor axes
  • Estimate stream bandwidth and compare interface options from a camera or a manual stream set
  • Compute line-scan line width, line rate, exposure and confirmed camera modes
  • Compare a competitor model against bounded Hikrobot candidates
  • Look up sensor aggregation by camera model or sensor part number
  • Search a bounded public catalog by model, alias, SKU or slug
When to use it
Useful when sizing or specifying machine-vision setups: choosing lenses and sensors, checking bandwidth against an interface, planning line-scan configurations, or finding equivalent Hikrobot models and sensor data during component selection.
Requirements
A remote streamable HTTP endpoint at mvisionpro.com; no package, environment variables or headers are declared, and no authentication is declared.
Before you install
The tools are described as read-only calculations and catalog lookups, but results are engineering estimates and should be verified against vendor datasheets. Queries about competitor and Hikrobot models are sent to the provider's remote service.

Installation

In SourceWeft

  1. Open MVisionPro Engineering Tools in the dashboard and add it to a workspace.
  2. Enable the server for the chats that should use its tools.

Web executable via Streamable HTTP. Remote servers run from the web runtime once configured in a workspace.

Use with an agent

Paste this prompt into Claude Code, Codex, Cursor or another agent — or into SourceWeft chat. The agent reads this server's install guide, shows you its publisher, endpoint and sign-in, and adds it to your client once you agree. Keys never go into a command.

Read https://sourceweft.com/mcp/com.mvisionpro%2Ftools/install.md and connect the MCP server it describes to my client. Before changing any config, show me its publisher, endpoint and sign-in method and wait for my OK. Never put an API key in a command or in a file I would commit; ask me where it should come from.

Read the install guide the agent follows

Other MCP clients

Add this to your client's mcpServers config.

{
  "mcpServers": {
    "mvisionpro-engineering-tools": {
      "type": "http",
      "url": "https://mvisionpro.com/tools/mcp"
    }
  }
}

Tools

6

optics

Optics calculation

Calculate camera geometry, object sampling, exposure and depth of field. Provide exactly one sensor source: camera, sensor, or both manual sensor axes. Camera cannot be combined with manual passport fields. fovMm and wdMm are always required.

ParametersnPxlangwdMmrequiredfovMmrequiredblurPxcamerasensorfNumberdefectMmspeedMmSmotionAxisfovHeightMm+6 more

interface

Interface bandwidth

Calculate stream bandwidth and evaluate interface options. Provide either camera or the complete manual stream set widthPx, heightPx, fps, bits, streamType and packed; do not combine the two modes. width and height are independent aliases for widthPx and heightPx, so mixed alias pairs are accepted, but do not send both aliases for one axis. The discovery alternatives describe complete sets; execution also rejects partial manual sets and every camera/manual mixture, for example camera with widthPx.

ParametersfpsbitslangwidthcameraheightpackedcameraswidthPxheightPxinterfacestreamType+1 more

linescan

Line-scan calculation

Calculate line width, line rate, exposure and confirmed camera modes. widthMm is required. Provide exactly one speed field (speedMmS or speedMMin) and exactly one calculation set (defectMm+nPx or accuracyMm+kPx); mode is inferred when omitted. samplingMode defaults to xy, or to width when longitudinalStepMm is present.

ParameterskPxnPxlangmodecamerawidthMmrequireddefectMmspeedMmSdutyCycleinterfacemarginPctspeedMMin+5 more

analog

Camera cross-reference

Compare one unambiguous competitor model with bounded Hikrobot candidates. Compare one unambiguous competitor model with a bounded set of public Hikrobot candidates.

Parametersqrequiredlanglimit

sensors

Sensor lookup

Get a sensor aggregation by exactly one camera model or sensor part. Provide exactly one lookup key: a catalog camera model or a sensor part number.

Parameterslangmodelsensor

models

Model search

Search the bounded public catalog projection. Search the bounded public catalog projection by literal model, alias, SKU or slug.

Parametersqrequiredlanglimit

Version history

1
  1. v1.0.0LatestSep 23, 2026

Score

83% of the applicable checks met

How complete this listing is, computed from the registry entry, the endpoint and public sources. Not a rating of the server and not a statement that it is safe or working today: reachability is a dated check, and no installs or reviews go into the score.

  • Reached in the last 30 daysRequired25 pts
  • Auth declaredRequired10 pts
  • Tools listedRequired15 pts
  • DescriptionRequired15 pts
  • Logo10 pts
  • Documentation15 pts

    Declare a GitHub repository with a README, or serve resource_documentation in the OAuth protected-resource metadata.

  • LicenseNot applicable

    A hosted service is used under its provider's terms, so no license is expected here. This check is left out of the percentage.