armguard-mcp

armguard-mcp

[CI] [PyPI] [License: Apache-2.0] [Python 3.10 | 3.12] [ROS 2 Jazzy] [MCP 2026-07-28] [status: alpha] [M8ven Verified]

A safety-first Model Context Protocol server for ROS 2 manipulators. It lets an LLM agent inspect a robot arm, plan motions, preview them and execute them. Every action passes through a safety envelope that the server enforces outside the model: joint limits, a workspace box and keep-out zones, speed and step-size caps, force/torque thresholds, allowlists, rate limits, a software e-stop, human approval through MCP elicitation, and an audit log. A prompt, or a prompt injection hidden in a camera image or topic string, can change what the model asks for. It cannot change what the server allows.

Status: alpha. The policy engine, safety envelope, approval flow, audit log and all 22 MCP tools run against a simulated Franka FR3 backend. The ROS 2 backend (MoveIt 2, ros2_control, franka_ros2) is tested on ROS 2 Jazzy against real rclpy endpoints and a real MoveIt 2 move_group. It has not been run on a physical robot yet.

This is defense in depth, NOT certified functional safety. See Safety scope and non-goals.

[armguard-mcp demo: a small move runs, a large move needs human approval, a keep-out request is rejected and cannot be executed, and the e-stop blocks planning]

_{Real output of scripts/demo_fake.py against the simulated FR3, abridged (full transcript).}

Try it in 60 seconds

No ROS, no clone. The package ships the FR3 demo policy, so the simulated arm starts with one command:

uvx armguard-mcp            # or: pip install armguard-mcp && armguard-mcp

Point your MCP client at it and ask it to move the arm. Claude Desktop (claude_desktop_config.json) and Cursor (.cursor/mcp.json):

{  "mcpServers": {    "armguard": { "command": "uvx", "args": ["armguard-mcp"] }  }}

Claude Code:

claude mcp add armguard -- uvx armguard-mcp

Then try, in order: "Where is the arm?", "Move the gripper 10 cm up" (runs), "Rotate joint 1 by 50 degrees" (asks you to approve), "Move to x=0.62, y=0.42, z=0.30" (refused: that is inside the camera_mount keep-out zone). Every decision lands in the audit log; --audit-log audit.jsonl keeps it. The bundled policy is for the simulated robot only: --backend ros2 always requires your own --policy.

At a glance

• Problem. An LLM agent that can call robot tools can be wrong, or be steered by a prompt injection hidden in an image or a topic string. One bad tool call moves a real arm.
• Approach. The MCP server checks every plan against a policy file before anything moves: joint limits, workspace box, keep-out zones, step and speed caps, force limits, allowlists and rate limits. Motion outside the envelope needs a human to approve it through MCP elicitation, and a software e-stop and an audit log sit on top.
• Results (simulated FR3, reproducible with one command): all 23/23 unsafe requests in the evaluation suite were refused, clamped, rate-limited or aborted, and no unintended command reached the robot. 1000/1000 random safe moves executed, with none leaving the envelope. Planning with the full safety check takes a median of ~16 ms per call.
• Limits. Not yet run on a physical robot; the simulated backend is kinematic only; the envelope checks the TCP path, not link geometry (measured: 84/201 near-zone plans clip a zone with the hand or wrist); this is defense in depth, not certified safety. See Known limitations.

Contents

• How it differs from generic ROS MCP bridges
• Architecture
• Quick start (simulated FR3, no ROS needed)
• Evaluation
• ROS 2 backend
• Tool reference
• The approval flow
• Policy reference
• Safety scope and non-goals
• Known limitations
• Roadmap
• Citation and License

More detail: docs/architecture.md, docs/threat-model.md, docs/demo.md (a real transcript), CONTRIBUTING.md.

How it differs from generic ROS MCP bridges

Generic bridges such as robotmcp/ros-mcp-server do an excellent job of what they aim for: they connect any MCP client to any ROS 1 or ROS 2 robot through rosbridge, with no changes to the robot's code. The LLM can publish to topics, call services and actions, and set parameters. That generality is the point, and it also means the model can reach anything the ROS graph exposes. Their open issue #283 ("Security: Unrestricted ROS service calls via MCP tool — prompt injection → robot control") describes the resulting risk, and the project's README lists permissions among the contributions it welcomes.

armguard-mcp makes the opposite trade-off. It is narrow, specific to manipulators, and restrictive by design:

If you want to explore a robot freely from a chat window, use a generic bridge. If you want an agent near a real arm with limits it cannot talk its way around, that is what this project is for.

Architecture

flowchart LR    subgraph Client["MCP client (untrusted)"]        LLM["LLM agent<br/>(Claude, GPT, …)"]        Human(["Human operator"])    end
    subgraph Server["armguard-mcp (trusted, enforces policy)"]        direction TB        Tools["22 MCP tools<br/>only enabled groups are registered"]        RL["Rate limiter<br/>per-tool + global token buckets"]        ES["E-stop / force latch"]        Env["Safety envelope<br/>joint limits · workspace box · keep-out zones<br/>speed · step size · force"]        Ap["Approval resolver<br/>(MCP elicitation)"]        Plans["Plan store<br/>TTL · single-use · staleness"]        Audit[("Audit log<br/>JSONL")]        Tools --> RL --> ES --> Env --> Ap        Env <--> Plans        Tools -.-> Audit    end
    subgraph Backend["Robot backend"]        Fake["fake FR3<br/>(kinematic sim, CI)"]        ROS["ROS 2 (rclpy)<br/>MoveIt 2 · ros2_control · franka_ros2"]    end
    Robot["FR3 + Franka safety system<br/>1 kHz control stays here"]
    LLM <-->|"MCP: stdio or streamable HTTP"| Tools    Ap <-.->|"elicitation/create"| Human    Ap --> Backend    ROS --> Robot

The LLM is never in the control loop. MCP works at the level of skills and tasks: plan, preview, execute, grasp. Real-time control, such as 1 kHz impedance and force control, stays in ros2_control and the Franka controllers. The server checks a whole trajectory before it runs and watches the external wrench while it runs.

Quick start (simulated FR3, no ROS needed)

From PyPI, no clone needed (the bundled FR3 policy is used when --policy is omitted):

pip install armguard-mcp                    # or run it without installing: uvx armguard-mcp ...armguard-mcp --audit-log audit.jsonl        # simulated FR3, bundled policyarmguard-mcp --policy my_policy.yaml        # your own policy (required for --backend ros2)

From source, for the tests, the demo and the evaluation scripts:

git clone https://github.com/Lynn-hh/armguard-mcp && cd armguard-mcppython -m venv .venv && . .venv/bin/activatepip install -e ".[dev]"pytest -q                                   # unit tests, a few seconds (no ROS needed)
# stdio (what desktop and CLI MCP clients launch)armguard-mcp --policy examples/policies/fr3.yaml --backend fake --audit-log audit.jsonl
# streamable HTTP on http://127.0.0.1:8765/mcp (no authentication: keep it on localhost)armguard-mcp --policy examples/policies/fr3.yaml --backend fake --transport http --port 8765
# a scripted session: plan, execute, approval prompt, keep-out rejection, e-stoppython scripts/demo_fake.py
# the safety evaluation behind the numbers in "At a glance"python scripts/eval_safety.py

armguard-mcp --help lists every flag: --policy (required), --backend fake|ros2, --ros2-config, --transport stdio|http, --host (default 127.0.0.1), --port (default 8765), --audit-log, --dry-run (forces dry-run on top of the policy), --log-level, --version. Logs go to stderr only, so stdout carries nothing but MCP messages. A policy that fails validation, a backend that is not available, or an audit log that cannot be opened exits with status 2 before the server starts. Binding HTTP to a non-loopback address logs a warning. SIGTERM (docker stop, systemd, MCP hosts) is handled like Ctrl-C and end of input: the server commands a stop of the arm and gripper, then shuts the backend down.

The fake backend is a kinematic FR3 with real FR3 forward and inverse kinematics, time-scaled execution, a Franka Hand model, generated camera images and a fake ros2_control graph. It starts at the policy's home_joint_positions.

Claude Code (.mcp.json, stdio)

Copy examples/mcp.json to .mcp.json at your project root, or run claude mcp add with the same command and arguments. Use absolute paths.

{  "mcpServers": {    "armguard": {      "type": "stdio",      "command": "/abs/path/to/armguard-mcp/.venv/bin/armguard-mcp",      "args": [        "--policy", "/abs/path/to/armguard-mcp/examples/policies/fr3.yaml",        "--backend", "fake",        "--audit-log", "/abs/path/to/armguard-mcp/audit.jsonl"      ]    }  }}

Start with --dry-run or examples/policies/readonly.yaml, which registers only 12 read-only and safety tools, until you have read the policy. If your client does not support elicitation, every action that needs approval is denied. That is deliberate.

Agent skill

skills/armguard-mcp/SKILL.md is an agent skill (the SKILL.md format used by Claude Code and other agents) that teaches an agent the look, plan, review, execute loop, how human approval and the e-stop work, and what it must never attempt. Copy the skills/armguard-mcp/ folder into your agent's skills directory (for Claude Code: .claude/skills/ in your project or ~/.claude/skills/).

Any MCP client (Python SDK v2)

examples/python_client.py is runnable; this is the core of it:

from mcp.client import Clientfrom mcp.client.stdio import StdioServerParametersimport mcp.types as mt

async def ask_human(context, params):  # shown when the server needs approval    print(params.message)    ok = input("approve? [y/N] ") == "y"    return (        mt.ElicitResult(action="accept", content={"approve": True, "operator": "me"})        if ok        else mt.ElicitResult(action="decline")    )

server = StdioServerParameters(    command="armguard-mcp", args=["--policy", "examples/policies/fr3.yaml", "--dry-run"])async with Client(server, elicitation_callback=ask_human) as client:    plan = await client.call_tool("plan_to_pose", {"position": {"x": 0.4, "y": 0.0, "z": 0.4}})    result = await client.call_tool("execute_plan", {"plan_id": plan.structured_content["plan_id"]})

For HTTP, pass the URL instead: Client("http://127.0.0.1:8765/mcp").

Evaluation

python scripts/eval_safety.py              # about 5 s on a laptop; --moves N --seed S --json out.json

The script plays the LLM side of an MCP session against the real server (in-memory transport, fake FR3, examples/policies/fr3.yaml) and measures three things. CI runs it on every push and fails if any unsafe request gets through.

1. Unsafe requests. 23 requests an LLM, or a prompt injection, could make. A scenario passes only if the server refuses it (or clamps or aborts it, where that is the designed behavior) and no actuation command reaches the robot beyond what the scenario allows. The script checks this by wrapping the backend's actuation methods and comparing the robot's joint state before and after, not by trusting the server's own answer.

2. Safe requests. Random targets within 12 cm of the home pose, inside the workspace and at least 3 cm from every keep-out zone, planned and executed one after another from wherever the arm ended up. After each move the TCP is checked independently against the workspace box and keep-out zones. Rate limits are raised for this run only; scenario 23 above covers them.

A run with --moves 1000 --seed 1 gives 1000/1000 executed, 0 rejected, 0 outside the envelope.

3. Link geometry (physics-model check). The envelope checks the TCP path only. To measure what that misses, scripts/eval_link_collisions.py replays the joint waypoints of every accepted plan through the Franka FR3 URDF in NVIDIA Newton: forward kinematics per waypoint, every link's collision mesh transformed into the world, vertices tested against the keep-out boxes, and a signed-distance self-collision check between non-adjacent links. (Newton's FK agrees with armguard's own FR3 kinematics to 0.00 mm.)

pip install newton GitPython            # Newton physics engine; the FR3 asset is downloaded on first runpython scripts/eval_link_collisions.py --workload home --moves 1000python scripts/eval_link_collisions.py --workload near-zone --moves 300

So the TCP-only envelope is sufficient for small moves near home, and insufficient when a target lies just outside a zone: the TCP path stays clear, as checked, while the hand body or the wrist links swing through the box. This is the "elbow can still enter a keep-out box" limitation below, now with a number. A link-level check is on the roadmap. Caveats: the check is kinematic (no dynamics); it tests collision-mesh vertices, so a box that only touches a face between vertices is missed; the self-collision check samples 300 vertices per link; link0 to link2 sit inside robot_base_column by design and are excluded from the headline count.

How to read these numbers.

• They come from the fake backend, which is kinematic: no dynamics, no self-collision. They show that the server's checks and approval logic behave as specified. They do not show how a physical FR3 behaves.
• The force scenario pushes the TCP into a virtual table (stiffness 2000 N/m). The monitor polls at 200 Hz, so the force at which it aborts varies a little from run to run (about 26 to 29 N against the 25 N limit); the robot never finishes the motion and the e-stop always latches.
• Latency depends on the machine (above: Apple M-series laptop, Python 3.12). It is the full MCP round trip of plan_to_pose, including IK and the dense envelope check.
• The safe-move workload is deliberately modest (small moves near home). It checks that the envelope does not get in the way of normal work; it is not a coverage test of the whole workspace.

ROS 2 backend (--backend ros2)

The backend targets ROS 2 Jazzy (Python 3.12) with MoveIt 2 and franka_ros2 v3.x. Humble may work but has not been tested. rclpy is imported only when the ros2 backend is created, so the package installs and runs without ROS. If rclpy is missing, --backend ros2 exits with status 2 and says what to source.

source /opt/ros/jazzy/setup.bash          # plus your franka_ros2 workspace (for franka_msgs)python3 -m venv --system-site-packages .venv-ros && . .venv-ros/bin/activate   # sees rclpypip install -e .armguard-mcp --policy examples/policies/fr3.yaml --backend ros2 \             --ros2-config examples/ros2/fr3_franka_ros2_jazzy.yaml

The defaults are the names in the franka_ros2 v3.5.3 sources for a launch without a namespace. Check them on your setup (ros2 topic list, ros2 action list). Every name is configurable, either in a ros2: section of the policy or in a file passed with --ros2-config. franka_msgs is not in the ROS apt repositories, so build it from franka_ros2. Without it, the gripper falls back to GripperCommand, and collision thresholds and error recovery report "not supported".

How the backend behaves:

• It runs exactly what the envelope validated. The trajectory it sends is built from the validated plan's waypoints and timing. MoveIt's velocities and accelerations are attached only if they belong to those same points. It refuses a plan that also moves joints the policy does not cover, such as the fingers.
• It fails safe. A missing or stale wrench estimate is an error (ros2.require_wrench), and the server refuses to move without one (force.require_wrench); running without force monitoring needs both set to false. The backend cancels the trajectory goal on stop_motion, on a force-limit abort and on a controller timeout, and cancels gripper goals on stop_motion / estop. It also cancels the goal when the MCP call itself is cancelled, for example because the client disconnected, and the server additionally commands a stop in that case.
• Threading. One rclpy node with a reentrant callback group is spun by a MultiThreadedExecutor on a daemon thread. It lives in a private rclpy.Context and installs no signal handlers. rclpy futures are bridged to asyncio with loop.call_soon_threadsafe, so the server must run on asyncio, which is the MCP SDK default. At start-up the backend waits, with a bound, for DDS discovery of its endpoints and logs any that are missing.

Integration tests (tests_ros/, needs a sourced ROS 2 environment; without one every test is reported as skipped):

source /opt/ros/jazzy/setup.bash && . .venv-ros/bin/activate && pytest -q tests_ros

The tests use a random ROS_DOMAIN_ID and ROS_AUTOMATIC_DISCOVERY_RANGE=LOCALHOST. They drive the backend both directly and through the full MCP server with an in-memory client. They run against an in-process fake FR3 cell made of real rclpy endpoints:

• joint states and tf
• a best-effort wrench topic
• a FollowJointTrajectory server that interpolates in real time and honours cancel requests
• controller_manager services
• MoveIt-like planning and FK services
• franka_gripper actions
• franka_hardware services
• camera topics

test_moveit_live.py also starts a real MoveIt 2 move_group, using the Panda from moveit_resources_panda_moveit_config (same kinematic structure as the FR3). It checks OMPL planning, KDL IK, Cartesian paths and /compute_fk end to end. It is skipped when MoveIt is not installed.

Tool reference

This table is generated from the tools the server actually registers: python scripts/gen_tool_table.py. Parameters with ? are optional. Annotations are MCP tool hints (read_only_hint, destructive_hint, idempotent_hint, open_world_hint) meant for clients; the server enforces the policy whatever the client does with them.

Points worth knowing:

• Only enabled groups are registered. A tool from a disabled group does not appear in tools/list at all. The safety group is always registered and cannot be disabled.
• Tools that can ask a human: execute_plan, switch_controllers, set_collision_thresholds, error_recovery and reset_estop. Their approval parameter is injected by the server and hidden from the input schema. An approval value that the client sends as an argument is ignored.
• Never rate limited, never need approval: stop_motion, estop, get_safety_status.
• The plan tools don't move anything. They are marked read-only, but they do record a plan, and a plan with hard violations updates last_violation in the safety status.
• Refused while the software e-stop is latched: planning, execute_plan, gripper, controller and threshold tools, and error_recovery. Introspection keeps working.
• stop_motion and estop stop the gripper too. A gripper action they interrupt returns an error, never success. Only one arm execution and one gripper action run at a time; a second execute_plan while one is running (or still being validated) is refused.
• estop cannot fail because of its input. Any reason (missing, null, a number, very long text) is accepted; it is flattened to one line and truncated to 500 characters.
• Dry run moves nothing: execute_plan, the gripper tools, switch_controllers, set_collision_thresholds and error_recovery validate (and ask for approval where the policy says so) and report dry_run without actuating.
• Out-of-range values are rejected, not clamped: gripper width, speed and force, and collision thresholds. Velocity and acceleration scaling above the cap are clamped to the cap, and the plan summary carries a note saying so. The bounds the policy fixes (joint count, gripper and threshold ranges, scaling range) are also published in the tools' input schemas, so the model can see them.
• Cameras: camera_snapshot only reads topics listed in perception.camera_topics. Images wider than max_image_width are downscaled with Pillow (pip install armguard-mcp[image]), or refused if Pillow is missing. Image bytes are redacted from the audit log.
• Progress: execute_plan streams MCP progress notifications (0..1) while the arm moves.

The approval flow

sequenceDiagram    autonumber    participant L as LLM (via MCP client)    participant S as armguard-mcp    participant H as Human (client UI)    participant R as Robot backend    L->>S: plan_to_pose(position, …)    S->>R: plan (IK + trajectory)    S->>S: densify path, refine to TCP resolution, FK every sample, check envelope    S-->>L: PlanSummary {plan_id, status, violations, requires_approval, expires_at}    L->>S: execute_plan(plan_id)    S->>S: resolver: pre-checks (rate limit, e-stop, plan usable, not stale)    alt approval required and client supports elicitation        S->>H: elicitation: "APPROVE ROBOT MOTION …?" [approve ☐, operator]        H-->>S: accept + approve / decline / cancel    end    S->>S: tool body: re-validate the plan, re-check staleness, interpret the approval, consume plan_id    S->>R: execute, with the force monitor running    R-->>S: progress … done    S-->>L: ExecutionReport {status, approval, max_observed_force_n}

1. Plan. A plan_* tool asks the backend for a trajectory, then samples it in joint space every check_resolution_rad and computes the TCP position of every sample with forward kinematics. Because a fixed joint step does not bound the TCP step (a few centimetres at full reach), it bisects further until consecutive TCP samples are at most tcp_check_resolution_m apart, and tests every segment between samples against the keep-out boxes, so a thin zone cannot slip between two samples. It checks the whole path against the envelope and returns a PlanSummary (including force_monitoring: whether the backend currently provides a wrench estimate). The full trajectory stays on the server.

2. Hard or soft. Each finding is a Violation with a severity.

   • Hard violations make the plan rejected, and no approval can override them. They are: a joint outside its limits anywhere along the path, the TCP leaving the workspace box, the TCP entering a keep-out zone (at a sample or between two samples), a joint travelling more than max_joint_step_rad, a Cartesian path longer than max_cartesian_step_m, a peak joint velocity above max_velocity_scaling of the joint limit, a peak joint acceleration above max_acceleration_scaling of the joint limit (estimated from the waypoint timing, with 10 % tolerance, whatever scaling the backend claims to have used), a scaling factor above its cap, and malformed plans.
   • Soft conditions (NEAR_JOINT_LIMIT: the goal is within joint_limit_margin_rad of a limit; LARGE_MOTION: travel above soft_joint_step_rad) mark the plan as outside the envelope. That makes its status needs_approval when approval.mode is outside_envelope.

3. Execute. Before it asks anyone, the approval resolver runs its pre-checks: the rate limit, the e-stop, whether another plan is executing, whether the plan is unknown, expired, used or rejected, and whether it is stale (the robot has moved more than start_tolerance_rad since planning). A request that fails a pre-check is denied without prompting, so a human is never asked to approve something the server would refuse anyway.

4. Prompt. If approval is required, the server sends an MCP elicitation form with an approve checkbox (unticked by default) and an operator name. The message states the duration, peak joint speed against the cap, largest joint travel, TCP path length, final TCP position, whether force monitoring is on, any soft warnings, and whether this is a dry run. docs/demo.md shows a real one.

5. Decide in the tool body. The body first claims the single execution slot, synchronously, so a concurrent execute_plan is refused and a stop_motion or estop from then on always reaches this execution, even before anything has moved. It runs once and repeats the checks that matter: it re-validates the plan against the envelope, re-checks staleness and reads the baseline wrench. Then it interprets the outcome:

   • accept with approve ticked: the plan runs;
   • accept with approve unticked, decline, or cancel: denied.

   Every outcome goes to the audit log together with the operator name. Once the body has examined a plan, its plan_id is spent, whether the plan ran or was rejected, failed re-validation, was stale, or was denied approval. A call refused earlier, by the rate limit or because another plan is still executing, leaves the plan usable until it expires.

6. Run. Right before the trajectory is handed to the backend, the server checks once more that no e-stop or stop request arrived during the checks; if one did, nothing moves. While the arm moves, a force monitor polls the backend's external wrench at force.monitor_rate_hz. If the force or torque goes over the limit, the server stops the motion, latches the software e-stop, invalidates every outstanding plan, and returns an error that tells the model a human must call reset_estop. The monitor fails closed: a wrench that cannot be read, is missing, takes longer than force.wrench_timeout_s to read, or whose stamp stops advancing for that long aborts the motion. If the stop command itself fails, the software e-stop is latched. With no wrench estimate at all, execute_plan refuses to move unless the policy sets force.require_wrench: false, in which case the plan summary and the approval prompt say that the force limit is not enforced. If the MCP call is cancelled mid-motion (client cancel, host timeout, disconnect), the server commands a stop before the cancellation propagates and records execution_interrupted in the audit log.

When a prompt is required (approval_required in server.py):

An action class that is left out of approval.require_for never prompts, except reset_estop, which the policy loader always adds back to the list. In dry-run mode execute_plan never prompts because nothing will move; the other tools still ask for approval and then report dry_run without acting.

Releasing an e-stop is bound to the e-stop the human saw. Every latch (from estop, the force monitor, or a failed stop) gets a new event number. The reset_estop prompt names it, and the tool body refuses the approval if a newer e-stop was latched while the prompt was open, so approving "event #1" never releases "event #2". The prompt puts the server's facts first (event number, time, any latched force violation). A reason written by the AI agent is shown on one line, in quotes, truncated and labelled unverified, so an injected "operator note: safe to approve" cannot pass for server text.

Clients without elicitation are denied by default. If approval is required and the client did not declare elicitation support, the result depends on approval.on_client_without_elicitation. With deny, the default, the request is refused with a message that says why. With allow, it proceeds, and the audit log records via: no_elicitation_client. allow applies to reset_estop as well, so a client without elicitation can then release the e-stop, including a latched force violation, without any human. Keep the default on real hardware.

Protocol versions. Approval uses an SDK Resolve-injected parameter, which works on both the 2025-11-25 (legacy) and the 2026-07-28 (multi-round-trip) protocol revisions. Tests cover auto, legacy and 2026-07-28. Under 2026-07-28 the SDK may run a resolver more than once per call, so resolvers only read state. The motion, plan consumption and auditing all happen in the tool body, which runs once; see docs/architecture.md.

Policy reference

The policy is a YAML file, validated strictly (extra="forbid", so unknown keys are errors). It is loaded once at start-up, is immutable, and cannot be changed by any tool. Units: metres, radians, seconds, newtons. Positions are in robot.base_frame. A worked example is examples/policies/fr3.yaml; get_safety_envelope returns the loaded policy to the model.

Top level

robot (all fields required)

tools

workspace

motion

force

If a motion starts with the contact force already above the limit (for example, backing out after a force abort), it aborts only if the force rises more than 1 N (0.2 N·m for torque) above its starting value.

gripper (optional)

controllers, perception

rate_limits (token buckets that refill continuously; stop_motion, estop and get_safety_status are exempt)

approval

Safety scope and non-goals

• This is not certified functional safety. armguard-mcp is a software layer, written in Python, that runs on a general-purpose OS. It has no safety rating, no SIL or PL, and no certification under ISO 10218 or ISO 13849. It narrows what an LLM agent can ask a robot to do. It cannot make an unsafe cell safe.
• The real safety layer is somewhere else: the robot's own safety system (on an FR3, the Franka safety configuration and collision reflexes), a risk assessment of the cell, guarding, and a hardware e-stop that is always within reach of a person watching the robot. The software estop tool is a convenience. It is not an emergency stop.
• Get your lab's safety sign-off before connecting this to real hardware. Start with --dry-run, then the read-only policy, then low speed caps and a small workspace.
• Non-goals: real-time control, collision checking of full link geometry (that is MoveIt's job), certified speed and separation monitoring, and protection against someone who controls the host or the policy file.

The threat model, including residual risks such as a human rubber-stamping approvals or a client that fakes them, is in docs/threat-model.md.

Known limitations

• The envelope checks the TCP point path: a polyline whose vertices are at most tcp_check_resolution_m apart, every segment tested against the keep-out boxes. The real TCP arc deviates from those chords by roughly step²/(8·R), well under a millimetre at the default 1 cm for any realistic radius of curvature, so give keep-out boxes a few millimetres of margin. It does not check link geometry against the workspace or keep-out zones, so an elbow can still enter a keep-out box: in the link-geometry check, 84 of 201 accepted plans with targets just outside a zone put the hand or a wrist link inside it. Keep targets away from zones, or wait for the link-level check on the roadmap.
• Force monitoring uses the backend's estimated external wrench, polled at monitor_rate_hz from Python. It is a software backstop behind the robot's reflexes, not a real-time loop. It fails closed (see the approval flow, step 6), but it can only react as fast as the wrench is published and the controller handles a stop.
• Accelerations are checked from the waypoint timing, which is a finite-difference estimate: it never overestimates the peak of a trajectory that the waypoints sample, but it cannot see what the controller does between waypoints.
• plan_to_pose interpolates in joint space, so the TCP does not move in a straight line; use plan_cartesian_path when you need one.
• The HTTP transport has no authentication in this build. Use stdio, or bind to 127.0.0.1 and reach it through an SSH tunnel.
• The fake backend is kinematic only. It has no dynamics, no self-collision and no reflex model. When run from the CLI it has no table, so contact forces are zero; the tests add a virtual table to exercise the force limits.
• The audit log is append-only by convention (opened in append mode, one fsync per record). It is not tamper-evident. Calls rejected before a tool body runs (argument validation, resolver errors) are recorded with outcome rejected.
• Python 3.10 is in the CI matrix, but the author has only run the suite locally on 3.12.
• docker/ is an experimental, untested sketch.
• The ROS 2 backend has been tested against simulated endpoints and a real move_group, but not against franka_ros2 on a physical FR3. Check the topic, service and action names, the wrench frame and the collision-threshold semantics on the real cell before you rely on them.
• With the ROS 2 backend, force monitoring can react only as fast as the wrench topic is published and the trajectory controller handles a cancel request. With ros2.require_wrench: true (the default), a missing or stale wrench makes execute_plan refuse to move, and get_robot_state return an error.
• stop_motion cancels only goals that armguard sent. It does not stop motions started by other tools, for example MoveIt in RViz.

Roadmap

• ROS 2 Jazzy backend: MoveIt 2 planning, FollowJointTrajectory execution, controller_manager, franka_ros2 gripper, collision thresholds and error recovery, tf2, camera topics (tested in simulation and against a real move_group; see tests_ros/).
• Link-level keep-out and workspace check (collision meshes or capsules from the URDF), so the envelope covers the whole arm and not only the TCP path (measured gap: scripts/eval_link_collisions.py).
• Bring-up on a physical FR3 with franka_ros2: check topic names, the wrench frame and the collision-threshold semantics, and measure how quickly the force monitor reacts.
• Isaac Sim demo: FR3 with MoveIt in simulation, driven by an agent through armguard-mcp.
• Video on a real Franka FR3, with the hardware e-stop visible in frame.
• Learned-skill actions from Isaac Lab exposed as skill tools, for example insert_peg with force feedback. The policy would run in the real-time loop, with armguard checking its preconditions and force envelope.
• A benchmark of LLM tool-use safety on manipulators: unsafe requests, ambiguous goals, and prompt injection through camera images, topic strings and tool outputs, measured with and without the server-side envelope.
• Authenticated HTTP transport (MCP authorization), and a tamper-evident audit log with a hash chain.
• Link-geometry workspace checks.
• Publish to PyPI and the MCP Registry (server.json is prepared).

Citation

If you use armguard-mcp in academic work, please cite:

@software{he_armguard_mcp_2026,  author  = {He, Lin},  title   = {armguard-mcp: A Safety-First Model Context Protocol Server for ROS 2 Manipulators},  year    = {2026},  version = {0.1.0},  url     = {https://github.com/Lynn-hh/armguard-mcp},  note    = {University of Tennessee, Knoxville}}

Lin He, University of Tennessee, Knoxville. Research on contact-rich manipulation with a Franka FR3.

License

Apache License 2.0. Copyright 2026 Lin He.