PAPI: Persistent Adaptive Project Intelligence

PAPI

[npm @papi-ai/server] [MCP Registry] [Cycles shipped] [GitHub stars] [License]

End-to-end project management for AI builders.

Your AI starts every session from zero. Your project stays on course.

[A cycle running in PAPI: the hub, the board, the decision log, and the reviews]

AI coding tools are great at writing code and terrible at holding a direction. Scope grows, plans change, and the decisions behind them get made in a chat window and lost there. PAPI keeps the project on course. It gives your assistant structured plan, build, review and release cycles, plus a decision trail recording what was chosen, what was dropped, and why. Your assistant writes and reads it while it works, so it stays current without anyone maintaining it.

You connect it once. From then on, your assistant starts every session knowing which cycle you're on, what's in flight, and what to do next.

If PAPI is useful, star the repo. It's how other people building with AI assistants find it.

Free to start. The whole plan → build → review → release loop, on up to three projects, no card. Free runs a real project start to finish; it isn't a trial. Pricing.

What this repo is. Documentation, install guides, plugin and extension manifests, the PAPI agent skills, and the issue tracker. PAPI's engine is closed source and hosted — you connect to it, you don't build it from here. The @papi-ai/server package on npm is the supported local runtime. The contents of this repo are MIT.

Quick start

Let your AI install it. Paste this to your assistant — Cursor, Claude Code, Windsurf, Codex, VS Code, or any other MCP client:

Read https://getpapi.ai/llms.txt and set up PAPI

Your assistant reads the runbook and walks you through the whole first run: checking it's in the right project folder, connecting, setting up your project, planning your first cycle, and building your first task. It works in coding tools and in chat apps like claude.ai and ChatGPT, and you don't need to be a developer. (The same runbook lives in this repo as llms.txt and llms-install.md if your assistant can't fetch URLs.)

The one thing only you can do. You need a free account at getpapi.ai. After that there are two ways to connect:

• Connection token (default). Open the Connect panel on getpapi.ai, copy the project id and connection token under "This is your project", and hand them to your assistant. It puts them in your tool's config and PAPI works straight away, with no browser step.
• Browser sign-in. Your assistant adds the server and you approve it in the browser. No assistant can click through that screen for you, and until you do the server shows Needs authentication.

Most tools only load a new connection when a conversation starts, so open a fresh conversation after connecting and ask your assistant to run orient.

Prefer to wire it up yourself?

In Claude Code, the shortest path is the plugin — two lines, nothing to copy or edit:

/plugin marketplace add getpapi/papi/plugin install papi@papi

The plugin carries the server config and the PAPI skills for each phase of the cycle: planning, building, reviewing and releasing. It also includes check-mcp, which diagnoses a connection that isn't working, and papi-verify, which health-checks the current cycle.

Every tool also takes the same streamable-HTTP endpoint directly, https://mcp.getpapi.ai/mcp. In Claude Code that's:

claude mcp add --transport http papi https://mcp.getpapi.ai/mcp

Either way, finish with /mcp → papi → Authenticate. Or skip the browser step entirely with the connection token from the Connect panel:

claude mcp add --transport http papi https://mcp.getpapi.ai/mcp --header "Authorization: Bearer YOUR_CONNECTION_TOKEN" --header "x-papi-project-id: YOUR_PROJECT_ID"

The DeepSeek Harness bundle is in this repo but is not yet published to npm, so the command below won't resolve until it is. After creating a PAPI connection token, it will install with:

dsh plugin --profile web add @papi-ai/deepseek-harness

See PAPI for DeepSeek Harness for token handling, verification, compatibility, and removal.

Per-tool config for Cursor, VS Code, Windsurf, Codex, and any generic MCP client is in docs/install.md.

What you get

• plan breaks your goals into a cycle of right-sized tasks, each with a build handoff your assistant can execute directly.
• build tracks what was built, what surprised you, and what was discovered along the way.
• review and release close the loop, so every cycle feeds the next plan.
• strategy reviews every few cycles step back and check direction, not just velocity.
• A dashboard at getpapi.ai shows your cycles, board, and decisions, so you can see the state of the project without asking.

The methodology is the product: a plan, build, review, release loop your assistant runs with you, where each cycle's learnings feed the next plan. PAPI has been built with PAPI for every cycle in the badge above.

[The PAPI hub: what needs your attention, where the current cycle stands, and the next move]

The hub opens on one question — what happens next. The cycle's progress through plan, build, review and release sits under it.

[The PAPI board: tasks grouped by status with priority, size, type and module]

The board is the full picture. Your assistant writes to it as a side effect of working, so it is current without anyone maintaining it.

How PAPI differs from a tracker

Linear, Jira, Asana and Notion are built for people to write tickets and other people to read them. They suit that job well, and plenty of teams keep using them.

PAPI's board is written and read by your assistant as it works. Starting a build opens the task, finishing it files the report, and releasing closes the cycle. You approve the plan and sign off the review.

Taskmaster is a good way to break work into tasks inside a repo. PAPI adds state that lives outside the repo and persists across tools: cycles, build reports, review verdicts, and Active Decisions whose confidence changes as evidence arrives. The same project is available from Claude Code, Cursor, VS Code, Codex and the others, so switching tools doesn't reset it. Moving from Taskmaster? See PAPI vs Taskmaster.

[Active Decisions in PAPI: each decision with its confidence level and the cycles it has survived]

Active Decisions are the part a task tracker has no field for: what was decided, why, what was rejected, and when to revisit it. Confidence moves as evidence arrives.

[Reviews in PAPI: what shipped, where the project stands, and the direction for the next cycles]

Every review leaves a trail, so the reasoning behind the project is still there months later, including for the assistant reading it back.

Tools

PAPI exposes these MCP tools to your assistant. The whole loop is a handful of calls. The server exposes more than these, including claims and sessions for teammates, conventions, document registration and project export. The Tool Reference lists all of them.

Core loop

• orient — one call returns the current cycle, what's in flight, and the recommended next action. Run it at the start of every session.
• setup — scaffold PAPI onto a new project.
• plan — break goals into a cycle of right-sized tasks, each with a build handoff your assistant can execute directly.
• build_list — list the current cycle's tasks and their handoffs.
• build_execute — start a task (creates a branch and handoff) and complete it (records the build report).
• review_list / review_submit — surface finished builds and record accept / request-changes / reject verdicts.
• release / close_cycle — finish the cycle, with a published version (release) or without one (close_cycle).
• tutorial_mode — turn on short explanations and one clear next step in every reply. Handy for your first few cycles.

Board and backlog

• board_view — read the project board and any task.
• board_edit — change a task's status, cycle, priority, or notes.
• ad_hoc — record quick work done outside the cycle so it shows in project history.
• idea — capture a feature, bug, or research note into the backlog.
• bug — file a bug against the board.

Strategy and intelligence

• strategy_review — step back every few cycles to check direction, not just velocity.
• strategy_change — record an Active Decision, with supersede history.
• zoom_out — a periodic retrospective across many cycles.

Docs and projects

• doc_register / doc_search — register and find project reference docs.
• project_list / project_switch / project_create — manage multiple PAPI projects.

Teams

• join — join a project a teammate invited you to.
• contributor_list / contributor_add — see and manage who works on the project.

Documentation

In this repo:

Full documentation on the website — no account needed:

Community and support

Stuck, or something's broken? Open an issue — there are templates for each case, and the connection problem one is the one to reach for if PAPI won't connect or won't authenticate, which is where people get stuck most:

• Connection problem · Bug report · Question · Feature request
• Discord is faster for questions, and release notes land there first.
• CONTRIBUTING.md covers what a useful report looks like and what a docs PR can change.
• Found a vulnerability? Don't open an issue — SECURITY.md has the private channel.

Links

• Website and dashboard: getpapi.ai
• Pricing: getpapi.ai/pricing — free tier, no card
• What shipped in each cycle: getpapi.ai/changelog
• Data, access, and what PAPI doesn't have yet: getpapi.ai/trust
• Licence: the contents of this repo (docs, guides, config examples, Dockerfile) are MIT. That licence covers this repository only — not the PAPI engine, and not the PAPI name or logo, which are trademarks.