Vivado Red MCP

vivado-red-mcp — Vivado MCP server, Red Pitaya edition

An MCP server that lets an AI assistant such as Claude drive AMD/Xilinx Vivado directly: create projects, build block designs, synthesize, implement, simulate, read timing/utilization reports and generate bitstreams — without opening the Vivado GUI.

It has first-class support for the Red Pitaya STEMlab 125-14 (Zynq xc7z010clg400-1): you can go from a natural-language description to a .bit.bin running on the board, using either pure RTL or the official RedPitaya-FPGA PS+PL (ARM + FPGA) backbone, and deploy it over SSH.

Forked from coreyhahn/vivado_mcp and heavily extended (93 tools): block design / IP Integrator, IP catalog, Hardware Manager, advanced reports, Red Pitaya RTL and PS+PL flows, SSH deploy.

Current version: 0.5.0 — see What's new and CHANGELOG.md.

Not to be confused with the unrelated vivado-mcp package on PyPI. This project is vivado-red-mcp: Python module vivado_red_mcp, command vivado-red-mcp.

Contents

• What it can do
• Tested with
• Requirements
• Installation
• First steps
• Red Pitaya
• What's new in 0.5.0
• Troubleshooting
• Available tools
• Architecture
• License

What it can do

• Persistent Vivado session — one Vivado process in Tcl mode is kept alive, so commands don't pay the 20–30 s startup each time.
• Projects and design flow — create/open projects, add HDL and XDC files, synthesis, implementation, bitstream, run strategies.
• Block design (IP Integrator) — ports, IP cores, RTL module cells, nets, PS7 presets, validation, wrapper generation.
• Reports — timing (WNS/TNS/WHS/THS), utilization, clocks, power, DRC, methodology, QoR; returned as parsed values, not just raw text.
• Simulation (xsim) — behavioral and post-synthesis/implementation, read signal values, breakpoints.
• Red Pitaya — one-shot RTL build, full PS+PL build from the official RedPitaya-FPGA repo, bundled board constraints, .bit.bin generation, SSH deploy.
• Raw Tcl — anything not covered by a tool can be run as Tcl (multi-line scripts supported).

Tested with

The RedPitaya-FPGA tutorials in prj/Examples (Led_blink, Knight_rider, Stopwatch, Frequency_counter) build to a bitstream through the server. Led_blink and Knight_rider rebuilt from scratch with MCP tools only produce byte-identical bitstreams to the tutorials' own scripts.

Requirements

1. Python 3.10+
2. AMD Vivado (the free edition is enough for the Red Pitaya xc7z010). When installing, you only need Vivado and, under devices, SoCs → Zynq-7000; Vitis Model Composer and DocNav are not needed.
3. A Vivado license file — also for the free edition on 2025.x/2026.x. Without it Vivado refuses to start (a valid license was not found):
   • open the Vivado License Manager (<Vivado>/bin/vlm.bat on Windows, vlm on Linux);
   • Obtain License → on the AMD site tick Vivado Basic Tier License, Node Locked License (no charge, no expiry) → Generate Node-Locked License;
   • host ID: the MAC address of your network card (shown under View Host Information). The license is tied to the PC, not to the network you use;
   • load the received Xilinx.lic with Load License → Copy License.
4. Vivado reachable by the server, either:
   • on PATH (Linux: source <Vivado>/settings64.sh; Windows: add <Vivado>\bin to PATH), or
   • by telling Claude the full path, which it passes to start_session (e.g. C:\AMDDesignTools\2026.1\Vivado\bin\vivado.bat).

pexpect (Linux/macOS) or pywinpty (Windows) is installed automatically.

Installation

1. Get the code and install it

git clone https://github.com/sinemortal/vivado-red-mcp.gitcd vivado-red-mcppython -m venv .venv# Windows:      .venv\Scripts\activate# Linux/macOS:  source .venv/bin/activatepip install -e .

pip pins the MCP SDK to 1.x by itself. Do not upgrade mcp to 2.x: the server would not start ('Server' object has no attribute 'list_tools').

2. Register it with Claude Code

Once, for all your projects:

claude mcp add --transport stdio --scope user vivado -- vivado-red-mcp

If vivado-red-mcp is not on PATH when Claude Code starts (typical with a virtual environment), point to the venv's Python instead:

# Windowsclaude mcp add --transport stdio --scope user vivado -- "C:\path\to\vivado-red-mcp\.venv\Scripts\python.exe" -m vivado_red_mcp# Linux/macOSclaude mcp add --transport stdio --scope user vivado -- /path/to/vivado-red-mcp/.venv/bin/python -m vivado_red_mcp

Or share it with a single project through a .mcp.json at the project root:

{  "mcpServers": {    "vivado": {      "type": "stdio",      "command": "vivado-red-mcp"    }  }}

Check it with claude mcp list: vivado should show as connected.

3. Optional: disable the RedPitaya-FPGA auto-download

On startup the server downloads the RedPitaya-FPGA repo (source zip) into its working directory if it is missing, for the PS+PL flow. Set the environment variable VIVADO_MCP_NO_AUTOFETCH=1 to turn this off; the rp_fetch_repo tool can still download it on demand.

First steps

Talk to Claude in plain language, for example:

1. "Start a Vivado session" (add the path if Vivado is not on PATH)
2. "Open my project at C:/work/my_proj/my_proj.xpr"
3. "Synthesize and implement it, then tell me if timing is met"
4. "Show me the resource utilization"
5. "Generate the bitstream"
6. "Stop the Vivado session"

Claude picks the tools; you never have to call them by name.

Red Pitaya

Two flows, depending on whether you need the ARM processor:

Example prompt:

Make an LED blinker at 1 Hz for the Red Pitaya using the 125 MHz ADC clock on led_o[0], build it and give me the .bit.bin.

To load the result on the board, ask Claude to use deploy_to_redpitaya (SSH, default credentials root/root; works with OS 1.04 xdevcfg and OS 2.00 fpgautil), or copy it yourself:

scp led_blinker.bit.bin [email protected]:/tmp/ssh [email protected] 'cat /tmp/led_blinker.bit.bin > /dev/xdevcfg'

PS+PL and the RedPitaya-FPGA repo. The current upstream master targets Vivado 2025.1; older checkouts targeted 2020.1. Both layouts are supported. rp_setup_workspace copies the repo into a separate workspace and patches only that copy, so the scripts run on the Vivado you have installed (their exported block-design/IP scripts otherwise refuse any other release) and without a git checkout. Your downloaded repo is never modified. Details: get_vivado_doc redpitaya_ps_pl_flow.

Bundled board data (data/boards/):

• red_pitaya_125_14_full.xdc — full pinout (ADC, DAC, LEDs, expansion connector, XADC), port names as in the official red_pitaya_top (adc_dat_i[ch][bit], dac_dat_o, exp_p_io, …); checked pin by pin against upstream sdc/red_pitaya.xdc.
• red_pitaya_125_14_leds_min.xdc — 125 MHz differential ADC clock + 8 LEDs, for hello-world designs.
• red_pitaya_125_14_info.json — part number and board metadata.

The RedPitaya tutorials (prj/Examples) use different port names (adc_dat_a_i, adc_clk_p_i, …) and a PS7 preset (cfg/red_pitaya.xml); use their own cfg/ files when rebuilding them.

More Italian prompt examples and the step-by-step low-level flow: USAGE.md.

What's new in 0.5.0

Renamed to vivado-red-mcp (package, Python module vivado_red_mcp, command vivado-red-mcp), so it no longer clashes with the unrelated vivado-mcp package on PyPI. If you installed an earlier version, reinstall it and re-register it with Claude Code using the new command (see Installation).

0.4.0

Works on Vivado 2026.1 and with the current RedPitaya-FPGA repo.

Fixed:

• Server failed to start with MCP SDK 2.x → SDK pinned to 1.x.
• Simulation never worked when the server was started by Claude Code on Windows (xsim: Spawn failed) → fixed.
• Multi-line Tcl sent through run_tcl was silently corrupted on Windows → fixed.
• get_timing_summary always returned empty values; get_utilization misread newer reports → both parse current Vivado output.
• Reports right after a build failed with no message (No open design) → the latest completed run is opened automatically.
• get_synthesis_errors_parsed always returned 0 errors → now reads the run logs, including failed IP runs.
• launch_simulation modes rejected by recent Vivado → fixed.
• generate_bitstream timed out after 300 s and didn't check the result → now verified, returns the .bit path.
• Missing license (or any startup failure) now reports Vivado's own message in seconds instead of a generic error after 2 minutes.
• Bundled red_pitaya_125_14_full.xdc had 6 wrong pins (ADC channel A MSB and dac_dat_o[8..12]) → corrected.
• PS+PL flow broken by the new RedPitaya-FPGA layout → both layouts supported.

New tools: create_bd_port, add_module_to_bd, configure_bd_cell, set_run_strategy. Full list in CHANGELOG.md.

Troubleshooting

Available tools

Session management

• start_session - Start a persistent Vivado Tcl session (optional vivado_path)
• stop_session - Stop the Vivado session
• session_status - Session statistics
• check_session_health - Detect a hung/dead session, optionally recover
• get_host_status - Host CPU/memory status

Project management

• create_project - Create a project on disk (default part xc7z010clg400-1)
• open_project / close_project - Open or close an .xpr
• get_project_info - Part, directory, top, …
• add_sources / add_constraints - Attach HDL and XDC files

Design flow

• run_synthesis - Run synthesis (verified run status)
• run_implementation - Run place and route (verified run status)
• generate_bitstream - Generate the bitstream (verified status + .bit path)
• set_run_strategy - Set the synthesis/implementation run strategy

Reports & analysis

Report tools open the latest completed run automatically if no design is open.

• get_timing_summary - WNS, TNS, WHS, THS, pulse width, met / not met
• get_timing_paths - Detailed timing paths for failing/critical paths
• get_utilization - LUTs, FFs, BRAMs, DSPs, IOs
• get_clocks - Clock information
• get_messages - Synthesis/implementation messages

Design queries

• get_design_hierarchy - Module/instance hierarchy
• get_ports - Top-level ports
• get_nets / get_cells - Search nets and cells

Simulation (xsim)

• set_simulation_top - Set the testbench module
• launch_simulation - Behavioral, post-synthesis or post-implementation (functional/timing)
• run_simulation / step_simulation / restart_simulation / close_simulation
• get_simulation_time
• get_signal_value / get_signal_values - Read signals
• get_simulation_objects / get_scopes - Browse the hierarchy
• add_signals_to_wave
• add_breakpoint / remove_breakpoints
• get_simulation_messages

Block design (IP Integrator) — Zynq / AXI

• create_block_design - Create a block design and make it current
• create_bd_port - Scalar, vector or interface ports
• add_ip_to_bd - Add an IP core (VLNV) with CONFIG.* properties
• add_module_to_bd - Add an RTL module as a module-reference cell
• configure_bd_cell - Set CONFIG.* on an existing cell (e.g. PS7 board preset import)
• connect_bd_net / connect_bd_intf_net - Wire pins/ports and AXI interfaces
• auto_connect_axi - apply_bd_automation for AXI master ↔ slave
• apply_ps7_preset - Zynq PS7 automation (FIXED_IO/DDR external)
• validate_block_design - Run BD DRC
• assign_bd_address - Auto-assign AXI address ranges
• regenerate_bd_layout - Tidy the layout
• save_bd_design / close_bd_design - Persist or close the BD
• list_bd_cells - List cells
• generate_bd_wrapper - make_wrapper + add to fileset + set as top

IP catalog

• create_ip / configure_ip - Create and configure catalog IPs
• generate_ip_target / synth_ip - Output products, out-of-context synthesis
• upgrade_ip / report_ip_status - Upgrade and audit IP versions

Hardware Manager (JTAG)

• open_hw_manager / close_hw_manager
• connect_hw_server - Connect to hw_server (default localhost:3121)
• program_device - Program a .bit over JTAG
• refresh_hw_device - Re-read the JTAG chain

Advanced reports

• report_power - Total/dynamic/static power
• report_drc - DRC violations grouped by severity
• report_methodology - UltraFast methodology checks
• report_qor_assessment - QoR score
• report_clock_interaction - Cross-clock paths
• generate_full_report / read_report_section - Full reports to file, read them in pieces

Red Pitaya — RTL flow

• list_boards / get_board_info - Bundled board metadata and XDC paths (no Vivado needed)
• load_board_xdc - Add a bundled board XDC to the project
• create_redpitaya_project_rtl - One-shot RTL build; returns bit_path, bin_path, parsed timing_summary and utilization
• generate_cfgmem - .bit → .bit.bin for /dev/xdevcfg / fpgautil
• get_synthesis_errors_parsed - Structured errors from the run logs, including failed IP runs

Red Pitaya — PS+PL flow

• rp_fetch_repo - Download RedPitaya-FPGA (source zip, no git needed)
• rp_setup_workspace - Isolated, patched copy of the repo to build in
• rp_list_projects - List prj/* projects, flag the Z10-capable ones
• rp_workspace_info - Which projects are already built
• rp_create_custom_project - Clone a base project for your own PL logic
• rp_build_project - Setup → synth → impl → bitstream → .bit.bin, with parsed timing

Red Pitaya — deploy (SSH, no Vivado needed)

• deploy_to_redpitaya - Upload a .bit.bin and load it (xdevcfg on OS 1.04, fpgautil on OS 2.00)
• ssh_redpitaya_exec - Run a shell command on the board

Documentation (offline)

• list_vivado_docs / get_vivado_doc - Bundled topics (block_design, ps7_zynq, timing_constraints, synthesis_strategies, simulation_xsim, red_pitaya_125_14, redpitaya_ps_pl_flow, tcl_quoting, hw_manager, ip_integrator, pitfalls_2020_1), each with links to the AMD user guides

Raw Tcl and misc

• run_tcl - Run any Tcl command or multi-line script
• run_tcl_script - Source a .tcl file
• request_feature / list_feature_requests

Architecture

┌─────────────────┐     MCP (JSON-RPC)     ┌─────────────────┐│   Claude Code   │◄──────over stdio──────►│  vivado-red-mcp     ││   (AI client)   │                        │  server         │└─────────────────┘                        └────────┬────────┘                                                    │ pexpect (Linux)                                                    │ pywinpty/ConPTY (Windows)                                                    ▼                                           ┌─────────────────┐                                           │ Vivado process  │                                           │  (-mode tcl)    │                                           └─────────────────┘

The server keeps one Vivado process in Tcl mode and talks to it through a pseudo-terminal, using the Vivado% prompt to know when a command has finished. Each tool family lives in its own module under tools/; see CLAUDE.md for the design conventions and known Vivado Tcl pitfalls.

Contributing

Issues and pull requests are welcome. There is no automated Vivado test in CI (it only checks that every tool has a handler); changes to the Vivado-facing code should be validated against a real Vivado install.

License

MIT — see LICENSE. Bundled third-party material (Red Pitaya board XDC files, 3-clause BSD) is listed in THIRD-PARTY-NOTICES.md.

Acknowledgments

• Forked from coreyhahn/vivado_mcp (MIT)
• Red Pitaya flows build on RedPitaya/RedPitaya-FPGA
• Developed with Claude (Anthropic)
• Uses the Model Context Protocol
• Integrates with AMD Vivado