Kitchen Timer

com.tnyforge由 tnyforge.com 发布官方发布者v1.0.0更新于 Oct 27, 2026

Plan a meal and run kitchen timers that ring on your phone. No sign-in.

已验证Streamable HTTP可网页运行位置与生活效率与工作流

概览

AI 生成的概览

规划多道菜的一餐,并在做饭者手机上运行会响铃的厨房计时器,可查看、暂停、调整、跳过、加菜和取消。

可以做什么
  • 由你自己拆解菜品来创建用餐计划,返回手机链接、二维码和时间表
  • 查看计划中下一步是什么、还有多久,可选显示手机上的计时器
  • 在手机上暂停或恢复该计划中正在运行的菜品
  • 为某道菜增加或减少分钟数,或跳过该菜当前剩余的等待
  • 向已有计划再加一道菜,或取消计划并移除其手机计时器
适用场景
适合让助手协助协调多道菜的烹饪,使它们同时完成,并让做饭者在厨房用手机收到提醒。也适合在烹饪过程中不碰手机就调整时间。
运行要求
远程端点 kt.tnyforge.com,使用 streamable HTTP;未声明登录、软件包、环境变量或请求头。多数工具需要计划代码(链接的最后一部分),修改计划的工具还需要控制密钥。做饭者须先在手机上打开链接并点击开始,暂停、恢复、跳过和实时计时调整才会生效。
安装前请注意
多个工具会修改或删除状态:adjust_dish、skip_step、add_dish、pause_meal、resume_meal 和 cancel_meal 需要控制密钥,cancel_meal 会使链接失效并移除手机计时器,应先征得本人同意。持有计划代码的人都能查看状态,控制密钥应视为机密。用餐计划和时间表会发送到第三方服务。

安装

在 SourceWeft 中

  1. 打开 控制台中的 Kitchen Timer,将其添加到工作区。
  2. 为需要使用其工具的对话启用该服务。

Web executable,通过 Streamable HTTP。 远程服务在工作区中配置后即可从网页运行时运行。

交给智能体安装

把这段提示词粘贴到 Claude Code、Codex、Cursor 等智能体,或 SourceWeft 对话中。智能体会读取该服务器的安装指南,先向你展示发布者、端点和登录方式,经你同意后再把它添加到你的客户端。密钥不会写进任何命令。

阅读 https://sourceweft.com/mcp/com.tnyforge%2Fkitchen-timer/install.md,并按其中说明把这个 MCP 服务器接入我的客户端。修改任何配置之前,先告诉我它的发布者、端点和登录方式,等我确认。不要把 API 密钥写进命令或我会提交的文件;问我密钥应从哪里获取。

查看智能体所依据的安装指南

其他 MCP 客户端

把它添加到你客户端的 mcpServers 配置中。

{
  "mcpServers": {
    "kitchen-timer": {
      "type": "http",
      "url": "https://kt.tnyforge.com/mcp/open"
    }
  }
}

工具

8

plan_meal

Plan a meal

Make a meal plan: each dish starts at the right moment so everything is ready at the same time. Returns a link (open it on the phone in the kitchen, where the alarms ring), a QR code for that link, and the schedule. YOU do the cooking knowledge: break a recipe into dishes, each with its total cooking minutes, and put the timed moments inside a dish as steps ("simmer 20, rest 5" is a dish of 25 minutes with a step "Rest" at 20). If the person did not say when they want to eat, ASK before calling; use `readyInMinutes` for "we eat in 90 minutes", `readyAt` (an ISO date-time with a UTC offset, or local time plus `timeZone`) for "at 7", or `startNow` to start cooking now (a single timer is a one-dish plan with `startNow`). Keep times realistic and use only what the person gave you; at most 12 dishes and 12 hours. Dish names are plain text, no links. The reply link works for anyone who has it and the plan is deleted about a day after the meal. Tell the person the alarms ring on the phone page, not in this chat. The reply also holds a secret CONTROL KEY (starts with ktpk_): remember it for the rest of the chat, do not show it or put it in any link, and pass it with the plan's code to the control tools to keep managing this plan. Once it works you may offer the person to manage their whole kitchen from now on (⋯ → Link an agent in the app gives the connector address and a 6-digit code).

输入参数dishes必填readyAtstartNowtimeZonereadyInMinutes

meal_status

What is next in a meal plan

Say what is next in a meal plan made with plan_meal, and how long until it. Give the plan's code (the last part of its link). Only reads; never changes a plan. Give the control key too, if you have it, to also see the timers on the phone.

输入参数keycode必填

pause_meal

Pause the meal

Pause every dish of this plan that is running on the phone (the cook can resume on the phone or you can call resume_meal). Needs the plan's code and control key. Only works after the person has tapped Start on the phone; before that it says so.

输入参数key必填code必填

resume_meal

Resume the meal

Resume the paused dishes of this plan on the phone. Needs the plan's code and control key.

输入参数key必填code必填

adjust_dish

Add or take off time

Add time to a dish (a positive number of minutes) or take time off (negative). Before the person taps Start this changes the plan, and the ready time stays; afterwards it changes that dish's timer on the phone. Needs the plan's code and control key.

输入参数key必填code必填dish必填minutes必填

skip_step

Skip ahead on a dish

Skip the rest of the current wait for one dish: a dish still waiting to go in starts now, and a dish that is cooking finishes now. Only works after the person has tapped Start on the phone. Needs the plan's code and control key.

输入参数key必填code必填dish必填

add_dish

Add a dish to the plan

Add one more dish to this plan. The ready time stays, so the new dish goes in at the ready time minus its cooking time and must still fit. Before the person taps Start it joins the plan on the sheet; afterwards it goes onto the phone too. Same rules as plan_meal: a plain-text name, at most 12 dishes. Needs the plan's code and control key.

输入参数key必填code必填name必填stepsminutes必填

cancel_meal

Cancel the meal

Cancel this plan: its link stops working, and if the person already started it, its timers are removed from the phone. Only that plan's timers; nothing else on the phone. Needs the plan's code and control key. Ask the person first.

输入参数key必填code必填

版本历史

1
  1. v1.0.0最新Oct 22, 2026

评分

已满足适用检查项的 72%

该评分衡量此收录条目的完整程度,依据注册中心条目、端点与公开来源计算得出。它不是对服务器本身的评价,也不表示服务器安全或当前可用:可连通性是带日期的检查结果,评分也不包含安装量或用户评价。

  • 近 30 天内可连通必需25 分
  • 已声明认证方式必需10 分
  • 已列出工具必需15 分
  • 描述必需15 分
  • 图标10 分

    请在注册中心条目中发布图标。

  • 文档15 分

    请声明包含 README 的 GitHub 仓库,或在 OAuth 受保护资源元数据中提供 resource_documentation。

  • 许可证不适用

    托管服务按其提供方的条款使用,因此这里不要求许可证。此检查项不计入百分比。