APIFleet

dev.apifleet由 apifleet.dev 发布官方发布者v1.2.0更新于 Oct 29, 2026

Build and run AI phone agents: provider matrix, call-cost estimates, config checks, call management.

已验证Streamable HTTP可网页运行沟通与协作商业与电商AI 与机器学习

概览

AI 生成的概览

APIFleet 让助手搭建和运营 AI 电话代理：查看供应商、估算通话费用、管理助手、工具与号码，并可发起真实通话。

可以做什么
  • 无需密钥即可查看语音与运营商集成、估算通话费用并做静态助手配置检查
  • 创建、读取、更新和删除助手，并为其挂载 HTTP 工具或知识文档
  • 管理工作区的 HTTP 工具、知识文档、Webhook 以及模拟人设与场景
  • 列出并绑定或解绑运营商号码，签发短期浏览器语音测试令牌
  • 读取通话记录、统计、波形与录音，并发起外呼
  • 查看预付余额与充值方式
适用场景
适合让助手在 APIFleet 上搭建和维护 AI 语音代理、在通话前估算成本，或查看通话记录与录音。三个公开工具可用于在注册前评估该平台。
运行要求
远程 streamable HTTP 端点 apifleet.dev。三个 apifleet_ 公开工具无需密钥；其余工具需在工作区 Bearer 密钥，通过 Authorization 请求头发送。付费使用需已充值的工作区：平台费用为每连接 AI 分钟 0.03 美元，另加供应商与运营商费用，最低充值 10 美元，无试用或免费额度。
安装前请注意
Bearer 密钥是完整的工作区凭据。工具会创建、修改并永久删除助手、工具、知识文档、Webhook、人设和录音，绑定号码会改变实时通话路由。外呼与模拟会产生费用，需事先征得用户同意；付费工具要求 confirm:true，结果不明的付费请求不应重试。浏览器测试令牌及工具、Webhook 的签名密钥仅显示一次，不得公开。通话记录可能包含转写文本和录音。

安装

在 SourceWeft 中

  1. 打开 控制台中的 APIFleet，将其添加到工作区。
  2. 为需要使用其工具的对话启用该服务。

Web executable，通过 Streamable HTTP。 远程服务在工作区中配置后即可从网页运行时运行。

交给智能体安装

把这段提示词粘贴到 Claude Code、Codex、Cursor 等智能体，或 SourceWeft 对话中。智能体会读取该服务器的安装指南，先向你展示发布者、端点和登录方式，经你同意后再把它添加到你的客户端。密钥不会写进任何命令。

阅读 https://sourceweft.com/mcp/dev.apifleet%2Fapifleet/install.md，并按其中说明把这个 MCP 服务器接入我的客户端。修改任何配置之前，先告诉我它的发布者、端点和登录方式，等我确认。不要把 API 密钥写进命令或我会提交的文件；问我密钥应从哪里获取。

查看智能体所依据的安装指南

其他 MCP 客户端

把它添加到你客户端的 mcpServers 配置中。

{
  "mcpServers": {
    "apifleet": {
      "type": "http",
      "url": "https://apifleet.dev/mcp"
    }
  }
}

工具

67

apifleet_get_provider_matrix

Public, no key: discover implemented voice and carrier integrations, setup boundaries, platform pricing and documentation. No provider request or call is made.

无需输入参数。

apifleet_estimate_call_cost

Public, no key: calculate USD platform fees plus caller-supplied blended provider/carrier rates. An estimate, not a provider quote or invoice. Does not place a call.

输入参数seconds必填carrier_usd_per_minuteprovider_usd_per_minute

apifleet_check_assistant_config

Public, no key: seven static configuration checks. Send a redacted configuration without secrets or customer data. No save, credential verification, full API validation or call-quality certification occurs.

输入参数config必填

check_entitlements

Read the workspace prepaid balance and funding path. Does not start a checkout or call.

无需输入参数。

list_assistants

List assistants in the authenticated workspace.

无需输入参数。

get_assistant

Get one assistant belonging to this workspace.

输入参数id必填

create_assistant

Create a assistant. Saving configuration does not place a call. The REST response includes revision, configuration and attached resource identifiers.

输入参数data必填

update_assistant

Update selected assistant fields. Omitted fields retain their values.

输入参数id必填data必填if_revision

delete_assistant

Delete this assistant. Review the identifier before deleting; the change cannot be undone.

输入参数id必填if_revision

set_assistant_tools

Replace all attached HTTP tools with existing tools owned by this workspace. Empty tool_ids detaches every tool.

输入参数id必填data必填

set_assistant_knowledge

Replace all attached knowledge documents. Each document must belong to this workspace.

输入参数id必填data必填

create_browser_test_token

Issue a short-lived browser voice-test URL. Opening its WebSocket can incur usage. Never publish the returned token.

输入参数id必填data必填

list_numbers

List number bindings. This does not buy phone numbers from a carrier.

无需输入参数。

bind_number

Bind an existing carrier number to a workspace assistant. This changes incoming call routing; configure the carrier webhook separately.

输入参数data必填number必填

unbind_number

Remove the routing binding. This does not release or cancel the carrier number.

输入参数number必填

list_calls

Read call logs, summary statistics and pagination. Each row may contain transcript, analysis, costs and recording links; recordings require separate authentication.

输入参数pagesortlimitmodelordervoicesearchsourcedate_tooutcomedate_fromsentiment另有 1 个

create_outbound_call

Place a real telephone call. Ask the user to approve recipient, caller number and expected usage first. Billing/provider/carrier checks are the same as REST. No automatic retry or universal idempotency guarantee.

输入参数data必填confirm必填

get_waveform

Read recording waveform metadata and available audio channels.

输入参数id必填

delete_recording

Permanently remove a call recording. The call log remains. Confirm the identifier before deleting.

输入参数id必填

list_tools

List http tools in the authenticated workspace.

无需输入参数。

get_tool

Get one tool belonging to this workspace.

输入参数id必填

create_tool

Create a tool. Creating a tool returns its signing secret once. Configuring a tool does not invoke its URL; attached tools can call it during conversations.

输入参数data必填

update_tool

Update selected tool fields. Omitted fields retain their values.

输入参数id必填data必填

delete_tool

Delete this tool. Review the identifier before deleting; the change cannot be undone.

输入参数id必填

list_knowledge_documents

List knowledge in the authenticated workspace.

无需输入参数。

get_knowledge_document

Get one knowledge document belonging to this workspace.

输入参数id必填

create_knowledge_document

Create a knowledge document. Attach documents separately to use them in an assistant. Total injected knowledge has a 200 KiB limit.

输入参数data必填

update_knowledge_document

Update selected knowledge document fields. Omitted fields retain their values.

输入参数id必填data必填

delete_knowledge_document

Delete this knowledge document. Review the identifier before deleting; the change cannot be undone.

输入参数id必填

list_webhooks

List webhooks in the authenticated workspace.

无需输入参数。

create_webhook

Create a webhook. Creation returns a signing secret once; verify delivery signatures against the raw body. Events may be retried.

输入参数data必填

update_webhook

Update selected webhook fields. Omitted fields retain their values.

输入参数id必填data必填

delete_webhook

Delete this webhook. Review the identifier before deleting; the change cannot be undone.

输入参数id必填

list_simulation_personas

List simulation personas in the authenticated workspace.

无需输入参数。

get_simulation_persona

Get one simulation persona belonging to this workspace.

输入参数id必填

create_simulation_persona

Create a simulation persona.

输入参数data必填

update_simulation_persona

Update selected simulation persona fields. Omitted fields retain their values.

输入参数id必填data必填

delete_simulation_persona

Delete this simulation persona. Review the identifier before deleting; the change cannot be undone.

输入参数id必填

list_simulation_scenarios

List simulation scenarios in the authenticated workspace.

无需输入参数。

get_simulation_scenario

Get one simulation scenario belonging to this workspace.

输入参数id必填

create_simulation_scenario

Create a simulation scenario.

输入参数data必填

update_simulation_scenario

Update selected simulation scenario fields. Omitted fields retain their values.

输入参数id必填data必填

delete_simulation_scenario

Delete this simulation scenario. Review the identifier before deleting; the change cannot be undone.

输入参数id必填

list_simulations

List simulations in the authenticated workspace.

输入参数assistant_id

get_simulation

Get one simulation belonging to this workspace.

输入参数id必填

create_simulation

Create a simulation.

输入参数data必填

update_simulation

Update selected simulation fields. Omitted fields retain their values.

输入参数id必填data必填

delete_simulation

Delete this simulation. Review the identifier before deleting; the change cannot be undone.

输入参数id必填

list_simulation_runs

List simulation runs and pagination; inspect status before starting another run.

输入参数pagelimitstatusbatch_idassistant_idsimulation_id

get_simulation_run

Read a run, its evaluations and linked call when available.

输入参数id必填

delete_simulation_run

Delete a completed simulation result. Running runs may reject deletion.

输入参数id必填

start_simulation_run

Queue an asynchronous test. Models and speech can incur usage. Approve the run first and poll the returned identifier; do not enqueue again while it is running.

输入参数id必填data必填confirm必填

start_simulation_batch

Queue every simulation for one assistant. This can incur multiple test runs; approve the batch first.

输入参数data必填confirm必填

list_tts_rates

Read configured voice-cost reference rates. These are not an invoice or a complete call price.

无需输入参数。

list_tts_voices

Read a provider voice catalog using configured server-side credentials. Catalog failure may return an empty list and error; it is not evidence the provider has no voices.

输入参数provider

list_voice_presets

Read configured runnable voice presets. Provider catalog requests may reach a vendor.

输入参数modelproviderrealtime_provider

get_assistant_voice_presets

Read voices compatible with this assistant configuration.

输入参数id必填

get_tts_settings

Read supported provider voice settings and validation ranges.

输入参数provider

list_provider_credentials

List which provider credentials are configured. Returns metadata only, never provider secret values.

无需输入参数。

list_api_keys

List this workspace API-key metadata. Full key values cannot be retrieved.

无需输入参数。

create_api_key

Create a new full workspace key. The secret is returned once. Store it privately; never put it in public client code.

输入参数data必填

revoke_api_key

Revoke a workspace API key immediately. Revoking the key in use disconnects this MCP client on its next request.

输入参数id必填

get_wallet

Read available, reserved and total prepaid funds, policy, funding availability and runtime enforcement. Amounts ending in microusd are integer millionths of a USD.

无需输入参数。

get_billing_policy

Read the actual workspace policy. Internal exempt workspaces can differ from the public tariff.

无需输入参数。

list_balance_activity

Read balance activity and pagination cursor. Funding is credited only after verified payment processing.

输入参数limitbefore

list_payments

Read confirmed and pending workspace payment records for the configured live/test environment.

无需输入参数。

get_metrics

Read the authenticated workspace metrics snapshot. Metrics may reset with the application process and are not a complete billing ledger.

无需输入参数。

版本历史

1
  1. v1.2.0最新Oct 29, 2026

评分

已满足适用检查项的 83%

该评分衡量此收录条目的完整程度，依据注册中心条目、端点与公开来源计算得出。它不是对服务器本身的评价，也不表示服务器安全或当前可用：可连通性是带日期的检查结果，评分也不包含安装量或用户评价。

  • 近 30 天内可连通必需25 分
  • 已声明认证方式必需10 分
  • 已列出工具必需15 分
  • 描述必需15 分
  • 图标10 分
  • 文档15 分

    请声明包含 README 的 GitHub 仓库，或在 OAuth 受保护资源元数据中提供 resource_documentation。

  • 许可证不适用

    托管服务按其提供方的条款使用，因此这里不要求许可证。此检查项不计入百分比。