brokre

brokre — AI-safe Credential Broker

English | 简体中文

brokre is a local credential broker for AI agents and humans. Use it with Cursor, Claude Code, Kimi Code, Trae, OpenClaw, Hermes Agent, ChatClaw, and other MCP-capable clients to run ssh, mysql, psql, and more — passwords never enter AI context, environment variables, or ps output. It wraps any CLI on your PATH — not only SSH or MySQL — and injects saved passwords at the prompt without exposing plaintext to the AI process, shell history, or process environment.

Developed by Techinone (成都同创合一科技有限公司).

What's New in 0.2.17

0.2.17 is the current release: SessionRelay routed SSH by default, multi-hop bastion routes, local-only list by default, and the existing one-command npm install / auto MCP registration / auto binary upgrade flow.

npm — install, auto-update, auto MCP setup

npm install -g brokre          # or: npx -y brokre@latest

Recommended MCP config (also applied by auto-setup):

{ "command": "npx", "args": ["-y", "brokre@latest"] }

Bastion broker — cluster management

The bastion layer lets AI agents operate many hosts behind one jump box without copying vault passwords into context or scattering secrets on the laptop.

Typical flow for a K8s / DB / batch cluster behind one entry host:

brokre bastion enable b150brokre bastion sync b150 --json          # pull inner alias catalogbrokre bastion unlockbrokre list --include-bastions --json    # b150::db, b150::worker-01, …brokre ssh b150::db systemctl status   # MCP: brokre_exec with routed alias

MCP equivalent:

{ "binary": "ssh", "args": ["b150::db", "uname", "-a"] }

Gate policy (default vs strict) — see Bastion gate policy below. Gate is inactive until brokre bastion set-key; then default unlocks only bastion outbound paths; strict requires unlock for every exec while list remains local-only unless bastion discovery is requested.

See Cross-network list inheritance and Bastion proxy below for setup details.

CLI security (core)

brokre is built around one rule: secrets stay out of the AI's reach and out of observable process state.

Full threat model: SECURITY.md, THREAT_MODEL.md.

Any CLI on PATH (generic by design)

brokre is not a fixed list of database/SSH wrappers. The core model is:

brokre <any-cli-on-PATH> [args...]

First connection: run verbatim, capture the password you type at the prompt, offer to save as an alias.
Next time: brokre <cli> <alias> … auto-injects — AI and scripts only see the alias name.

Preset prompt patterns ship for common tools (ssh, mysql, psql, redis-cli, ftp, clickhouse, git, docker, kubectl, sudo, …). Everything else uses a generic password: / passphrase: matcher — no code changes required.

brokre gsql prod-cluster -c "SELECT 1"    # any proprietary CLI on PATHbrokre kubectl get pods                   # if your cluster CLI prompts for a passwordbrokre my-internal-tool --host db.internal

Customize when needed:

• ~/.brokre/prompts.toml — per-binary prompt regex overrides
• ~/.brokre/manage.toml — custom sections in the manage UI (e.g. GaussDB, internal tools)

Built-in manage UI tabs (when the binary is installed) include SSH, FTP, MySQL, PostgreSQL, Redis, ClickHouse, MinIO — convenience only; the PTY wrapper works for any CLI.

Install (MCP first — recommended for AI)

The npm package brokre launches the local brokre mcp server over stdio for Cursor, Claude Code, Kimi Code, Trae, OpenClaw, Windsurf, VS Code, and other MCP clients.

Choose your install path

Recommended MCP entry (also what auto-setup writes):

{ "command": "npx", "args": ["-y", "brokre@latest"] }

No Node — point MCP at the native binary: { "command": "brokre", "args": ["mcp"] }.

Path A — npm one-liner (0.2.8+)

npm install -g brokre# or without global install:npx -y brokre@latest

Windows: npm install -g brokre, open a new terminal, run brokre --version (first run downloads the native CLI if needed). Local npm i brokre (no -g) is not on PATH.

On npm install, three things happen automatically:

1. MCP launcher — brokre-mcp / npx -y brokre@latest spawns brokre mcp.
2. IDE auto-registration — postinstall runs brokre-setup-mcp: detects installed IDEs only (app, CLI, or real usage artifacts — not empty folders) and merges the MCP entry above into each global config. Idempotent; preserves your other MCP servers.
3. Binary auto-upgrade — on each MCP start, if PATH or ~/.brokre/bin/brokre is older than the npm package, the matching GitHub Release is downloaded.

IDEs covered by auto-setup

Re-run registration (e.g. you installed brokre before Cursor, then installed Cursor later):

brokre mcp setup              # via CLI — same logic as postinstallnpx brokre-setup-mcp          # via npmbrokre mcp setup --dry-run    # preview onlybrokre mcp setup --force      # overwrite existing brokre entry

Skip auto-registration on npm install: BROKRE_MCP_SKIP_SETUP=1. Disable binary auto-download: BROKRE_SKIP_AUTO_INSTALL=1. Pin a binary: BROKRE_BIN=/path/to/brokre.

Requires Node.js 18+ for the npm path.

Path B — Native CLI (install.sh / Homebrew, no npm)

curl -fsSL https://raw.githubusercontent.com/Furowu/brokre/main/install.sh | bash

brew tap Furowu/brokrebrew install brokre

Version and upgrade (built into the CLI — no npm required):

brokre version                # version, binary path, install typebrokre version --check        # compare with latest GitHub releasebrokre version --check --jsonbrokre upgrade                # download latest release (curl + tar)brokre upgrade --check        # exit 1 if an update is availablebrokre upgrade 0.2.10         # install a specific versionbrokre upgrade --force        # reinstall even when up to date

Re-run install.sh also upgrades when a newer release exists.

Register MCP after CLI install (needs Node for the setup script, or npx fallback):

brokre mcp setup

Manual per-IDE setup (optional)

Use this only if you skip auto-setup or need project-scoped config.

Cursor — one-click install, or ~/.cursor/mcp.json:

{  "mcpServers": {    "brokre": { "command": "npx", "args": ["-y", "brokre@latest"] }  }}

Claude Code — user scope in ~/.claude.json or claude mcp add --scope user brokre -- npx -y brokre@latest. Project scope: .mcp.json with "type": "stdio".

More clients and env vars: packages/brokre-mcp/README.md. MCP Registry ID: io.github.Furowu/brokre.

MCP tools and usage

MCP vs CLI (essential for AI agents)

brokre is not a drop-in for ssh / mysql — you must prefix with brokre for vault injection.

Common mistakes (AI agents)

For remote SSH: tokens after the alias are argv slices, not one shell command. Use split tokens for simple commands; use shell_command for complex scripts.

OpenSSH remote quoting: When there are two or more argv tokens after the connection target, brokre adds shell quotes before invoking ssh so OpenSSH’s space-joined remote command does not split scripts (spaces, tabs, quotes). With one remote token, brokre leaves it unchanged — e.g. brokre ssh host 'cd /tmp && ls' is still parsed by the remote login shell. Split argv tokens such as *.log or $VAR are not expanded remotely; put globs/variables in shell_command or a single shell string. Multi-hop bastion routes need an inner brokre with this fix; single-hop direct-inner is covered by local double escaping.

stdin / stdout (automation scripts)

• Intent-aware routing: non-consumer remote commands (test, uname, mkdir, bash -c '…', etc.) auto-disconnect stdin (no -n in heredocs); consumer commands (cat, tee, tar, dd, mysql, psql, bare bash/sh) forward stdin — cat file | brokre ssh … 'cat > path' works with zero extra flags.
• Non-upload remote commands use pipe mode by default (stable stdout); MCP brokre_exec always disconnects stdin.
• Custom tool reading stdin: brokre ssh --with-stdin alias /path/to/tool.
• Explicit disconnect: brokre ssh -n alias cmd, brokre ssh --no-stdin alias cmd.
• Revert to legacy behavior: BROKRE_SSH_LEGACY_STDIN=1 (optionally with BROKRE_SSH_AUTO_NULL_STDIN=1).
• sudo: use brokre ssh alias sudo cmd or MCP brokre_exec_elevated; sudo -n on sudo-rs is non-interactive and brokre cannot inject a password.

MCP elevated sessions (sudo / su, Unix)

By default, brokre mcp reuses a background elevated shell per (alias, mode, user) so sudo passwords are not re-prompted on every call.

brokre_exec_elevated (preferred for privilege escalation):

{  "alias": "prod",  "command": "systemctl status nginx",  "mode": "sudo_login",  "session": "reuse"}

When the session pool is enabled, responses include session_reused and session_idle_expires_at in addition to exit_code / stdout / stderr. session_idle_expires_at is a rolling idle-window hint refreshed on each call, not a fixed expiry timestamp. stderr is usually empty on the pool path. stdout is the remote command output only — TTY echo, __BROKRE_* framing, and shell prompts are stripped.

brokre_exec: binary=ssh with sudo/su in args auto-uses the same pool (always reuse; no session=new|close). Example: args=["prod","sudo","whoami"].

Writing remote scripts/files (shell_command, binary=ssh only): pass only the alias in args; put the full shell script in shell_command (brokre normalizes to sh -c). Brokre quotes multi-token remote argv before OpenSSH so -c scripts with spaces/tabs survive transport; a single remote token is unchanged. Do not embed sh -c '...' in args or split printf/redirects across argv tokens. For privileged system paths use brokre_exec_elevated.command.

{  "binary": "ssh",  "args": ["prod"],  "shell_command": "cat > /tmp/deploy.sh <<'EOF'\n#!/bin/sh\necho ok\nEOF"}

Bastion routes work the same: args=["b150::db"] with shell_command as the remote script.

SessionRelay tunnel (default)

brokre ssh b150::db uses the SessionRelay path by default: the laptop starts brokre tunnel agent --stdio on b150 over SSH, and the agent runs brokre ssh db on the bastion. Multi-hop routes peel one hop per agent (b1::b2::db starts on b1, then b1 continues with b2::db). Inner credentials stay in the bastion vault; the laptop only relays terminal bytes. BROKRE_TUNNEL=0 is a temporary legacy escape hatch for emergency rollback.

brokre tunnel doctor b150brokre ssh b150::db uname -a

MCP brokre_exec responses for routed SSH include tunnel: { mode, active }. TcpForward, endpoint sync, Manage UI tunnel controls, and persistent tunneld are later phases.

Not supported: interactive sudo -i without a command, vim/top, or sudo passwords different from the vault password field. See THREAT_MODEL.md T12.

On first connect with an empty vault, brokre opens manage in your browser (http://127.0.0.1:56777/?t=…). Session tokens stay on localhost — never returned to the AI. Set BROKRE_MCP_NO_AUTO_OPEN=1 to disable auto-open.

| MCP tool | Purpose |

Add credentials

After CLI install, the manager opens on first run (brokre manage --onboard --open). Or anytime:

brokre manage --open

Or save on first interactive connection (any CLI):

brokre ssh [email protected]brokre my-tool --host internal.corp

Use (AI-safe)

brokre mysql prod-db -e "SHOW TABLES"brokre ssh prod-bastion uname -abrokre <your-cli> <alias> [args...]

List metadata (safe for AI / scripts)

brokre list --json              # local aliases with reachability status (default probe)brokre list --no-probe --json   # metadata only, skip TCP/SSH probesbrokre list --reachable-only    # hide unavailable aliasesbrokre list --all --json        # compat: show all (same as default unless --reachable-only)brokre list --no-bastion-discovery   # local only — no bastion SSH discovery

When bastions are registered, brokre list stays local-only by default and does not SSH to bastions or trigger bastion unlock. Use brokre list --include-bastions (MCP: include_bastions=true) when you actually need routed aliases such as b150::db; that remote discovery may require unlock.

OpenSSH sessions inject ConnectTimeout=5 by default (BROKRE_SSH_CONNECT_TIMEOUT). Override with -o ConnectTimeout=N or the env var. Bastion RPC (brokre list --include-bastions / remote list) times out after 60s (BROKRE_BASTION_RPC_TIMEOUT). Remote commands use ControlPath=none so they do not attach to a ControlPersist mux master.

Cross-network list inheritance (bastion broker)

For cross-network access — travel, VPN, public entry points — when direct LAN aliases are unreachable locally but reachable via a bastion running brokre.

Prerequisites

1. Laptop: brokre bastion enable b150 (b150 is a saved SSH alias)
2. Bastion host runs brokre at ~/.brokre/bin/brokre (standard install / npx path) with inner aliases saved (e.g. db)

Routed list

brokre bastion unlock            # if bastion key is setbrokre list --include-bastions   # includes b150::db (route=b150, access=via_b150)

When cross-network, use --include-bastions when you need routed aliases. Plain brokre list stays local-only and does not unlock or SSH to bastions.

Execute

brokre ssh b150::db uname -a# MCP: brokre_exec binary=ssh, args=["b150::db", "uname", "-a"]

When both paths work, the list shows both db (direct) and b150::db (via_b150) — distinguish by access.

Bastion proxy (cross-network / intranet entry)

Promote any saved SSH alias whose remote host runs brokre into a bastion broker. Secrets stay on the bastion; the laptop caches metadata and executes via SSH passthrough.

brokre bastion enable b150        # register ssh alias b150 as bastionbrokre bastion set-key              # set bastion unlock key (TTY)brokre bastion unlock               # unlock outbound session (TTL, 30 min idle default)brokre list --include-bastions --json # discover bastion-routed aliasesbrokre ssh b150::db uname -a        # routed exec via b150 remote brokrebrokre bastion sync b150 --json     # fetch alias list from one bastion

• Route separator :: (: is illegal in alias names): db (local), b150::db (via bastion), b1::b2::inner (multi-hop, default depth ≤2).
• Remote brokre: routed exec invokes ~/.brokre/bin/brokre on the bastion (with BROKRE_SOFT_MEMLOCK=1, BROKRE_ALLOW_FILE_KEYCHAIN=1, BROKRE_ROUTED_INNER=1 for headless Linux). Interactive commands (e.g. sudo -i) automatically get -tt.
• Guardrails: probe concurrency cap, ms timeouts, short cache, loop detection, audit route/bastion (HMAC v4).
• Manage UI: brokre manage Bastion tab — register/disable bastions, Web set-key and unlock/lock, strict-mode toggle, sync remote aliases; non-TTY still auto-opens /bastion-auth. Audit tab filters by bastion/source and shows route fields.

Bastion gate policy (default vs strict)

The bastion gate is a human unlock step before sensitive operations. It is off until you set a bastion key (brokre bastion set-key). After a key exists, unlock establishes a local TTL session (brokre bastion unlock, TTY passphrase, manage UI /bastion-auth, or MCP browser elicitation).

Policy is stored at ~/.brokre/bastion/policy.json (strict_mode, default false).

Examples (default mode, key set, session locked)

In strict mode, exec rows require unlock; metadata-only brokre list remains local-only and does not unlock unless --include-bastions is used.

Set gate mode

brokre bastion strict status    # default | strictbrokre bastion strict on        # strict — all exec gated; list stays local-only unless discovery is requestedbrokre bastion strict off       # default — bastion outbound only

MCP read response includes strict_mode, gate_mode, key_set, unlocked. List/exec responses include bastion_gate (required, unlocked_during_call, idle_expires_at).

Unlock session TTL (defaults): 30 min idle (BROKRE_BASTION_IDLE_SECS), 8 h max lifetime (BROKRE_BASTION_MAX_SECS). Idle window renews on each gated call while unlocked (shared across CLI, MCP, and manage UI via ~/.brokre/run/bastion_session.json). Bastion gate auth is independent of manage UI session idle expiry. Disable auto-open browser on MCP unlock: BROKRE_BASTION_NO_AUTO_OPEN=1.

Reveal / delete (human-only, real TTY)

brokre reveal mysql prod-db --field passwordbrokre rm ssh prod-bastion

Audit log (metadata only)

brokre audit list --profile ssh --action exec --jsonbrokre audit verify --json

Events are stored at ~/.brokre/audit/audit.log (HMAC-chained). Command arguments are uniformly redacted as <REDACTED>. New events include a source field (cli, mcp, or manage). The manage UI Audit log tab and MCP brokre_audit_list expose the same metadata.

Manage UI security

• 127.0.0.1 only; session token in terminal
• Passwords: create / rotate only — no read API
• Delete / rotate require reveal passphrase (or YES for auto-saved records)
• 15-minute idle timeout

Architecture

┌─────────┐     ┌──────────┐     ┌─────────────┐     ┌────────────┐│ AI/User │────▶│ brokre CLI│────▶│ OS Keychain │────▶│ Vault File │└─────────┘     └──────────┘     └─────────────┘     └────────────┘                      │                      ▼               ┌─────────────┐               │  PTY + inj. │──▶ any CLI on PATH (ssh, mysql, gsql, …)               └─────────────┘

• Double encryption: unique DEK per field; wrapped for exec and reveal separately.
• Vault metadata: profile, name, host_alias, saved_args in cleartext beside ciphertext (THREAT_MODEL.md T3).
• SSH private keys: 0600 temp file + -i for the session (docs/HARDENING.md).

Preset manage UI groups

Convenience tabs when the binary is on PATH:

Roadmap

Today: generic PTY wrapper + manage.toml groups + prompts.toml overrides.

Planned: full TOML connector profiles under ~/.brokre/profiles/ with per-tool injection strategies.

Piped stdin and OpenSSH sharing

• Piped stdin (tar | brokre ssh host 'tar xf -'): pipe data forwards only after injection completes.
• OpenSSH family (ssh, scp, sftp): shared saved credentials when the host matches. Interactive save required first (TTY).

Development

cargo test    # unit tests in src/ only (no tests/ integration suite in this repo)cargo clippy --all-targets --all-features -- -D warningscargo build --release   # binary: target/release/brokre

Release version is declared in VERSION (also reflected in Cargo.toml and packages/brokre-mcp/package.json). Official binaries and npm packages are published by TechinOne via GitHub Releases and CI — not part of this open-source tree.

License

MIT — see LICENSE.

Techinone · 成都同创合一科技有限公司