Fredenslund workshop tools

io.github.afredenslund由 GitHub 账号 afredenslund 发布v1.0.10更新于 Oct 24, 2026

MFT/3 hole patterns (Shaper-ready SVG) and French cleat wall plans with cut lists. Free, unofficial.

已验证Streamable HTTP可网页运行

概览

AI 生成的概览

一个免费、非官方的远程 MCP 服务器,用于生成 Festool MFT/3 狗孔图案和带切割清单的法式挂条墙方案。

可以做什么
为任意尺寸的台面生成 MFT/3 狗孔图案,将请求的宽度和深度对齐到最接近的有效 MFT/3 尺寸,并输出适合 Shaper 的 SVG,含 96 mm 网格上的 Ø20 mm 孔和四角螺丝孔。按 Fredenslund 挂条系统规划法式挂条墙,包括挂条板、间隙、挂钩板、缓冲区和悬挂工作台,并附切割清单。
适用场景
适合制作或规划工坊家具时使用:布置 MFT/3 风格的工作台面,或设计法式挂条墙并需要精确尺寸和切割清单。
运行要求
通过 streamable HTTP 连接 fredenslund.dk 的远程端点;未声明任何软件包、环境变量或请求头。
安装前请注意
该服务器被描述为免费且非官方,切割材料前请自行核对尺寸和切割清单。未声明身份验证。

安装

在 SourceWeft 中

  1. 打开 控制台中的 Fredenslund workshop tools,将其添加到工作区。
  2. 为需要使用其工具的对话启用该服务。

Web executable,通过 Streamable HTTP。 远程服务在工作区中配置后即可从网页运行时运行。

交给智能体安装

把这段提示词粘贴到 Claude Code、Codex、Cursor 等智能体,或 SourceWeft 对话中。智能体会读取该服务器的安装指南,先向你展示发布者、端点和登录方式,经你同意后再把它添加到你的客户端。密钥不会写进任何命令。

阅读 https://sourceweft.com/mcp/io.github.afredenslund%2Ffredenslund-workshop-tools/install.md,并按其中说明把这个 MCP 服务器接入我的客户端。修改任何配置之前,先告诉我它的发布者、端点和登录方式,等我确认。不要把 API 密钥写进命令或我会提交的文件;问我密钥应从哪里获取。

查看智能体所依据的安装指南

其他 MCP 客户端

把它添加到你客户端的 mcpServers 配置中。

{
  "mcpServers": {
    "fredenslund-workshop-tools": {
      "type": "http",
      "url": "https://fredenslund.dk/mcp"
    }
  }
}

工具

2

mft3_hole_pattern

MFT/3 hole pattern

Festool MFT/3 dog-hole pattern for a table top of any size. The requested width and depth snap to the nearest valid MFT/3 size (46 + 96 × n mm, n = 1–20, i.e. 142–1966 mm): Ø20 mm holes on a 96 mm grid with the first hole centred 71 mm from every edge, plus the four corner screw holes (Ø11 through, Ø15 counterbore). Returns the snapped size, hole count, every hole and screw-hole position, the Shaper export depths, the file name, a link to the true-to-scale SVG for Shaper Origin/Studio, a picture of the top (a link to a 1200 × 630 PNG) and a link that opens the size in the tool. When you present the result, link the SVG file (it is what the person cuts from), the picture and the tool. The original MFT/3 top is 1102 × 718 mm (11 × 7 holes). Unofficial hobby tool, not affiliated with Festool or Shaper.

输入参数depth_mm必填width_mm必填include_svgthickness_mmcounterbore_mm

french_cleat_plan

French cleat wall plan

Plan a French cleat wall for a workshop with the Fredenslund cleat system: 90 mm cleat boards and 90 mm gaps (180 mm pitch), hook plate 72 mm including 12 mm material, 30 mm buffer between hangers, a 900 mm table that hangs on its own cleat one hook lower (cleat top 840) with the rows following that cleat, top cleat at least one gap below the ceiling, lowest cleat at least 210 mm above the floor (its underside; rows 300 … 2280 on the default wall). A hanger comes off by lifting it the material + 3 mm, so the hook plate is at most the gap − 3 and the top cleat at least the hook plate + 3 below the ceiling. The default wall is a full plywood sheet, 1220 × 2440 mm. Give the wall size and the hangers to hang (hooks, shelves, boxes, panels: left edge, the cleat row it hangs on, width, extra rows spanned below — a shelf usually spans one row). Returns the cleat rows (cleat top heights from the floor), every hanger with its panel height and whether it fits — and why not (row missing, row off, outside wall, collision) — the cut list with cleat metres, wall coverage, a picture of the wall (a link to a 1200 × 630 PNG) and a link that opens the same plan editable in the tool. All values in mm. Call with no hangers to get the rows for a wall first. Beta.

输入参数systemhangersrows_offwall_width_mmwall_height_mm

版本历史

9
  1. v1.0.10最新Sep 27, 2026
  2. v1.0.8Sep 27, 2026
  3. v1.0.7Sep 26, 2026
  4. v1.0.6Sep 25, 2026
  5. v1.0.5Sep 25, 2026
  6. v1.0.4Sep 25, 2026
  7. v1.0.3Sep 24, 2026
  8. v1.0.2Sep 24, 2026
  9. v1.0.0Sep 16, 2026

评分

已满足适用检查项的 56%

该评分衡量此收录条目的完整程度,依据注册中心条目、端点与公开来源计算得出。它不是对服务器本身的评价,也不表示服务器安全或当前可用:可连通性是带日期的检查结果,评分也不包含安装量或用户评价。

  • 近 30 天内可连通必需25 分

    请保持端点能够响应 MCP 握手;SourceWeft 每 30 天探测一次。

  • 已声明认证方式必需10 分
  • 已列出工具必需15 分
  • 描述必需15 分
  • 图标10 分
  • 文档15 分

    请声明包含 README 的 GitHub 仓库,或在 OAuth 受保护资源元数据中提供 resource_documentation。

  • 许可证不适用

    托管服务按其提供方的条款使用,因此这里不要求许可证。此检查项不计入百分比。