Kia Access MCP
[CI]
[npm]
[license]
A Model Context Protocol server that connects Claude to your own Kia vehicle through the Kia Owners API the Kia Access mobile app uses: vehicle status, location, odometer, EV charge state, and confirmation-gated door, climate, and charging commands.
[!WARNING]
AI-developed project. This codebase was built and is maintained by Claude Code. No human has audited the implementation. Review the code and the tool permissions before pointing it at a real car.
[!CAUTION]
This server can move a two-tonne object and can unlock your car. Every command tool asks you to confirm before it acts — with a confirmation prompt where the client supports one, otherwise a preview plus a one-time token that only a repeat call can use (see Confirmations) — and door lock/unlock is not even registered unless you opt in with KIA_WRITE_MODE=all. Read Vehicle commands before changing that.
What you can do
Ask Claude things like:
- "Is the EV9 locked, and what's the charge at?"
- "Warm the car up to 72 for ten minutes"
- "Where did I leave the car?"
- "Refresh the car's status, then tell me the odometer"
Requirements
- Node.js 22.5 or later
- A Kia Owners / Kia Access account with an enrolled vehicle, and its password
- A phone or mailbox you can read once, for the one-time MFA passcode
Acknowledgement of terms
By using this server you accept that:
- It uses your own Kia account credentials to talk to the same private API the Kia Access app uses. It cannot reach anyone else's vehicle or account.
- Kia's terms govern your use of it, exactly as they govern your use of the app. This is not an official or supported integration and is not affiliated with, endorsed by, or sponsored by Kia.
- Commands act on a real vehicle in the physical world. Unlocking leaves the car unsecured until someone locks it; climate preconditioning runs the HVAC and draws power. You are responsible for every command you confirm.
- Failed logins have a permanent cost. Kia counts them (
loginAttempt) and eventually sets enforceRecaptcha, after which server-side login for that account is impossible. This server therefore never retries a rejected credential — see If login fails.
Installation
1. Clone and build
2. Configure credentials
.env is gitignored. The server never logs credentials, and no tool ever returns your password.
3. Register with Claude Code
Missing credentials do not stop the server from booting — it starts, answers tools/list, and only reports the configuration error when a tool actually needs to call Kia. Run kia_session_status to see what it thinks it has.
The one-time MFA bootstrap
Kia challenges every new device with a one-time passcode. This server bootstraps once, stores the resulting remember-me token (rmtoken) under ~/.kiaaccess-mcp/session.json, and from then on mints fresh sessions silently — Kia does not rotate the token and does not challenge again.
Run it through Claude, in this order:
kia_session_status — confirms credentials are present. If it reports hasSession: false, continue.kia_start_login (asks you to confirm first) — sends your credentials, returns an otpKey and an xid, plus the masked phone/email Kia has on file.kia_send_otp — pick SMS or EMAIL. The passcode expires in about two minutes.kia_verify_otp — hand it the passcode. The token is stored locally and is deliberately not returned.kia_list_vehicles — confirms the session works and gives you the vehicleKey every other tool takes (as its vehicle_key argument).
To start over (revoked token, changed password, handing the machine on), run kia_forget_session (asks you to confirm first) and repeat from step 2.
Running it somewhere with no phone to read
The bootstrap needs a human once. A deployment that has no one to read an OTP — a remote host — cannot run it at all, so bootstrap on a machine that can and move the token:
- Set
KIA_DEVICE_ID to a fixed uuid before the bootstrap, on both machines. The rmtoken is minted against a device uuid and is worthless with a different one, and kia_session_status only ever reports a truncated prefix — so if you let it be generated, you cannot read back the value you need.
- Bootstrap as above, then copy the
rmtoken value out of ~/.kiaaccess-mcp/session.json yourself, in a terminal. No tool returns it: the token is a long-lived MFA bypass, so it is never put into a conversation.
- Give the remote deployment that value as
KIA_RMTOKEN, alongside KIA_USERNAME, KIA_PASSWORD and the same KIA_DEVICE_ID.
KIA_RMTOKEN takes precedence over anything in the local session store, so the deployment's session is whatever you handed it rather than whatever it last wrote. Treat the value like the password it stands in for: it bypasses MFA, and with the account password it grants full control of the vehicle.
If login fails
Do not retry. Kia increments loginAttempt on every rejection and eventually sets enforceRecaptcha, which breaks server-side login for that account permanently. Verify the email and password in the Kia Access app first, fix .env, restart, and only then try again.
Vehicle commands
KIA_WRITE_MODE decides which command tools are registered at all. This is a structural gate, not a runtime check: a tool that was never registered cannot be invoked by any host permission setting or by an instruction injected into the conversation.
An unrecognised value fails closed to none and warns on stderr — a typo must never silently grant the ability to unlock a car.
Two more rules hold for every command:
- Confirmation-gated. Nothing is sent until you confirm. The confirmation shows the exact request that would be sent; until then there is no network call at all. See Confirmations.
- Accepted is not confirmed. Kia answering "success" only means the request was accepted. The only proof a command took effect is re-reading the vehicle and diffing the field, so results report
commandAccepted and stateConfirmed separately. Observed changes took 30–60 seconds.
Confirmations
Every write tool (the commands above, plus kia_start_login and kia_forget_session) asks you to confirm before it acts. A client that can show a confirmation prompt (Claude Code) shows one, with the exact request. A client that cannot (claude.ai, Claude Desktop) gets a two-step flow instead: the first call does nothing and returns a preview plus a confirmToken, and only a repeat call carrying that token proceeds. The token is bound to the exact request previewed — change an argument and it is refused (DRAFT_CHANGED) with a fresh preview; use it twice and the second call is refused (TOKEN_REUSED).
Tools
Account and session
Reads
Commands
Every endpoint here was verified live against a 2024 EV9 — the reads and the four door/climate commands on 2026-07-27, and the three evc/* charging commands on 2026-07-28 against a plugged-in car. Each was proven by re-reading state, never by the success status: Kia answers statusCode: 0 the moment it accepts a command, seconds before the car acts, and on an unplugged car it answers success and does nothing at all. Every command result therefore reports "accepted" and "confirmed" separately. The full protocol write-up is in docs/KIA-API.md.
Development
License
MIT
