Apple Mail Actions

io.github.redpop由 GitHub 账号 redpop 发布v0.4.0更新于 Nov 15, 2026

Move messages between mailboxes in Apple Mail on macOS. Needs the Apple Mail read server.

发布方自己的服务:actions.world

已验证STDIO仅桌面文件与存储沟通与协作

概览

AI 生成的概览

仅限 macOS 的配套服务器,让助手在 Apple Mail 中把邮件移动到其他邮箱,并可选地把单个附件保存到本地文件夹。

可以做什么
  • 在同一账户的邮箱之间移动邮件,每次调用逐条处理并返回每封邮件的状态
  • 在开启保存功能时,把某封邮件的一个附件存入交接文件夹并返回文件路径
  • 跳过疑似安全邮件、五分钟内已移动过或无法用 Message-ID 识别的邮件
  • 提供 doctor 命令,检查辅助应用、自动化权限、Mail 运行状态和受支持的账户
适用场景
适合让助手整理邮箱:先用配套的只读服务器读取邮件、建议目标文件夹,再真正移动已确认的邮件。只有在同时安装该只读服务器、且 Mail 正在运行的 Mac 上才值得添加。
运行要求
移动邮件需 macOS 26 或更高版本(macOS 15 可启动但所有移动都会被拒绝);Node.js 22.16 以上或 24 以上;同版本的只读服务器并授予完全磁盘访问权限;Mail 正在运行;通过 setup 命令授予自动化权限。必须设置 APPLE_MAIL_ACCOUNTS,APPLE_MAIL_EXCLUDE_MAILBOXES 应与只读服务器一致。
安装前请注意
它会改变邮件状态:移动由 Mail 执行并同步到邮件服务器,且失败不会重试。不要选择“始终允许”,应使用会询问的模式,否则恶意邮件可能让模型在无人察觉时移动邮件。仅测试过 mailbox.org;其他 IMAP 提供商未经测试,Gmail、Exchange 和本地文件夹会被拒绝。保存的附件是来自第三方的不可信文件,会一直留在磁盘上直到你删除。

安装

在 SourceWeft 中

  1. 打开 控制台中的 Apple Mail Actions,将其添加到工作区。
  2. 为需要使用其工具的对话启用该服务。

Desktop only,通过 STDIO。 STDIO 服务会启动本地进程,因此需要 SourceWeft 桌面宿主。

其他 MCP 客户端

参照 仓库 中的启动说明。

README

apple-mail-actions-mcp

An MCP server with one tool, move_messages, and one optional tool, save_attachment. It moves messages to another mailbox of the same account in Apple Mail and, when you switch it on, saves one attachment of a message to a folder. It is the companion of @redpop/apple-mail-mcp, the read-only server. That package stays read-only; all moving code lives here.

Background and design decisions for both servers: the article on martin-alker.de.

macOS only. First released as 0.3.2 on 2026-11-12, on npm, as a GitHub release with the .mcpb, and in the MCP Registry. The plugin follows npm seven days after a release, so it starts with 0.3.2 once its pin reaches that version (about 2026-11-19).

What it does

Claude looks at your mailbox with the read server, proposes a folder for some messages, and you confirm. Then Claude calls move_messages with message ids and target mailbox ids. The package moves messages and, when enabled, saves attachments. It does not send, draft, delete, flag, create folders, read mail or move between accounts.

"Which of these invoices belong in the Accounting folder? Move the ones you are sure about."

The server asks Claude to show the proposal first, with the choices move all, move some, adjust first or move none. That is a request in the server instructions, not a lock. The lock is that the tool is not marked read-only, so your client asks before each call, but only in a mode that asks.

Do not choose "Always allow" for this tool. It turns that confirmation off, and a malicious mail could then make the model move messages without you seeing it.

Use a mode that asks. In Claude Desktop and Cowork, the Auto mode does not ask: an automated check blocks only actions it flags as risky, otherwise Claude moves without asking, even though the tool is set to "Needs approval". Choose Manual for conversations that may move mail. In a test on 2026-11-11, Auto moved a message right after a "yes" in the chat, with no prompt; Manual asked. In Claude Code, modes that approve tools on their own, such as auto mode or skipping permissions, have the same effect.

Saving attachments

save_attachment is off unless APPLE_MAIL_SAVE_ATTACHMENTS is true. While it is off, the tool does not exist for the model.

"Save the PDF from Anna's last invoice and put it in my Accounting folder."

Claude calls save_attachment with a message id and the position of the attachment in attachmentNames of get_message. Mail saves that one attachment into a handover folder, and the tool returns the file path. The default folder is ~/Library/Caches/apple-mail-mcp/attachments. Every call gets its own subfolder with a random name like att-k3x9fa, mode 0700. Claude then moves the file where you want it and reads it with its own tools. Nothing is overwritten, and nothing is deleted automatically: clean the folder yourself now and then.

Like moving, saving needs the Message-ID header, so it does not work on macOS 15, where Mail does not store it: every call returns skipped_no_message_id.

If the attachment was not downloaded yet, Mail downloads the attachment from the server first. It then stays in Mail's local storage, as if you had opened the message.

Set APPLE_MAIL_ATTACHMENT_DIR to use another folder, as an absolute path or starting with ~/. macOS protects some folders: ~/Downloads needs its own permission for the program that runs the server, Claude Desktop or your terminal, and macOS asks for it on the first save. The folder is checked only when saving is on.

Limits, all set in the environment:

  • A file larger than APPLE_MAIL_MAX_ATTACHMENT_BYTES is refused (default 25 MB, at most 100 MB).
  • Only file types in APPLE_MAIL_ATTACHMENT_TYPES are saved. Executable types such as app, dmg, sh, js or py are never allowed; naming one in the variable is a configuration error.
  • Security mails are never saved, whatever APPLE_MAIL_SHOW_SECURITY_MAILS says.
  • The account must be in APPLE_MAIL_ACCOUNTS and have a name that Mail can address unambiguously. Gmail and Exchange accounts are allowed for saving but untested; only mailbox.org (IMAP) has been tried.

Saved files are untrusted content from a third party. Do not open them because a mail asks you to.

What you need beside it

This package needs the read server beside it. The read server lists mailboxes and finds messages; this server only takes the ids it returns. Install @redpop/apple-mail-mcp first and give it Full Disk Access as its README describes.

Two settings must match across both servers, because neither server sees the other's configuration:

  • APPLE_MAIL_ACCOUNTS is required here. If it is empty, every call fails with CONFIG_INVALID; moving is never enabled for all accounts. Use the same list in the read server.
  • Set APPLE_MAIL_EXCLUDE_MAILBOXES in both servers. A mailbox hidden in the read server but not here would still be a possible target.

Junk and trash are not visible by default, in either server.

What it moves, and what it refuses

Targets are all visible mailboxes except trash, junk, drafts, sent and "all mail". Sources must be visible under the same rules, so junk and trash are not sources by default. Further targets can be forbidden with APPLE_MAIL_MOVE_EXCLUDE_TARGETS.

Each message gets one status. moved means the index of Mail shows it in the target and no longer in the source. moved_unverified means the move was requested but the index did not confirm it within 10 seconds. Both describe the local state in Mail, not the mail server. failed and the skipped_* statuses say why a message did not move; nothing was changed for those.

Message ids are valid for the current index only. After Mail rebuilds a mailbox, or after a skipped_not_found status, search again and use the new ids.

Messages are skipped, never moved, in these cases:

  • The message looks like a security mail (verification code, password reset, sign-in link). The check looks at the subject only; the message text is not read. APPLE_MAIL_SHOW_SECURITY_MAILS does not lift it.
  • The message was moved in the last 5 minutes. Rapid back and forth can create a copy on the mail server, so each moved message is locked for 5 minutes, across processes. Moves you make yourself in Mail are not known to the lock.
  • The message is visible in several mailboxes and sourceMailboxId does not pick one.
  • The message has no Message-ID header in Mail's index. On macOS 15 Mail does not store it, so the tool cannot move anything there. doctor says so.
  • The source and target are the same, or in different accounts.
  • The account is not supported. Only mailbox.org has been tested. Other IMAP providers are untested: they run without a refusal, so limit APPLE_MAIL_ACCOUNTS to accounts you are willing to try. Gmail, Exchange and local folders are refused for moving.
  • A folder name differs from another folder of the account only in case, or contains control characters.

Moves run one after another, never in parallel, and are never retried: a failed move may have arrived halfway.

A folder that never held a message is not in Mail's index, so it does not appear in list_mailboxes and cannot be a target. Put one message in it by hand first.

Subfolders and INBOX have had one manual test: on 2026-11-04, on macOS 27 with one IMAP account at mailbox.org, one test mail was moved to a subfolder and back, and one test mail to INBOX and back, 60 seconds apart, with no copy in the webmail. These were single test mails, not a series.

Requirements

  • macOS 26 or later to move mail. The server starts on macOS 15, but Mail there does not store the Message-ID header, so every move is refused with skipped_no_message_id; the server never moves a message it cannot identify by its Message-ID. Verified with a real mailbox only on macOS 27 with Mail 16 and one mailbox.org account.
  • Node.js 22.16 or newer in the 22 line, or 24 and newer.
  • The read server @redpop/apple-mail-mcp at the same version, with Full Disk Access.
  • Mail must be running. The server never starts it; without it the call fails with MAIL_NOT_RUNNING.

Install

Claude Code, as a plugin:

/plugin install apple-mail-actions-mcp --marketplace redpop/apple-mail-mcpnpx -y @redpop/apple-mail-actions-mcp setup

Claude Code without the plugin:

bash
claude mcp add apple-mail-actions \  -e [email protected] \  -e APPLE_MAIL_EXCLUDE_MAILBOXES=Archive \  -- npx -y @redpop/apple-mail-actions-mcpnpx -y @redpop/apple-mail-actions-mcp setup

Claude Desktop and Cowork: download apple-mail-actions-mcp-<version>.mcpb from the latest release and open it. It carries both apps and needs no npm. It has the same settings page. Claude Desktop does not switch it on after the install, because the accounts setting is required; enter the accounts, save, and switch it on under Settings > Extensions. The plugin does not work in Cowork, which starts a plugin's local server inside its Linux virtual machine, away from Mail, or in the desktop chat, which ignores such servers.

setup first runs the setup of the read server (Full Disk Access for its helper), then asks macOS for the Automation permission of "Mail MCP Actions" to control Mail. Mail must be running for the dialog to appear. The permission goes to that small app alone, not to Claude, your terminal or Node. It can be switched off under System Settings > Privacy & Security > Automation.

Configuration

Set these in the environment of the server. They cannot be changed through tool parameters. An invalid value does not stop the server; every call then fails with CONFIG_INVALID naming the setting. The server reads them once, at startup: restart the client after a change.

VariableDefaultMeaning
APPLE_MAIL_ACCOUNTSrequiredComma-separated allowlist of accounts, by UUID, address or name. Empty is an error, not "all accounts".
APPLE_MAIL_INCLUDE_JUNKfalseTreat mailboxes with the junk role as visible. Same meaning as in the read server.
APPLE_MAIL_INCLUDE_TRASHfalseTreat mailboxes with the trash role as visible. Same meaning as in the read server.
APPLE_MAIL_EXCLUDE_MAILBOXESemptyComma-separated mailboxes to hide, by name or by path with /. Set it in both servers.
APPLE_MAIL_MAX_MOVES25Upper bound for the number of messages in one call (1 to 100).
APPLE_MAIL_MOVE_EXCLUDE_TARGETSemptyComma-separated mailboxes that are never a target, by name or by path with /.
APPLE_MAIL_SAVE_ATTACHMENTSfalsetrue registers the save_attachment tool. Off, the tool does not exist.
APPLE_MAIL_ATTACHMENT_DIR~/Library/Caches/apple-mail-mcp/attachmentsHandover folder for saved attachments, absolute or starting with ~/. Checked only when saving is on.
APPLE_MAIL_MAX_ATTACHMENT_BYTES26214400Largest attachment that is saved, in bytes (1 to 104857600).
APPLE_MAIL_ATTACHMENT_TYPESpdf,png,jpg,jpeg,heic,gif,txt,csv,ics,vcf,docx,xlsx,pptx,odt,ods,zipComma-separated file extensions that may be saved. Executable types are always refused.
APPLE_MAIL_ACTIONS_PATHnot setDevelopment only: path to a Dev or Ad hoc build of the Actions app. A bundle with the release bundle id is refused.

The settings of the read server that do not appear here, for example body search, do not affect this package.

Install from source

You need the Xcode Command Line Tools and an Apple Development certificate for a build that keeps its permission across rebuilds.

bash
git clone https://github.com/redpop/apple-mail-mcp.gitcd apple-mail-mcpnpm cinpm run build && npm run build:helpernpm run build --workspace packages/actions && npm run build:helper --workspace packages/actions

Then follow the README of the read server for its helper, and grant Automation with node packages/actions/dist/index.js setup, with APPLE_MAIL_ACTIONS_PATH and APPLE_MAIL_HELPER_PATH pointing at the Dev bundles in each bin/ directory. Never sign these builds with a Developer ID.

Put these variables in front of the command instead of exporting them. An exported APPLE_MAIL_* variable stays in the shell, and every MCP server that a client started from that shell inherits it: an exported APPLE_MAIL_ACCOUNTS also limits the read server to those accounts. If you exported them, run unset on them before you start the client.

Diagnostics

bash
npx -y @redpop/apple-mail-actions-mcp doctor

doctor runs the checks of the read server, then checks the Actions app and its signature, the Automation permission, whether Mail is running, whether the Message-ID column exists and which accounts are supported. Without --verbose it names no accounts or addresses. Exit code 1 means at least one check failed.

Privacy Policy

This policy covers the server and the Actions app, as published on npm and in the GitHub releases. It adds to the policy of the read server.

What is collected

Nothing is collected by the author or by any service. The server has no telemetry, and neither the server nor the app opens a network connection. The app never sees mail content. It receives a message number, a Message-ID and the names of an account and two mailboxes, and returns a status. For save_attachment it also receives the part id and file name of one attachment and a slot name for the handover subfolder.

How it is used and stored

When your AI client calls move_messages, the app asks Mail to move the messages you named. The server writes one file, move-locks.json, under ~/Library/Application Support/apple-mail-mcp/, directory 0700, file 0600. It holds the internal message numbers of recently moved messages and the time their lock ends. No names or subjects.

With APPLE_MAIL_SAVE_ATTACHMENTS on, save_attachment has Mail write one attachment into the handover folder, which stays on your Mac until you delete it. The server and the app do not read the file.

Sharing with third parties

Nothing is shared. Mail itself synchronizes the move with your mail server, as it does for a move you make by hand. The statuses of a call go back to your AI client.

Retention

Entries leave the lock file after 5 minutes at the next move. Delete the file at any time. The server never deletes or changes anything under ~/Library/Mail itself; the moves are Mail's.

Contact

Questions about this policy: open an issue at https://github.com/redpop/apple-mail-mcp/issues. Security problems: report them privately as SECURITY.md describes.

License

MIT, see LICENSE.

来源:packages/actions/README.md,提交 daf547d

工具

0
SourceWeft 曾在隔离沙箱中以无凭据方式启动该软件包一次,以列出其工具,但未能完成:软件包安装失败。

版本历史

2
  1. v0.4.0最新Nov 14, 2026
  2. v0.3.2Nov 12, 2026

评分

已满足适用检查项的 50%

该评分衡量此收录条目的完整程度,依据注册中心条目、端点与公开来源计算得出。它不是对服务器本身的评价,也不表示服务器安全或当前可用:可连通性是带日期的检查结果,评分也不包含安装量或用户评价。

  • 近 30 天内可连通25 分

    请保持端点能够响应 MCP 握手;SourceWeft 每 30 天探测一次。

  • 已声明认证方式10 分

    请在注册中心条目中声明凭据请求头,或保持端点能够响应探测,以便判定其认证方式。

  • 已列出工具15 分

    请让服务器在无凭据时响应 tools/list,或发布可在沙箱中无凭据启动的软件包。

  • 描述必需15 分
  • 图标10 分
  • 文档15 分
  • 许可证10 分

其他 Actions 集成