SMS Everyone MCP by usefulapi

io.usefulapi由 usefulapi.io 发布官方发布者v1.7.3更新于 Nov 7, 2026

Send confirmed SMS, check credits, delivery and replies, and manage opt-outs with SMS Everyone.

发布方自己的服务:Ably MCP by usefulapi

已验证Streamable HTTP可网页运行沟通与协作商业与电商

概览

AI 生成的概览

通过 SMS Everyone 账户发送短信,并查询余额、活动状态、送达回执、回复、联系人列表和退订名单。

可以做什么
  • 查看账户设置、剩余短信额度和短信功能开关
  • 向最多 25 个号码发送一条短信或安排活动,并取消或暂停活动
  • 读取活动状态和每个号码的送达回执
  • 按时间范围列出收到的回复
  • 列出并读取已存手机号码的联系人列表
  • 列出退订号码,并把号码加入退订库
适用场景
适合让助手直接向客户或联系人发送或定时发送短信,并跟进送达、回复和退订情况,无需打开 SMS Everyone 后台。也适合快速查看剩余额度和活动状态。
运行要求
以 URL 方式添加的远程 MCP 端点;服务器通过 OAuth 登录,登录页要求填写 SMS Everyone 的 API 用户名和密码。发送需要已注册的发送方标识(originator)。需要能访问该托管端点。
安装前请注意
发送会向真实的人发出真实短信并消耗 SMS Everyone 额度;长短信或 Unicode 短信可能消耗多条额度,已发送的短信无法撤回。写入类工具会修改或删除数据,使用前应确认。免费方案每月 50 次工具调用;付费方案通过结账链接付款。送达和回复轮询每个账户至少有一分钟冷却。

安装

在 SourceWeft 中

  1. 打开 控制台中的 SMS Everyone MCP by usefulapi,将其添加到工作区。
  2. 为需要使用其工具的对话启用该服务。

Web executable,通过 Streamable HTTP。 远程服务在工作区中配置后即可从网页运行时运行。

交给智能体安装

把这段提示词粘贴到 Claude Code、Codex、Cursor 等智能体,或 SourceWeft 对话中。智能体会读取该服务器的安装指南,先向你展示发布者、端点和登录方式,经你同意后再把它添加到你的客户端。密钥不会写进任何命令。

阅读 https://sourceweft.com/mcp/io.usefulapi%2Fsms-everyone/install.md,并按其中说明把这个 MCP 服务器接入我的客户端。修改任何配置之前,先告诉我它的发布者、端点和登录方式,等我确认。不要把 API 密钥写进命令或我会提交的文件;问我密钥应从哪里获取。

查看智能体所依据的安装指南

其他 MCP 客户端

把它添加到你客户端的 mcpServers 配置中。

{
  "mcpServers": {
    "sms-everyone-by-usefulapi": {
      "type": "http",
      "url": "https://sms-everyone.usefulapi.io/mcp"
    }
  }
}

README

SMS Everyone MCP by usefulapi

Connect your assistant at https://sms-everyone.usefulapi.io/mcp.

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://sms-everyone.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http sms-everyone https://sms-everyone.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
json
{  "mcpServers": {    "sms-everyone": {      "url": "https://sms-everyone.usefulapi.io/mcp"    }  }}

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your SMS Everyone credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/sms-everyone/

Enter the API username and password SMS Everyone issued for your account. Use your registered originator when sending messages. If you need API credentials, request them from SMS Everyone through its normal account signup or support process.

Writes require explicit confirmation. Sending or scheduling messages uses your SMS Everyone credits; long or Unicode messages can cost multiple credits. This connector limits each send to 25 explicit recipients.

Delivery and reply polling have a shared cooldown of at least one minute per account and endpoint across hosted connections. The vendor recommends polling every five minutes. Reply reads always use a date window, preserving unread status.

A send acknowledgement means the vendor accepted the request; delivery receipts report delivery separately. If a write outcome is uncertain, check the SMS Everyone dashboard before trying again.

Tools

ToolTypeWhat it does
smseveryone_get_accountreadGet account settings and credits
smseveryone_get_campaign_statusreadGet campaign status
smseveryone_get_delivery_statusreadGet delivery status
smseveryone_list_repliesreadList SMS replies
smseveryone_list_optoutsreadList opted-out numbers
smseveryone_list_contact_listsreadList contact lists
smseveryone_get_contact_listreadGet the numbers in a contact list
smseveryone_send_smswriteSend SMS
smseveryone_cancel_campaignwriteCancel a scheduled campaign
smseveryone_pause_campaignwritePause a campaign
smseveryone_add_optoutswriteOpt numbers out
smseveryone_usage_statusmetaUsage status (free-tier meter)
smseveryone_request_featuremetaRequest a missing feature
smseveryone_upgrademetaUpgrade to Pro or Pro+
smseveryone_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per SMS Everyone account)$9/mo or $90/yr (2 months free)Unlimited*

*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to [email protected].

Pro covers this server only. Subscribe with smseveryone_upgrade (it returns a Stripe Checkout link). Cancel any time with smseveryone_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running smseveryone_upgrade before then undoes the cancel. Or write to [email protected].

License

MIT. An independent integration by usefulapi; not affiliated with SMS Everyone.

来源:servers/sms-everyone/README.md,提交 4046075

工具

11

smseveryone_get_account

Get account settings and credits

Show the SMS Everyone account: user id, remaining SMS credits, whether unicode (emoji, non-English text) is enabled and whether international messaging is allowed. SMS Everyone REST: POST /api/RetrieveUserSettings.

无需输入参数。

smseveryone_get_campaign_status

Get campaign status

Show whether a sent or scheduled campaign is Scheduled, Running, Paused or Deleted. SMS Everyone REST: POST /api/campaign with Action status.

输入参数campaign_id必填

smseveryone_get_delivery_status

Get delivery status

Delivery receipts of a campaign: one entry per destination with a timestamp, a DeliveryReceiptStatusId and a carrier code. Pass destination to see one number only. An empty list means no receipt has arrived yet (carriers can take up to 24 hours) or the campaign id is not on this account. SMS Everyone asks for no more than one request per minute in production. SMS Everyone REST: POST /api/DRStatus.

输入参数limitoffsetcampaign_id必填destination

smseveryone_list_replies

List SMS replies

List SMS replies received on the account: received time, the sender's number (Originator), the account number it was sent to (Recipient), the text and a reference id. Always asks for a time window (the last `days` days, 1 to 7, counted back to 12am yesterday for 1, or a date range of at most 30 days), which leaves the replies available for later calls. Default: days 1. Production polling is limited to once per minute per account through this MCP; five minutes is recommended. SMS Everyone REST: POST /api/replies.

输入参数dayslimitoffsetdate_enddate_start

smseveryone_list_optouts

List opted-out numbers

List phone numbers in the account's optout database (messages to them are never sent): number, date added, reason. The API returns the whole list; this tool shows the first `limit` entries and the total. SMS Everyone REST: POST /api/optouts with Action list.

输入参数limitoffset

smseveryone_list_contact_lists

List contact lists

List the stored lists (CRM groups) of mobile numbers: list id (CrmId), description and number count. SMS Everyone REST: POST /api/crm with Action list.

输入参数limitoffset

smseveryone_get_contact_list

Get the numbers in a contact list

Show the mobile numbers stored in one list. The API returns the whole list; this tool shows the first `limit` numbers and the total count. SMS Everyone REST: POST /api/crm with Action details.

输入参数limitoffsetlist_id必填

smseveryone_send_sms

Send SMS

WRITE: SENDS REAL SMS to real people and SPENDS CREDITS from the user's SMS Everyone account; a sent message cannot be recalled (a campaign scheduled for later can be cancelled with cancel_campaign). One message text to 1 to 25 phone numbers in international format without "+" (e.g. 61400123456 for Australia, 6421123456 for New Zealand). Cost = credits per part x number of parts x recipients: a text is 160 characters per part (153 when longer), and one emoji or non-English character makes it unicode: 70 characters per part (67 when longer), more credits. Numbers on the account's optout list are skipped. The originator is where the message appears to come from and must be one registered with SMS Everyone for the account (an Australian alphanumeric sender must be ACMA registered). Optional time_scheduled (YYYYMMDDHHmm in the account's time zone; a time in the past sends at once). Only send what the user explicitly asked for; confirm the text, recipients and sender first. No stored lists, no bulk. SMS Everyone REST: POST /api/campaign with Action create.

输入参数confirm必填message必填originator必填destinations必填time_scheduled

smseveryone_cancel_campaign

Cancel a scheduled campaign

WRITE: deletes a scheduled SMS campaign so it is not sent. Only works before the campaign start time (afterwards SMS Everyone refuses it with an error code). It cannot be undone. SMS Everyone REST: POST /api/campaign with Action delete.

输入参数confirm必填campaign_id必填

smseveryone_pause_campaign

Pause a campaign

WRITE: pauses a scheduled campaign (or one that is sending; SMS Everyone sends over 1000 messages a second, so a running campaign usually finishes first). A campaign scheduled in the past cannot be paused. This server has no way to resume it: the user must do that in SMS Everyone. SMS Everyone REST: POST /api/campaign with Action pause.

输入参数confirm必填campaign_id必填

smseveryone_add_optouts

Opt numbers out

WRITE: adds 1 to 25 phone numbers to the account's optout database, so no later campaign is sent to them. This server cannot opt a number back in. Do it only when the user asks. SMS Everyone REST: POST /api/optouts with Action add.

输入参数confirm必填numbers必填

版本历史

11
  1. v1.7.3最新Nov 7, 2026
  2. v1.6.3Nov 5, 2026
  3. v1.6.2Nov 5, 2026
  4. v1.6.1Nov 4, 2026
  5. v1.6.0Nov 3, 2026
  6. v1.5.1Nov 3, 2026
  7. v1.4.0Nov 1, 2026
  8. v1.2.0Oct 31, 2026
  9. v1.1.0Oct 31, 2026
  10. v1.0.2Oct 30, 2026
  11. v1.0.0Oct 30, 2026

评分

已满足适用检查项的 100%

该评分衡量此收录条目的完整程度,依据注册中心条目、端点与公开来源计算得出。它不是对服务器本身的评价,也不表示服务器安全或当前可用:可连通性是带日期的检查结果,评分也不包含安装量或用户评价。

  • 近 30 天内可连通必需25 分
  • 已声明认证方式必需10 分
  • 已列出工具必需15 分
  • 描述必需15 分
  • 图标10 分
  • 文档15 分
  • 许可证10 分

其他 Usefulapi 集成