AnchoredIP

com.anchoredip由 anchoredip.com 發布官方發布者v1.3.0更新於 Oct 30, 2026

Dedicated static outbound IPv4 over WireGuard. Free 7-day trial, no card, no sales call.

已驗證Streamable HTTP可網頁執行雲端與基礎設施安全與監控

概覽

AI 產生的概覽

AnchoredIP 透過 WireGuard 通道出租專用靜態 IPv4/IPv6 位址,讓助理下單、查詢並管理這些租約。

可以做什麼
  • 檢視方案目錄、即時價格與可用的付款方式
  • 下單租約(免費試用或付費)並查詢其狀態、位址、通道與續約時間
  • 建立與撤銷 WireGuard 通道,回傳對端設定檔
  • 將租約續訂到付費方案,並開關信用卡自動續約
  • 為租約位址發布或移除反向 DNS(PTR)記錄
適用情境
適用於合作夥伴要求固定來源位址、而目前平台出口 IP 不斷變動導致介接被阻擋的情況,或需要把專用靜態 IP 交付到使用者既有伺服器的情境。
執行需求
遠端端點 api.anchoredip.com,使用 streamable HTTP,不需本機套件。下單不需帳號或信用卡,但 order_lease 回傳的 access_token 是該租約後續所有呼叫的唯一憑證。目標機器需能執行 WireGuard 用戶端。
安裝前請注意
order_lease 會建立真實訂單,付費方案在付款前一直處於待處理狀態,可能產生費用;renew_lease 會開立帳單,set_autorenew 控制信用卡扣款。access_token 是租約唯一憑證且只顯示一次。通道設定含從不儲存的私鑰,必須完整交給使用者。revoke_tunnel 與 set_reverse_dns 會改動線上網路設定,且不一定能復原。

安裝

在 SourceWeft 中

  1. 開啟 儀表板中的 AnchoredIP,將其新增到工作區。
  2. 為需要使用其工具的對話啟用該服務。

Web executable,透過 Streamable HTTP。 遠端服務在工作區中設定後即可從網頁執行環境執行。

交給代理程式安裝

把這段提示詞貼上到 Claude Code、Codex、Cursor 等代理程式,或 SourceWeft 對話中。代理程式會讀取該伺服器的安裝指南,先向你展示發布者、端點和登入方式,經你同意後再把它新增到你的客戶端。金鑰不會寫進任何命令。

閱讀 https://sourceweft.com/mcp/com.anchoredip%2Fanchoredip/install.md,並按其中說明把這個 MCP 伺服器接入我的客戶端。修改任何設定之前,先告訴我它的發布者、端點和登入方式,等我確認。不要把 API 金鑰寫進命令或我會提交的檔案;問我金鑰應從哪裡取得。

檢視代理程式所依據的安裝指南

其他 MCP 客戶端

把它新增到你客戶端的 mcpServers 設定中。

{
  "mcpServers": {
    "anchoredip": {
      "type": "http",
      "url": "https://api.anchoredip.com/api/mcp/"
    }
  }
}

工具

8

list_plans

The published catalogue with live prices and which payment methods each plan accepts. Prices are never hardcoded; read them here.

無需輸入參數。

order_lease

Place an order. The trial plan is free and activates immediately; paid plans return payment details and stay pending until settled. No account or card is needed to order. A second trial for the same billing email is refused — order a paid plan instead, which needs no approval.

輸入參數plan必填country必填billing_email必填organization_name必填

lease_status

Everything about one lease: whether it is active, which addresses it holds, its tunnels and when it renews.

輸入參數access_token必填

create_tunnel

Provision a peer and return its WireGuard configuration. Three routing modes, and the right one depends on the machine. source (the default) sends only traffic from the leased address through us and leaves the default route alone — but it is written with wg-quick PostUp rules that invoke `ip`, so it runs on Linux under wg-quick and nowhere else. On macOS it aborts and deletes the interface. full works in every client but claims the default route, so it cannot run beside an always-on corporate VPN. destinations routes only the addresses you name. It needs no PostUp and takes no default route, so it runs in any client on any platform, and it matches what is usually being bought — one partner seeing a fixed address. It survives beside a VPN that installs a default route, but not one that captures traffic below the routing table. It cannot receive inbound connections from anywhere but those destinations.

輸入參數labeltransportaccess_token必填destinationsrouting_mode

revoke_tunnel

Retire a peer and hand its slot back to the plan's allowance. An agent that provisions a tunnel per short-lived worker and never revokes one exhausts the allowance and then cannot bring the next machine up. Revoking the peer that holds the public address stops inbound connections to it and cannot be undone by promoting another — only by bringing a new machine up.

輸入參數tunnel_id必填access_token必填

renew_lease

Raise an invoice for another term and keep the same addresses. This is how a trial becomes a paying customer: the address does not change, so whatever the customer's partner has already allowlisted goes on working. A trial cannot renew into itself, so name the plan to move to — called without one it returns the plans that can be moved to. Pressing it twice quotes the same reference rather than raising a second invoice.

輸入參數planaccess_token必填

set_autorenew

Stop this lease charging the customer's card again, or start it again. Only a card subscription can be stopped — a bank transfer is a payment the customer sends us, so there is nothing of ours to cancel. Stopping is not a cancellation: the lease runs to the end of the period already paid for, and the same call turns it back on.

輸入參數enabled必填access_token必填

set_reverse_dns

Publish a PTR record for an address on the lease. Live within a second; an empty hostname removes it.

輸入參數address必填hostname必填access_token必填

版本歷史

3
  1. v1.3.0最新Oct 30, 2026
  2. v1.2.0Oct 14, 2026
  3. v1.1.0Sep 16, 2026

評分

已滿足適用檢查項的 83%

該評分衡量此收錄條目的完整程度,依據註冊中心條目、端點與公開來源計算得出。它不是對伺服器本身的評價,也不表示伺服器安全或目前可用:可連通性是帶日期的檢查結果,評分也不包含安裝量或使用者評價。

  • 近 30 天內可連通必需25 分
  • 已宣告認證方式必需10 分
  • 已列出工具必需15 分
  • 描述必需15 分
  • 圖示10 分
  • 文件15 分

    請宣告包含 README 的 GitHub 儲存庫,或在 OAuth 受保護資源後設資料中提供 resource_documentation。

  • 授權條款不適用

    託管服務按其提供方的條款使用,因此這裡不要求授權條款。此檢查項不計入百分比。