Qemu Mcp

qemu-mcp

Let your AI agent boot an operating system and drive it.

qemu-mcp is an MCP server that gives AI agents (Claude Code, or any MCP client) hands on a QEMU virtual machine: boot an ISO or a raw kernel, press keys, take screenshots, read the serial console, and wait for boot markers — all headless, with zero cooperation from the guest. No SSH, no guest agent, no network. If it boots in QEMU, an agent can drive it.

[MORT OS terminal after the agent typed help — captured through qemu-mcp]

This screenshot was taken by an AI agent: it booted MORT OS (a hobby kernel with no SSH, no agent, no TCP required) headless, pressed Esc, typed help, and captured the framebuffer — four tool calls.

Who this is for

OS developers and hobby kernel hackers. The osdev inner loop is: edit kernel → build → boot in QEMU → look at the screen → type something → read serial → repeat. An AI agent can already do the edit and build steps; qemu-mcp gives it the rest of the loop, so it can boot-test its own kernel changes and actually see the triple fault.

It's equally useful for anyone who needs an agent to poke at a VM below the OS level: bootloaders, installers, BIOS/UEFI menus, recovery consoles, firmware.

Why another QEMU MCP server?

The existing ones assume a full, running guest OS — they exec commands over SSH or a guest agent. That's useless when your guest is a 40 KB kernel you wrote yourself, an installer ISO, or anything pre-boot. qemu-mcp is built for the boot-test loop instead:

• Serial console capture — continuously logged to a file, readable at any time (qemu_serial), and writable too (qemu_serial_send)
• qemu_wait_serial — block until "kernel ready" (or "login:", or your panic string) appears, the reliable way to sequence an automated boot test
• -kernel boot — boot a multiboot/bzImage kernel directly, with append/initrd
• Screenshots of the VGA framebuffer — works headless, shows exactly what a monitor would
• Raw QMP escape hatch — the full QEMU Machine Protocol when you need memsave, system_reset, device_add…

Tools

Multiple named VMs can run at once.

Every tool declares all four MCP behaviour hints, so your client knows which calls to confirm with you. Only the waiting and reading tools (qemu_screenshot, qemu_serial, qemu_wait_serial, qemu_wait_screen, qemu_snapshot_list, qemu_version) are read-only. qemu_boot and qemu_list are marked destructive because they clean up VMs that exited on their own, deleting their serial logs; read a crashed guest's output with qemu_serial first. qemu_boot and qemu_qmp are open-world: extra_args and raw QMP can reach anything QEMU can.

Install

Requirements: Python 3.10+, and QEMU on your PATH (on Windows, C:\Program Files\qemu is found automatically, or set QEMU_DIR).

pip install qemu-mcp

Claude Code:

claude mcp add qemu -- qemu-mcp

Any other MCP client (stdio transport):

{  "mcpServers": {    "qemu": {      "command": "qemu-mcp"    }  }}

Or without installing, via uv: claude mcp add qemu -- uvx qemu-mcp

Example session

you: boot build/os.iso and check the shell works

agent: qemu_boot(name="test", iso="build/os.iso", arch="i386") → booted qemu_wait_serial(name="test", text="boot ok") → FOUND qemu_type(name="test", text="help\n") qemu_screenshot(name="test") → sees the help output rendered qemu_stop(name="test", force=true) "Your ISO boots, the shell responds to help, and the new command is listed. Screenshot attached."

A typical kernel test the agent can run by itself:

qemu_boot(name="k", kernel="build/kernel.elf", arch="i386",          extra_args="-device rtl8139,netdev=n0 -netdev user,id=n0")qemu_wait_serial(name="k", text="MORTNET READY", timeout_s=20)qemu_serial_send(name="k", text="net\n")  # guest has no keyboard driver, only a serial shellqemu_serial(name="k")          # did DHCP bind?qemu_screenshot(name="k")      # what does the console show?

Non-x86 archs

x86_64 and i386 boot with no machine argument. Other archs have no default machine in QEMU and need -M set explicitly, or they'll fail to boot:

qemu_boot(name="a", kernel="build/kernel-aarch64.elf", arch="aarch64", machine="virt")qemu_boot(name="r", kernel="build/kernel-riscv64.elf", arch="riscv64", machine="virt")

Check qemu-system-<arch> -M help for the full list of machines an arch supports.

virt has no default display device — unlike the PC-family boards x86_64/ i386 boot with, it doesn't wire up VGA on its own. qemu_screenshot/ qemu_wait_screen against a virt VM will see an empty/black framebuffer (or a QMP error, depending on QEMU version) unless the guest itself sets one up, which most bare-metal aarch64/riscv64 kernels don't. Add a display device explicitly if you need screenshots:

qemu_boot(name="a", kernel="build/kernel-aarch64.elf", arch="aarch64",          machine="virt", extra_args="-device virtio-gpu-pci")

(This is documented QEMU virt-board behavior, not verified against a real boot in this environment — no QEMU available here.)

Hardware acceleration

qemu_boot defaults to TCG (QEMU's software emulator) with no accel given - correct on any host, but a real slowdown for anything beyond a trivial kernel. Opt into your host's accelerator with accel, falling back to TCG if it's unavailable so the boot doesn't hard-fail on a host without it:

qemu_boot(name="fast", kernel="build/kernel.elf", accel="kvm:tcg")   # Linuxqemu_boot(name="fast", kernel="build/kernel.elf", accel="hvf:tcg")   # macOSqemu_boot(name="fast", kernel="build/kernel.elf", accel="whpx:tcg")  # Windows

If the requested accelerator genuinely isn't usable on the host (no /dev/kvm permission, virtualization disabled in firmware, etc.) QEMU itself reports why QEMU exited, and qemu_boot surfaces that in the error it raises.

CPU model

qemu_boot defaults to QEMU's own default CPU model for the arch/machine. Pass cpu (QEMU -cpu) to test guest code against a specific model or feature set instead:

qemu_boot(name="k", kernel="build/kernel.elf", cpu="qemu64,+avx")  # base model + one extra featureqemu_boot(name="k", kernel="build/kernel.elf", cpu="max")          # every feature QEMU/TCG can emulateqemu_boot(name="k", kernel="build/kernel.elf", accel="kvm", cpu="host")  # pass the host CPU through under KVM

Check qemu-system-<arch> -cpu help for the full list of models/features an arch supports.

CPU topology

smp alone sets a flat vCPU count. For guest code that cares about the socket/core/thread shape (ACPI MADT entries, CPUID topology leaves, per-socket vs. per-core scheduling), pass smp_cores/smp_threads/ smp_sockets/smp_maxcpus too - they're combined onto the same -smp flag:

qemu_boot(name="k", kernel="build/kernel.elf",          smp=8, smp_cores=4, smp_threads=2, smp_sockets=1)# -> -smp 8,cores=4,threads=2,sockets=1

smp itself is optional when the topology params are given - QEMU can infer the total CPU count from cores/threads/sockets.

Host port forwarding

To reach a guest service (SSH, a web server under test) from the host without needing QEMU's NIC/chipset flags, pass hostfwd (QEMU's hostfwd rule):

qemu_boot(name="k", disk="build/linux.qcow2", hostfwd="tcp::2222-:22")# host:2222 -> guest:22, e.g. ssh -p 2222 user@localhost

This adds -netdev user,id=net0,hostfwd=... and -device e1000,netdev=net0 for you - the guest needs its own e1000 driver, which most general-purpose OSes (Linux included) already have built in. For a bare-metal kernel with its own NIC driver (like the rtl8139 example above), use extra_args instead - hostfwd is for forwarding a port to a guest that already has working networking, not for picking which NIC a from-scratch kernel talks to.

Debugging the kernel

qemu-mcp lets an agent see a crash. To find out why it happened, pair it with gdbstub-mcp. Boot with QEMU's gdbstub on and an interrupt log:

qemu_boot(name="k", kernel="build/kernel.elf",          extra_args="-s -S -d int,cpu_reset -D int.log -no-reboot")

Then the agent can debug_connect with the kernel ELF, set breakpoints on symbols or file.c:line, read registers and memory, and get backtraces. If the VM triple faults, debug_explain_fault turns int.log into the exception chain and its root cause. No gdb binary is needed.

Tests

[CI]

Unit tests for the character/key-name -> QMP qcode translation in keys.py, the screen-fraction -> QMP pointer-event translation in mouse.py, the serial chardev args and reconnect logic in serial.py, the framebuffer stability tracker in screen.py, the snapshot tag validation and HMP command-line building in snapshot.py, the QMP client's error handling in qmp.py, the missing-binary error path, the __version__/pyproject.toml version-drift guard in test_version.py, the pinned tool behaviour hints (readOnlyHint/destructiveHint/idempotentHint/openWorldHint) in test_tool_hints.py, and an MCP stdio handshake smoke test all need no QEMU install - this is what CI runs on every push:

pip install -e ".[test]"ruff check src testsmypy --strict srcpytest tests/test_keys.py tests/test_mouse.py tests/test_screen.py tests/test_snapshot.py tests/test_serial.py tests/test_qmp.py tests/test_vm.py tests/test_stdio_handshake.py tests/test_tool_hints.py tests/test_version.py

There's also an end-to-end test that boots a real ISO and exercises every tool:

QEMU_MCP_TEST_ISO=path/to/anything-bootable.iso python tests/smoke_test.py

qemu_snapshot_save/qemu_snapshot_load need a qcow2 disk rather than an ISO, so they're only exercised if you also set QEMU_MCP_TEST_QCOW2 to a qcow2 disk image (booted as a second VM alongside the ISO one).

Notes

• VMs run headless (-display none); screenshots still work because QEMU keeps rendering the VGA framebuffer.
• Serial output requires the guest to write to COM1 (most hobby kernels and all Linux console=ttyS0 setups do). Guests that only draw to VGA are still fully drivable via screenshots + keys.
• qemu_stop tries ACPI powerdown first; hobby kernels usually ignore it and get killed after a grace period — use force=true to skip the wait, or raise graceful_timeout_s (default 10s) for a guest that legitimately needs longer to shut down cleanly.
• qemu_stop waits briefly (up to 5s, best-effort) for any in-flight qemu_wait_serial/qemu_wait_screen/qemu_screenshot/qemu_serial_send/qemu_qmp/qemu_change_media/qemu_type/qemu_key/qemu_mouse/qemu_pause/qemu_resume/qemu_snapshot_save/qemu_snapshot_load/qemu_snapshot_delete/qemu_snapshot_list call against the same VM to finish before closing its QMP/serial connections and removing its temp directory, so a call racing a concurrent stop sees a clean result instead of an error from a handle closed out from under it.
• This server launches QEMU processes on your machine with files you point it at. extra_args is passed to QEMU verbatim — same trust level as running QEMU yourself.

Changelog

See CHANGELOG.md.

Contributing

See CONTRIBUTING.md for the exact local setup and checks CI runs.

License

MIT