LetsFG — Flights & Hotels

Real prices: LetsFG vs Google Flights

We searched 5 routes on Google Flights and LetsFG on the same day (2026-08-05), for flights departing 2026-09-16. Same airline, same number of stops — LetsFG was cheaper every time:

$133 cheaper across 5 routes in a verified comparison (2026-08-05). LetsFG returns the same prices however often you run the search, because it doesn't track you.

Why the difference? LetsFG compares the same flight across many sellers — Skyscanner, Kayak, Momondo, plus airline websites (Ryanair, United, Southwest, EasyJet, Spirit, Norwegian, AirAsia, and more) — and shows the cheapest. No cookie tracking: the same search returns the same prices however often you run it.

Real hotel prices: LetsFG vs Booking.com

Same hotel, same room type, same 2-night stay, same free-cancellation policy — checked on the same day (2026-08-05) for a 2026-09-16 check-in:

$207 cheaper across 3 hotels in a verified comparison (2026-08-05), matching each property's own free-cancellation rate against Booking.com's free-cancellation rate for the identical dates and room type. Prices quoted in PLN at booking, converted to USD at that day's rate.

Why the difference? LetsFG's price does not rise with demand or with who is searching, and there is no loyalty-program cross-subsidy. At booking the price is held on your card, not taken, and it is charged only once the hotel confirms. The comparison above uses free-cancellation rates on both sides; LetsFG also sells non-refundable rates, and every offer says which it is.

Try it right now — no install needed

Human users: Use letsfg.co and search flights instantly in your browser:

Search any route, compare live results, and book the flights you want — no installation needed.

Agents / scripts (free server-side): Get a Bearer token by putting a payment method on file (nothing is charged) → use POST /api/search and POST /api/agent-book. This is PFS — Programmatic Flight Search powered by the letsfg.co engine. Search is free; the token is short-lived and refreshes itself. See letsfg.co/for-agents for the full guide.

When you're ready to integrate it into your own agent, keep reading.

Three ways to use LetsFG

• MCP / CLI / SDK (Path 1): add https://letsfg.co/mcp as an MCP server in Claude, ChatGPT, Cursor or Windsurf and approve the connection. The consent step opens letsfg.co/connect: one tap, no card. The card is asked for at the first booking (any card, or Revolut Pay / Google Pay) in a 0.00 Revolut setup: nothing is charged, no Revolut account is needed, and card details go to Revolut, never to LetsFG. The token you get back searches for free, and once the card is added the same token books. The Python and JS SDKs read that token from LETSFG_BEARER_TOKEN or ~/.letsfg/config.json and apply the open-source ranking algorithm locally. (letsfg auth runs this same connect flow from the terminal: it registers itself as an OAuth client, opens letsfg.co/connect in a browser for a person to approve, and stores the token.)

• PFS — Programmatic Flight Search (Path 2): For scripts and agents that call the API directly. letsfg.co is human-only by default (Cloudflare Turnstile + bot protection), so the token from the connect flow is the only programmatic way in. Send it on every request:

  1. Search: POST https://letsfg.co/api/search with Authorization: Bearer <token> → { search_id }
  2. Poll: GET https://letsfg.co/api/results/<search_id> (never counts against the rate limit)
  3. Book: POST https://letsfg.co/api/agent-book → { booking_ref } within seconds
  4. Wait: POST https://letsfg.co/api/agent-book/status with { booking_ref } every 20–30 s until completed (PNR), failed (hold released, nothing charged) or needs_attention

  POST /api/agent-access/request still answers 402 with add_card_url and these steps as JSON, so an agent that starts from the endpoint lands in the same place. The MPP lane (a wallet, no card) is unchanged: answer the WWW-Authenticate: Payment challenge ($0.01 once) and verify with Authorization: Payment. The Stripe setup_url / SetupIntent lanes were retired on 2026-09-02 and every token they issued was revoked; reconnect at letsfg.co/connect. Full guide and response schema: letsfg.co/for-agents.

• Developer API (Path 3): Server-side search and booking at letsfg.co/developers. Look-to-book search (200 free after every booking, then $0.01), real booking through POST /flights/book on a connected Revolut method, full NL query parsing, a /discover endpoint that checks 20 destinations in one call (2–5 s), hotels, and a free sandbox at /sandbox/flights/* that simulates booking end to end (states, questions, failures, real timings). Full docs: letsfg.co/developers/api/docs.

Free server-side search: Use Path 1 or PFS — connect once at letsfg.co/connect (one tap, no card) and searches run free on our servers. No Playwright, no local install beyond the SDK.
Booking from your own product: Use the Developer API (Path 3) — look-to-book search, POST /flights/book, and no booking or transaction fee. Hotels work on both the token from the connect flow and a Developer API key.

Pricing

MCP / CLI / SDK / PFS = free search, real booking, no separate fee. Connect once (one tap, no card) and searching is free. The card is asked for at the first booking, in a 0.00 Revolut setup (nothing is charged). No credits, no unlock step. Booking works exactly like the website checkout: book_flight / POST /api/agent-book holds the price shown on your card, a LetsFG booking agent buys the ticket from the seller, and the hold is captured only once a real airline PNR exists. If the booking fails the hold is released and nothing is charged. The price you see is the price you pay; nothing is added at booking.

Hotels = the price on the offer, held then captured, on every path. Booking holds the full price on your card, LetsFG books and pays the hotel, and the hold is captured only once the hotel confirms; a failed booking releases it. There is no reservation fee, no deposit and no pay link. Every rate type is sold, and each offer says whether it is refundable and until when. See Hotels below.

Developer API = business use, look-to-book. letsfg.co/developers books flights itself — POST /flights/book holds the fare on your connected Revolut method and a LetsFG booking agent buys the ticket, exactly like the other paths. Search is not priced per call: you get 200 free searches after every booking you make, and booking resets the counter. Past that, blocks of 500 for $5.00 ($0.01 each). No booking fee, no transaction fee on top: the amount the search returned is the amount charged. Minimum top-up: $5.

The monthly per-search tiers ($0.50 / $0.20 / $0.10) were retired on 2026-09-08 along with Stripe. Payments are Revolut: POST /agents/connect-payment returns a one-time link that saves a card, and nothing is charged to connect.

💡 Know someone who travels? The more people discover LetsFG, the more airlines we cover — and the better it gets for everyone. ⭐ Star · Share with a friend

Why developers star this repo

Get started

Everything runs on our servers. One connection covers the MCP, the SDKs and the raw API.

🔌 MCP — connect once, search and book

Add the remote server and approve the connection. The consent step opens letsfg.co/connect: one tap, no card, and you are in. The card is asked for at the first booking (0.00 setup, nothing charged).

# Claude Codeclaude mcp add --transport http letsfg https://letsfg.co/mcp

// Cursor (~/.cursor/mcp.json) — Windsurf uses "serverUrl" instead of "url"{ "mcpServers": { "letsfg": { "url": "https://letsfg.co/mcp" } } }

Claude: LetsFG is in Claude's official connector directory. Open claude.ai/directory/letsfg, add it and approve the connection. No URL to paste. Once added, it works in Claude Desktop and the Claude phone app too.

ChatGPT: add it at chatgpt.com in a browser (the ChatGPT phone app has no way to add one): Plugins > Add > Add custom MCP server, URL https://letsfg.co/mcp, authentication OAuth, tick I understand, Create as a plugin. Once added, it works in the ChatGPT phone app too.

Then, in the chat: "find me the cheapest flight from London to Barcelona on June 15 and book it". search_flights returns offers; book_flight holds the fare on your card and starts a LetsFG booking agent; get_flight_booking reports the PNR when it lands (4–11 minutes).

🖥️ CLI / SDK — same token, ranking runs locally

pip install letsfgexport LETSFG_BEARER_TOKEN=<token from the connect flow>letsfg search LHR BCN 2026-06-15letsfg search LHR JFK 2026-06-15 --cabin C   # cabin class: M economy, W premium, C business, F first

The SDKs read the token from LETSFG_BEARER_TOKEN or ~/.letsfg/config.json. letsfg auth performs that connect flow itself: it registers as an OAuth client, opens https://letsfg.co/connect for a person to approve, and writes the token to ~/.letsfg/config.json. Add --no-browser to print the URL instead of opening one.

🔌 PFS — Programmatic Flight Search (free, server-side)

Run LetsFG's full search on our servers from any script. Access requires the token from the connect flow: letsfg.co is human-only (Cloudflare Turnstile), so that token is the only programmatic way in. Connecting is one tap and needs no card; the card is asked for at the first booking.

# 1. Search with the tokencurl -X POST https://letsfg.co/api/search \  -H "Authorization: Bearer <token>" \  -H "Content-Type: application/json" \  -d '{"origin":"LHR","destination":"BCN","date_from":"2026-06-15"}'# → {"search_id":"ws_abc123","status":"searching"}
# 2. Poll until done (keep going while split_ticket_pending is true)curl https://letsfg.co/api/results/ws_abc123 -H "Authorization: Bearer <token>"
# 3. Book — the fare is HELD on the card, a LetsFG agent buys the ticketcurl -X POST https://letsfg.co/api/agent-book \  -H "Authorization: Bearer <token>" -H "Content-Type: application/json" \  -d '{"search_id":"ws_abc123","offer_id":"wo_abc123","contact_email":"[email protected]",       "passenger":{"given_name":"Ada","family_name":"Lovelace","born_on":"1990-04-01","gender":"f",                    "nationality":"GB","phone_number":"+447700900000","phone_country":"GB",                    "address_line1":"1 Analytical Way","address_city":"London","address_postal":"N1 9GU","address_country":"GB"}}'# → {"booking_ref":"eyJ..."} within seconds
# 4. Wait for the PNR (every 20–30 s; a booking takes 4–11 minutes)curl -X POST https://letsfg.co/api/agent-book/status \  -H "Authorization: Bearer <token>" -H "Content-Type: application/json" \  -d '{"booking_ref":"eyJ..."}'# → {"state":"completed","pnr":"ABC123","charged_amount":93,"currency":"EUR"}

failed means the hold was released and nothing was charged; needs_attention means a human at LetsFG is checking it, do not book again. A missing passenger detail returns missing_fields and charges nothing. Without a card the endpoint answers payment_method_required with add_card_url. Full guide and response schema: letsfg.co/for-agents.

⚡ Developer API — server-side search, booking and hotels

A separate product for high-volume commercial integrations; most agents should not use it. Look-to-book search, results in seconds, and real booking through POST /flights/book — plus /discover (20 destinations in one call), async polling, NL query parsing, hotels, and a free sandbox where booking works end to end (same responses, states, questions and timings as production, no money) - build your booking flow there first.

# Register, then search with your API keycurl -X POST https://letsfg.co/developers/api/v1/agents/register \  -H "Content-Type: application/json" \  -d '{"agent_name":"my-agent","email":"[email protected]"}'
curl -X POST https://letsfg.co/developers/api/v1/flights/search \  -H "X-API-Key: letsfg_..." \  -H "Content-Type: application/json" \  -d '{"origin":"LHR","destination":"BCN","date_from":"2026-06-15"}'

Pricing: 200 searches free after every booking, then blocks of 500 for $5.00 ($0.01 each). No booking fee, no transaction fee. Minimum top-up $5. Test for free in the sandbox first, booking included. Full docs: letsfg.co/developers/api/docs.

search_flights  LON → BCN, 2026-04-01, return 2026-04-08get_flight_results  (while more offers are still landing)book_flight     search_id + offer_id + one traveller's real details + contact_email                → booking_ref in seconds; price HELD on the connected cardget_flight_booking  every 20–30 s → completed (PNR, charged_amount) | failed (hold released) | needs_attention

💡 Like what you see? Support us — ⭐ Star · Share with a friend

Works everywhere your agent runs

MCP Server (Claude / ChatGPT / Cursor / Windsurf / OpenClaw)

Use the hosted server. It carries your token for you, and book_flight books for real.

{  "mcpServers": {    "letsfg": {      "url": "https://letsfg.co/mcp"    }  }}

Approve the connection when your client asks; the consent step opens letsfg.co/connect: one tap, no card. The card is asked for at the first booking (0.00 setup, nothing charged). Tools: search_flights, get_flight_results, book_flight, get_flight_booking, plus the hotel tools.

The stdio package (npx -y letsfg-mcp) works too if you give it a token in LETSFG_BEARER_TOKEN; its authenticate tool returns the current connect instructions.

{  "mcpServers": {    "letsfg": {      "command": "npx",      "args": ["-y", "letsfg-mcp"],      "env": {        "LETSFG_API_KEY": "letsfg_your_api_key"      }    }  }}

5-minute quickstarts: Claude · Cursor · Windsurf

Python SDK

from letsfg import LetsFG
bt = LetsFG()  # reads LETSFG_API_KEY from envflights = bt.search("LHR", "JFK", "2026-04-15")print(f"{flights.total_results} offers, cheapest: {flights.cheapest.summary()}")

JavaScript SDK

import { LetsFG } from 'letsfg';
const bt = new LetsFG({ apiKey: 'letsfg_...' });const flights = await bt.search('LHR', 'JFK', '2026-04-15');console.log(`${flights.totalResults} offers`);

Python SDK (cloud search)

from letsfg.local import search_local
# Reads LETSFG_BEARER_TOKEN env var or ~/.letsfg/config.json (the token from the connect flow)result = await search_local("GDN", "BCN", "2026-06-15")
for offer in result.offers[:5]:    print(f"{offer.airlines[0]}: {offer.currency} {offer.price}")

⇄ Split tickets — two tickets, one trip

A long-haul searched as one journey comes back as one through-fare, because everyone is reselling the same ticket. Searched as two independent legs through a hub, each leg is booked from whatever is cheapest for that hop — whichever airline, whichever seller. Usually that lands on two different airlines (often a low-cost carrier for the short leg and a separate airline for the long one), but the only rule is "cheapest for each leg". Nobody sells the combination as one ticket, so nobody quotes it — which is exactly why it is cheaper.

LetsFG builds that itinerary for you and returns it alongside the through-fares. Split offers are flagged, never disguised:

for o in offers:    if o.get("split_ticket") == "true":        print(o["price"], "— two separate tickets, self-transfer not protected")

Read self_transfer before you present the price. unprotected means the two tickets are not linked: if the first flight is late and the connection is missed, the second airline owes nothing — no rebooking, no refund, no duty of care. That is the trade you are being offered in exchange for the saving, and it has to reach the traveller. We only build a split when the connection has a real buffer, and we say so on the offer — but an agent that relays the price without the condition is misrepresenting it.

The probe is gated. Two extra connector fan-outs cost real money, so a split is only attempted when the through-fare is expensive enough, the journey long enough, and the market has somewhere to break the trip. Most searches never fire it, and a search that fires it does not always find a saving.

It lands after completed. See Polling: completed is not the end.

Where it runs. letsfg.co, and the agent lane behind it — the CLI, the Python and JS SDKs, and the MCP server. The paid Developer API is served by a different backend; self_transfer is returned there, but split-ticket offers are not part of that contract.

What it actually saves

_{Measured August 2026 on live searches (one adult, one way, ~2 months out). Each split is two separate tickets (here, two different airlines) with an unprotected self-transfer — if the first flight is late, the second airline owes you nothing. Prices move constantly; these won't reproduce exactly. 5 of 26 long-haul routes searched produced a split cheaper than the best single ticket — the win shows up at secondary cities with no cheap direct long-haul. Regenerate with tools/split-comparison.py.}

The numbers above come from real searches and are reproducible: the script runs the same public search anyone can run, compares the cheapest split against the cheapest single ticket in the same result set, and writes the raw offers to split-comparison.json so any row can be checked. Routes that produced no split are reported too rather than dropped quietly — most searches never fire a split probe, and a table that hid that would misrepresent how often this happens.

✦ Starlink Wi-Fi on results

Offers tell you whether the flight has Starlink, in two honest tiers. A solid verdict (confirmed_all) means the airline has fitted every aircraft of that type. A hedged one (likely_all) means the rollout on that type is real but incomplete — as of August 2026 United was ~29% of its fleet — so it is reported as a signal, never a promise. An absent field means no information, not an absence of Wi-Fi.

for o in offers:    if o.get("starlink") == "confirmed_all":        print(f"{o['owner_airline']} {o['price']} — Starlink on every leg")

Full semantics: docs/api-search.md.

🏨 Hotels — new, and live

Your agent can now book hotels, not just flights. Same credential, same card on file.

Update your SDK before booking hotels. Hotel booking needs letsfg 2026.5.101 or later (Python), letsfg 2026.5.74 or later (JavaScript/TypeScript) or letsfg-mcp 2026.5.77 or later. Earlier releases send the reservation-fee fields retired on 2026-09-11 (expected_balance, no expected_cost), and the API refuses every hotel booking they make. Update with pip install -U letsfg, npm install letsfg@latest or npx -y letsfg-mcp@latest. The hosted MCP at https://letsfg.co/mcp needs no update.

from letsfg import LetsFGlfg = LetsFG()  # reads LETSFG_API_KEY — the SDK's hotel methods take a Developer API key
city = lfg.hotel_destinations("Warsaw")[0]stays = lfg.search_hotels(    city_id=city["Id"], city_name=city["Name"],    check_in="2026-11-10", check_out="2026-11-12", adults=2,)
hotel = stays["hotels"][0]offer = hotel["offers"][0]print(hotel["name"], offer["price"], offer["currency"],      "refundable" if offer["refundable"] else "non-refundable")
booking = lfg.book_hotel_and_wait(    session_id=offer["session_id"],    hotel_code=hotel["hotel_code"],    combination_id_v2=offer["combination_id_v2"],    expected_price=offer["price"],    expected_cost=offer["expected_cost"],    currency=offer["currency"],    fx_rate=offer["fx_rate"],    city_id=city["Id"], city_name=city["Name"],    check_in="2026-11-10", check_out="2026-11-12",    guests=[{"title": "Mr", "first_name": "Jan", "last_name": "Kowalski"},     # one entry per guest:            {"title": "Ms", "first_name": "Anna", "last_name": "Kowalska"}],   # adults=2 -> two names    email="[email protected]", phone="512345678",)print(booking["status"], booking.get("confirmation"), booking.get("total_price"), booking.get("currency"))

How you pay

Held at booking, charged when the hotel confirms. Booking holds the full price on your card — it is not taken. LetsFG books the room and pays the supplier itself, and the hold is captured only once the hotel has confirmed. If the booking fails for any reason (the rate is gone, the price moved, the supplier declined) the hold is released and nothing is charged. There is no reservation fee, no deposit and no pay link.

price is the all-in total, in the currency you searched in (USD by default). A refundable booking cancelled before its free_cancellation_until is refunded in full. The endpoint refuses a cancellation that would cost money; the hotel's own ladder ships in the booking's terms, so you can always see the cost first.

Things worth knowing before you build

• Searching hotels needs no card; booking one does. A hotel search opens a real session at the supplier, so an account with no card on file gets a daily number of hotel searches. Booking asks for the card before anything is held: book_hotel returns a link to add it, as book_flight does. The same card that authorises flight booking authorises hotels — there is no separate hotel signup.
• Every rate type is sold, refundable and non-refundable. Each offer carries refundable and free_cancellation_until; show them to the guest before booking a non-refundable rate.
• Booking is asynchronous. book_hotel returns a booking_job_id, not a booking — the real thing takes minutes. Poll hotel_booking(job_id) until status is succeeded, failed or attention, or call book_hotel_and_wait. attention means a person at LetsFG is confirming the outcome with the supplier: the hold is kept, nothing is charged, and you must not book again.
• Copy the offer back verbatim. Send expected_price, expected_cost, currency and fx_rate exactly as the offer returned them; anything else is refused as price_mismatch before anything is held.
• Name every guest. guests needs one entry per person in the room, children included: adults first, then children in child_ages order. Fewer names than the searched party fails the booking before anything reaches the hotel, and the hold is released.
• Do not re-book while a job is running. Poll it. A retry with the same idempotency_key returns the existing job instead of booking twice.
• The guest hears from us either way. The guest's e-mail gets the confirmation, or a message if the booking fails or needs checking.
• price is what the guest pays. expected_cost is the supplier's own figure, there only to be sent back — never quote it.

JavaScript

import { LetsFG } from 'letsfg';const lfg = new LetsFG({ apiKey: process.env.LETSFG_API_KEY });
const [city] = await lfg.hotelDestinations('Warsaw');const stays = await lfg.searchHotels({  cityId: city.Id, cityName: city.Name,  checkIn: '2026-11-10', checkOut: '2026-11-12', adults: 2,});
const booking = await lfg.bookHotelAndWait({ /* ...offer + guest details... */ });console.log(booking.status, booking.confirmation, booking.total_price, booking.currency);

MCP

Five new tools, in the order you call them: resolve_hotel_city → search_hotels → book_hotel → get_hotel_booking → cancel_hotel_booking.

🖥️ Omarchy desktop plugin

Search every airline in the world from the Omarchy bar. Type two airport codes and a date, press Search, click an offer to open it. The panel lives in this repo — manifest.json, BarWidget.qml, Panel.qml and Model.js at the root — and runs on the same engine as the CLI and the MCP server, ordered by the same open-source ranking algorithm in sdk/js/src/ranking.ts.

[LetsFG Flights panel in the Omarchy bar]

Install

omarchy plugin add https://github.com/LetsFG/LetsFG.git --enable

Then add LetsFG Flights to a bar section in the Omarchy bar settings. The panel reads your LetsFG token from ~/.letsfg/config.json (what letsfg auth writes) and renews it itself, or connects from the panel via letsfg.co/connect — one tap, no card. See OMARCHY-PLUGIN.md.

Remove

omarchy plugin remove io.github.letsfg.flights

That removes the plugin only. Your token is yours — delete ~/.letsfg/config.json yourself if you want it gone.

The plugin bundles no API keys. It authenticates with a token you create and can revoke, it never asks for card details, and it never starts a search on its own — no background poll, no price watch, no refresh timer. Every host it can contact, every file it reads or writes, and the anonymous installation id it sends so we can tell whether anyone is using it, are documented in full in OMARCHY-PLUGIN.md.

Requires the Omarchy Quattro shell. MIT, like the rest of this repo. Not affiliated with, sponsored by, or endorsed by Omarchy or 37signals.

Install

CLI Commands

All commands accept --json for structured output and --api-key to override the env variable.

How it works

CLI / SDK / MCP (free, cloud-backed)

Connect the MCP (once, one tap at letsfg.co/connect) → token → Search (free) → Book (card asked for at the first booking; hold → agent → PNR)

1. Auth — add https://letsfg.co/mcp as an MCP server and approve it. The OAuth consent step opens letsfg.co/connect: one tap, no card. The card is asked for at the first booking, in a 0.00 Revolut setup. Nothing is charged to connect. The SDKs read that token from LETSFG_BEARER_TOKEN or ~/.letsfg/config.json.
2. Search — letsfg search LHR BCN 2026-06-15 calls POST https://letsfg.co/api/search, polls until done (8–10 s to first results), and applies the open-source ranking algorithm locally.
3. Book — POST /api/agent-book holds the price shown on the card and starts a LetsFG booking agent; POST /api/agent-book/status reports completed with the PNR (4–11 minutes), or failed with the hold released. Nothing extra is added at booking.

Polling: completed is not the end

A search returns in 8–10 s to first results. Poll GET /api/results/<search_id> immediately and then every 2 s — a loop that sleeps first puts a floor under a search that is already faster than the sleep.

When status leaves searching, the connector fan-out is done — but the offer set may still be growing. The split-ticket probe is dispatched after the fan-out and merges its result in late, so the cheapest itinerary on the search is routinely one that does not exist yet at the moment the status turns terminal. The response says so:

Keep polling while either is true, and bound the wait — a flag that never clears must not hang your agent. Take whatever has landed when the bound expires.

The Python and JS SDKs and the MCP server already do this, with a 90 s ceiling — the same window the server uses to decide a result has settled. So a search that fires a split probe can take meaningfully longer than the 8–10 s to first results fast path, and it is the split offer you are waiting for. Set LETSFG_WAIT_FOR_SPLIT=0 if you would rather have the fast answer.

Most searches never fire the probe, so both flags are usually already false on the first poll and this costs nothing.

PFS — raw API (same as CLI, without the wrapper)

Connected at letsfg.co/connect -> Bearer token -> POST /api/search -> poll GET /api/results/<id> -> POST /api/agent-book -> poll POST /api/agent-book/status

1. Get a Bearer token — connect through the MCP OAuth flow; the consent step is letsfg.co/connect (one tap, no card; the card or Revolut Pay is asked for at the first booking, 0.00, nothing charged). POST /api/agent-access/request answers 402 with add_card_url and the steps. The MPP wallet lane ($0.01 once) verifies at POST /api/agent-access/verify with Authorization: Payment.
2. Search — POST https://letsfg.co/api/search with Authorization: Bearer <token>. Returns { search_id }. Poll GET /api/results/<search_id> immediately, then every 2 s, until status leaves searching. Then keep polling while split_ticket_pending or gf_enrich_pending is true — the split-ticket offer merges in after the status turns terminal.
3. Book — POST /api/agent-book → booking_ref; poll POST /api/agent-book/status until completed (PNR) or failed (hold released, nothing charged).

Developer API — server-side search and booking

Register → Connect a Revolut method → Search (200 free per booking) → POST /flights/book → poll to a PNR

1. Discover — POST /flights/discover with up to 20 destinations, get indicative prices sorted cheapest-first. 1 credit, 2–5 s. Use to rank options before committing to a full search.
2. Full search — POST /flights/search (blocking) or /flights/search/async (non-blocking + poll). 1 credit, 8–10 s to first results.
3. Book — each offer includes a direct airline booking_url. No LetsFG fee, no checkout step.

Architecture

CLI / SDK / MCP / PFS

CLI / SDK / MCP / AI Agent        │  Connected at letsfg.co/connect (one tap) -> Bearer token        ▼POST letsfg.co/api/search  (bot-protected, token required)        │        ▼letsfg.co server-side search engine        │        ▼GET /api/results/<search_id>  (poll every 2 s; keep going while split_ticket_pending)        │        ▼Ranking applied locally (sdk/js/src/ranking.ts, open-source)        │        ▼Results + booking via POST /api/agent-book (hold on card -> LetsFG agent -> PNR)

Developer API

Product / Team / Agent        │  API key + a connected Revolut method        ▼letsfg.co/developers/api/v1  ├─ /flights/discover      (indicative prices, 20 dest, 2–5 s)  ├─ /flights/search        (full search, 8–10 s to first results)  ├─ /flights/search/async  (non-blocking + poll)  ├─ /flights/parse-query   (Gemini NL parsing, free)  ├─ /flights/book          (holds the fare on the connected method)  ├─ /flights/bookings/{id} (poll to a real PNR, 4–11 min)  └─ /sandbox/flights/*     (free: search + simulated booking, same schema)        │        ▼Real airline PNR - the hold is captured only once it exists

Star History