Easyeda Pro Mcp

io.github.VLab-Software由 GitHub 帳號 VLab-Software 發布v1.0.2更新於 Nov 3, 2026

MCP server and EasyEDA Pro extension bridge for live project assistance.

已驗證STDIO僅桌面檔案與儲存開發者工具

概覽

AI 產生的概覽

把 AI 助理連接到本機已開啟的 EasyEDA Pro 專案,用於原理圖與 PCB 的檢查、驗證、DRC 規則管理與匯出。

可以做什麼
  • 檢查橋接健康狀態、即時狀態、目前情境與選取物件
  • 檢查與搜尋原理圖:快照、元件、腳位、網路與元件庫
  • 追蹤網路與元件、找出未連接腳位並執行電路斷言驗證
  • 檢視 PCB 佈局:執行 DRC、列出層與元件、查看佈線狀態、標示網路、讀取並準備 DRC 規則修改
  • 導覽至元件或區域、縮放板面,並匯出 CPL、BOM、網表、Gerber 與 PDF
  • 執行經確認的動作,例如儲存、匯入變更、自動佈線、自動佈局與修改 DRC 規則
適用情境
適合在不需截圖或手動匯出的情況下,讓助理檢視已開啟的 EasyEDA Pro 原理圖或 PCB:追蹤網路、檢查上拉下拉、去耦或 USB-C CC 路徑、讀取設計規則,或產出生產檔案。
執行需求
以 stdio 在本機執行,需要 Node.js 20 或更新版本、EasyEDA Pro 2.3.0 或更新版本並安裝橋接擴充且允許外部互動,以及支援 MCP 的用戶端。選用環境變數 EASYEDA_MCP_WS_HOST 與 EASYEDA_MCP_WS_PORT 預設分別為 127.0.0.1 與 8765。
安裝前請注意
檢查作業為唯讀,但經確認的動作可儲存、匯入變更、自動佈線、自動佈局與修改 DRC 規則,會改動目前開啟的專案,需人工明確確認。setup 指令會改寫偵測到的 AI 用戶端設定檔,匯出作業會寫出 Gerber、BOM、PDF 等檔案。

安裝

在 SourceWeft 中

  1. 開啟 儀表板中的 Easyeda Pro Mcp,將其新增到工作區。
  2. 為需要使用其工具的對話啟用該服務。

Desktop only,透過 STDIO。 STDIO 服務會啟動本機處理程序,因此需要 SourceWeft 桌面主機。

其他 MCP 客戶端

參照 儲存庫 中的啟動說明。

README

[EasyEDA Pro MCP]

EasyEDA Pro MCP

Connect Claude, Codex, Cursor, VS Code, Antigravity, and other Model Context Protocol (MCP) clients to the live EasyEDA Pro project already open on your machine.

Independent open-source MCP bridge for live schematic and PCB workflows in EasyEDA Pro.

[CI] [npm] [Release] [License] [Node] [Platforms] [Sponsor]

[Install in Cursor] [Install in VS Code] [Claude Desktop .mcpb] [EasyEDA Extension .eext]

Quick Start · AI Client Setup · Tools · Troubleshooting · Releases

[Demo showing EasyEDA Pro with the MCP Bridge workflow in action]

Key Features

  • Live schematic & PCB introspection — Give AI agents structured access to your open EasyEDA Pro project without screenshots or manual exports.
  • Circuit tracing & verification — Trace nets and component pins, find unconnected pins, and run programmatic assertions (pull-ups/downs, decoupling capacitors, USB-C 5.1k CC paths).
  • Native PCB DRC rule management — Read active design rules, saved profiles, and net/region tables, preview changes safely, and apply confirmed rule updates with readback verification.
  • Editor navigation & fabrication exports — Focus components or regions directly in EasyEDA Pro and export BOM, Netlist, Gerber, and PDF files.
  • Local & read-first by default — Runs locally over stdio and ws://127.0.0.1:8765. Inspection is read-only; mutating actions require explicit human confirmation.

Requirements

  • Node.js 20 or newer
  • EasyEDA Pro 2.3.0 or newer
  • An MCP-compatible AI client (Claude Code, Codex, Claude Desktop, Cursor, VS Code, Antigravity, Windsurf, etc.)

Getting Started

EasyEDA Pro MCP has two local parts: the EasyEDA Pro Extension (.eext) inside the editor and the MCP Server (@vlabsoftware/easyeda-pro-mcp) launched by your AI client.

1. Automatic Setup (Fastest — No Git Clone)

Run one command in your terminal:

bash
npx -y @vlabsoftware/easyeda-pro-mcp setup

This automatically detects and configures installed AI clients (Claude Desktop, Cursor, VS Code, Antigravity, Windsurf, Claude Code, Codex) with platform-safe commands and exports easyeda_mcp_bridge.eext to your ~/Downloads folder (or current directory).

Building from source instead?
bash
git clone https://github.com/VLab-Software/easyeda_mcp.gitcd easyeda_mcpnpm installnpm run setup:localnpm run setup:clients   # Optional: points detected AI clients to this local build

This builds dist/index.js, build/dist/easyeda_mcp_bridge.eext, and build/dist/easyeda-pro-mcp.mcpb.

2. Install the EasyEDA Pro Extension

  1. In EasyEDA Pro, open Extensions Manager and import the exported easyeda_mcp_bridge.eext (or download easyeda_mcp_bridge.eext from Releases).
  2. Enable Allow interactive with external for EasyEDA MCP Bridge.
  3. Open your schematic or PCB project (if needed, click MCP Bridge -> Reconnect in the top toolbar).

3. Or Add the MCP Server Manually / 1-Click

If you skipped npx -y @vlabsoftware/easyeda-pro-mcp setup, use a 1-click badge above or add the standard npx config below:

json
{  "mcpServers": {    "easyeda-pro": {      "command": "npx",      "args": ["-y", "@vlabsoftware/easyeda-pro-mcp"]    }  }}

Windows JSON note: In GUI clients on Windows, use "command": "cmd", "args": ["/c", "npx", "-y", "@vlabsoftware/easyeda-pro-mcp"] so npx.cmd spawns cleanly.

Claude Code

Run in your terminal:

bash
claude mcp add --scope user easyeda-pro -- npx -y @vlabsoftware/easyeda-pro-mcp
Codex

Run in your terminal:

bash
codex mcp add easyeda-pro -- npx -y @vlabsoftware/easyeda-pro-mcp
Claude Desktop
  • 1-Click Bundle: Download easyeda-pro-mcp.mcpb and double-click it to install in Claude Desktop.
  • Manual JSON: Or add the standard config above to claude_desktop_config.json, then fully quit and reopen Claude Desktop:
    • macOS: ~/Library/Application Support/Claude/claude_desktop_config.json
    • Windows: %APPDATA%\Claude\claude_desktop_config.json (use "command": "cmd", "args": ["/c", "npx", "-y", "@vlabsoftware/easyeda-pro-mcp"])
Cursor

Click Install in Cursor, or add the standard config above to ~/.cursor/mcp.json (global) or .cursor/mcp.json (project) and refresh servers in Cursor Settings -> MCP.

VS Code (GitHub Copilot)

Click Install in VS Code, or add to .vscode/mcp.json (or Command Palette -> MCP: Open User Configuration) and open Copilot Chat (Agent mode):

json
{  "servers": {    "easyeda-pro": {      "type": "stdio",      "command": "npx",      "args": ["-y", "@vlabsoftware/easyeda-pro-mcp"]    }  }}
Antigravity & Windsurf
  • Antigravity: Run npx -y @vlabsoftware/easyeda-pro-mcp setup --client antigravity (or add the standard config to ~/.gemini/config/mcp_config.json), then click Refresh in Additional Options (...) -> MCP Servers.
  • Windsurf: Run npx -y @vlabsoftware/easyeda-pro-mcp setup --client windsurf (or add the standard config to ~/.codeium/windsurf/mcp_config.json), then refresh MCP servers in Cascade settings.

Your First Prompts

Verify that the bridge is connected and sees your open document:

text
Run easyeda_doctor and check whether the EasyEDA Pro bridge is healthy.

Once connected, try real hardware engineering workflows:

text
Inspect the open schematic with easyeda_schematic_snapshot and list any unconnected pins.
text
Verify USB1 with easyeda_verify_connections: check that CC1 and CC2 each have a 5.1k resistor to GND and VBUS is decoupled to GND.
text
Read the active PCB design rules with easyeda_get_drc_rules and summarize track width, via size, and clearance limits.

More examples: Practical Workflows


Available Tools (32)

CategoryTools
Status & Contexteasyeda_doctor · easyeda_live_status · easyeda_get_context · easyeda_get_selection
Schematic Inspection & Searcheasyeda_schematic_snapshot · easyeda_list_schematic_components · easyeda_get_component_pins · easyeda_find_component · easyeda_find_net · easyeda_search_library
Circuit Tracing & Verificationeasyeda_trace_net · easyeda_trace_component · easyeda_find_unconnected_pins · easyeda_validate_schematic_area · easyeda_verify_connections
PCB Layout & DRC Ruleseasyeda_run_drc · easyeda_get_pcb_layers · easyeda_get_routing_status · easyeda_list_pcb_components · easyeda_highlight_net · easyeda_get_drc_rules · easyeda_prepare_drc_edit · easyeda_get_drc_edit_result
Navigation & Exportseasyeda_navigate_component · easyeda_navigate_region · easyeda_zoom_board · easyeda_export_cpl · easyeda_export_bom · easyeda_export_netlist · easyeda_export_gerber · easyeda_export_pdf
Confirmed Actionseasyeda_confirmed_action (save, importChanges, autoroute, autolayout, editDrcRules)

Full parameter schemas and examples: Tools Reference · DRC Rule Editing


Documentation

GuideWhen to use
Quick StartShortest path from zero to a working bridge
AI Client SetupDetailed setup for Claude Code, Codex, Claude Desktop, Cursor, VS Code, Antigravity & others
Practical WorkflowsCopy-pasteable prompts for schematic review, circuit assertions, DRC, and exports
Upgrading & CompatibilityServer/Extension version matrix and 3-step upgrade checklist
TroubleshootingCommon fixes and bridge error code reference
Architecture & Safety ModelHow the local WebSocket bridge and confirmation gates work
Changelog & ReleasesVersion history and prebuilt .eext / .mcpb downloads
Development & Local Testing
bash
npm run setup:local          # Build MCP server, extension bundle, .eext, and .mcpb packagesnpm run setup:clients        # Point detected AI clients to this local checkout (--local)npm test                     # Run Vitest unit suitenpm run typecheck            # Typecheck MCP servernpm run typecheck:extension  # Typecheck EasyEDA Pro extensionnpm run test:smoke:drc       # End-to-end stdio + WebSocket DRC smoke testnpm run docs:build           # Build VitePress documentation site

Security, Disclaimer & License

  • Localhost & Live Session: Operates on the live project open in EasyEDA Pro over 127.0.0.1:8765 (no offline .epro parsing or commercial/order automation). Do not expose the WebSocket port to untrusted networks — see SECURITY.md.
  • Non-Affiliation: Independent open-source project. Not affiliated with, endorsed by, or sponsored by EasyEDA, JLCPCB, or Shenzhen Jia Chuang Ban Technology Co., Ltd. EasyEDA and EasyEDA Pro are trademarks of their respective owners.
  • Sponsorship & Support: If you find this project useful, consider supporting its development via GitHub Sponsors.
  • Contact & License: [email protected] · Released under the MIT License.

來源:README.md,提交 bf8a1e7

工具

0
SourceWeft 尚未在沙箱中啟動過該軟體包,因此其工具未知。

版本歷史

1
  1. v1.0.2最新Sep 16, 2026

評分

已滿足適用檢查項的 50%

該評分衡量此收錄條目的完整程度,依據註冊中心條目、端點與公開來源計算得出。它不是對伺服器本身的評價,也不表示伺服器安全或目前可用:可連通性是帶日期的檢查結果,評分也不包含安裝量或使用者評價。

  • 近 30 天內可連通25 分

    請保持端點能夠回應 MCP 握手;SourceWeft 每 30 天探測一次。

  • 已宣告認證方式10 分

    請在註冊中心條目中宣告憑證請求標頭,或保持端點能夠回應探測,以便判定其認證方式。

  • 已列出工具15 分

    請讓伺服器在無憑證時回應 tools/list,或發布可在沙箱中無憑證啟動的軟體包。

  • 描述必需15 分
  • 圖示10 分
  • 文件15 分
  • 授權條款10 分