Robin: AI-Powered Dark Web OSINT

[Demo]

Architecture

[Workflow]

Features

• 🤖 Multi-Model Support – OpenAI, Claude, Gemini, Mistral, OpenRouter, Ollama, or any OpenAI-compatible API (LM Studio, llama.cpp, Groq, etc.).
• 🌐 Web UI – Streamlit-based interface for interactive investigations.
• 🔌 MCP Support – Run Robin from any MCP-capable agent, using that agent's own model. See Robin as MCP.
• 💬 Conversational Follow-ups – Ask grounded follow-up questions about an investigation without re-running the search, answered from that investigation's own data.
• 🔀 One-Click Pivots – Suggested follow-up queries surfaced from the findings; click one to launch a fresh investigation.
• 🐳 Docker-Ready – Recommended Docker deployment for clean, isolated usage.

⚠️ Disclaimer

This tool is intended for educational and lawful investigative purposes only. Accessing or interacting with certain dark web content may be illegal depending on your jurisdiction. The author is not responsible for any misuse of this tool or the data gathered using it.

Use responsibly and at your own risk. Ensure you comply with all relevant laws and institutional policies before conducting OSINT investigations.

Additionally, Robin leverages third-party APIs (including LLMs). Be cautious when sending potentially sensitive queries, and review the terms of service for any API or model provider you use.

Installation

[!NOTE] The tool needs Tor to do the searches. You can install Tor using apt install tor on Linux/Windows(WSL) or brew install tor on Mac. Once installed, confirm if Tor is running in the background.

[!TIP] Provide your API key either in a .env file (copy .env.example) or as environment variables. One key is enough: Robin lists models for whichever providers it finds. Supported keys are OPENAI_API_KEY, ANTHROPIC_API_KEY, GOOGLE_API_KEY, MISTRAL_API_KEY and OPENROUTER_API_KEY.

For Ollama, nothing goes in your .env. Robin defaults to http://host.docker.internal:11434, which is what the recommended Docker install needs. Two things are still on you:

1. Run the container with --add-host=host.docker.internal:host-gateway (the README command already does).
2. Make Ollama listen on all interfaces, since it binds to 127.0.0.1 by default and a container cannot reach that. If you start it yourself, OLLAMA_HOST=0.0.0.0 ollama serve &. If it runs under systemd, sudo systemctl edit ollama.service, add [Service] and Environment="OLLAMA_HOST=0.0.0.0", then sudo systemctl daemon-reload && sudo systemctl restart ollama.

See TROUBLESHOOTING.md if it still doesn't appear.

For any other OpenAI-compatible provider (LM Studio, llama.cpp, Groq, etc.), use the 🔌 Custom API Provider expander in the sidebar — no .env changes required. Enter the base URL, an optional API key, and optionally a model name if the provider doesn't expose /v1/models for auto-discovery.

Docker [Recommended]

• Pull the latest Robin docker image

docker pull apurvsg/robin:latest

• Create a .env file in the folder you run from, with your API key in it (see .env.example). Create it before the first run: if it does not exist, Docker mounts an empty folder in its place and Robin starts with no keys.

touch .env   # then add your API key to it

• Run the docker image as:

docker run --rm \   -v "$(pwd)/.env:/app/.env" \   --add-host=host.docker.internal:host-gateway \   -p 8501:8501 \   apurvsg/robin:latest

[!TIP] To persist saved investigations across Docker restarts, mount a named volume or a local directory at /app/investigations.

A named volume works the same on every OS and needs no host path. It is also the volume the agent commands in Robin as MCP mount, so the UI shows the same reports your agent saved:

bash

docker run --rm \   -v "$(pwd)/.env:/app/.env" \   -v robin-investigations:/app/investigations \   --add-host=host.docker.internal:host-gateway \   -p 8501:8501 \   apurvsg/robin:latest

Or mount a local directory, if you want the JSON files on your own disk:

bash

docker run --rm \   -v "$(pwd)/.env:/app/.env" \   -v "$(pwd)/investigations:/app/investigations" \   --add-host=host.docker.internal:host-gateway \   -p 8501:8501 \   apurvsg/robin:latest

Investigations are saved to the investigations/ folder in your working directory and can be loaded from the Past Investigations panel in the sidebar.

Create the folder yourself first (mkdir -p investigations) so Docker does not create it as root. The container runs as UID 1000, and on Linux a folder owned by anyone else is read-only to it — Robin prints one warning and the save fails, though the investigation still runs. If you hit that, or your own UID isn't 1000, use the named volume above, or see Saved investigations fail with permission denied on Linux.

• Open your browser and navigate to http://localhost:8501

Build it yourself

To run your own build instead of the published image, clone the repository and build it:

docker build -t robin .

Then use the same run commands with robin in place of apurvsg/robin:latest:

docker run --rm \   -v "$(pwd)/.env:/app/.env" \   --add-host=host.docker.internal:host-gateway \   -p 8501:8501 \   robin

docker run --rm \   -v "$(pwd)/.env:/app/.env" \   -v "$(pwd)/investigations:/app/investigations" \   --add-host=host.docker.internal:host-gateway \   -p 8501:8501 \   robin

• Open your browser and navigate to http://localhost:8501

Robin as MCP

Any LLM service that speaks MCP can run it, using its own model. The sections below are worked examples for the common hosts; a host that is not listed works the same way, with whatever wording it uses for "add an MCP server".

Claude Code

claude mcp add robin -- docker run -i --rm -v robin-investigations:/app/investigations apurvsg/robin mcp

Or check it into the project in .mcp.json. A Tor investigation takes minutes, so raise the per-server timeout:

{  "mcpServers": {    "robin": {      "command": "docker",      "args": ["run", "-i", "--rm", "-v", "robin-investigations:/app/investigations", "apurvsg/robin", "mcp"],      "timeout": 600000    }  }}

Codex

codex mcp add robin -- docker run -i --rm -v robin-investigations:/app/investigations apurvsg/robin mcp

The ChatGPT desktop app shares this host: adding Robin under Settings → MCP servers there writes the same configuration, and its tools appear in Codex sessions rather than in an ordinary ChatGPT chat.

A Tor search usually takes a couple of minutes, which can outlast Codex's default MCP tool timeout, so raise the limits in ~/.codex/config.toml:

[mcp_servers.robin]command = "docker"args = ["run", "-i", "--rm", "-v", "robin-investigations:/app/investigations", "apurvsg/robin", "mcp"]tool_timeout_sec = 600startup_timeout_sec = 60
# Only for non-interactive runs (`codex exec`): Codex declines MCP tool calls# that would need approval, so pre-approve Robin's read-only tools.default_tools_approval_mode = "approve"

Pull the image first (docker pull apurvsg/robin:latest) so the first start is not also a download.

Claude Desktop

Add this to claude_desktop_config.json and restart the app:

{  "mcpServers": {    "robin": {      "command": "docker",      "args": ["run", "-i", "--rm", "-v", "robin-investigations:/app/investigations", "apurvsg/robin", "mcp"]    }  }}

Hermes

In ~/.hermes/config.yaml:

mcp_servers:  robin:    command: docker    args: [run, -i, --rm, -v, "robin-investigations:/app/investigations", apurvsg/robin, mcp]    timeout: 600

OpenClaw

openclaw mcp add robin --command docker --arg run --arg -i --arg --rm --arg -v --arg robin-investigations:/app/investigations --arg apurvsg/robin --arg mcp

Or in the config, under mcp.servers:

{  "mcp": {    "servers": {      "robin": {        "transport": "stdio",        "command": "docker",        "args": ["run", "-i", "--rm", "-v", "robin-investigations:/app/investigations", "apurvsg/robin", "mcp"],        "requestTimeoutMs": 600000      }    }  }}

ChatGPT

The desktop app's Settings → MCP servers configures the Codex host that the app, the Codex CLI and the IDE extension share, so add Robin there and it appears in Codex sessions: see Codex. An ordinary ChatGPT chat cannot run it, because chat reaches MCP servers through connectors that run in OpenAI's infrastructure rather than on your machine.

Security

• Nothing sends, executes, or runs a shell. The only writes are saved reports, into investigations/ under a filename Robin picks; the agent never names a path.
• Searches, page scrapes and search-engine health checks go through Tor, so the app you are using never fetches a dark web page itself. Model provider calls and the model list refresh go directly, not through Tor.
• Scraped text comes back inside untrusted-data delimiters, with control, zero-width and bidi characters stripped first, so your model reads it as evidence rather than as instructions.

Acknowledgements

• Idea inspiration from Thomas Roccia and his demo of Perplexity of the Dark Web.
• Tools inspiration from my OSINT Tools for the Dark Web repository.
• LLM Prompt inspiration from OSINT-Assistant repository.
• Logo Design by my friend Tanishq Rupaal