Usb Rea

usb-rea: Reverse Engineer any USB gadget

[ci] [license] [usb-rea MCP server]

[Support my open-source work: get a SkinToScan pack]
_{If you find this useful, you can support me by getting a SkinToScan pack, my other project. It's a one-time purchase that directly funds my open-source work.}

[Buy Single Picture Check, €4.49] [Buy 5 Picture Pack, €19.99 (popular)] [Buy 15 Picture Pack, €54.99]

Concrete result: from captures of the NZXT Kraken X (1e71:170e) fan command, usb-rea recovers 02 4d <channel> 00 <duty> byte for byte, exactly as liquidctl's kraken2.py sends it, and the generated driver emits identical packets for duty values it never saw. Same for the SteelSeries Rival 100 (1038:1702) DPI, polling and RGB tables from rivalcfg. Proof runs in CI: docs/VALIDATION.md. Full walk-through with a CRC8 and a rolling counter: Corsair Hydro Platinum case study. Real Windows USBPcap of an ASUS TUF Gaming LC III LCD: case study.

Have a Windows-only device? Open a device request with a capture and I will run it and publish the result.

[usb-rea demo: capture labelled clicks, get the protocol and a working driver]

Got a USB device that only ships a Windows vendor app (case LCD, RGB controller, mouse, "smart" lamp)? Click around in the vendor app while usb-rea captures the USB traffic (usbmon on Linux, USBPcap on Windows), diffs the packets per action, infers the protocol, and writes an open-source Python/libusb driver, with every conclusion linked to the exact packets that prove it.

Status: alpha (v0.7.11, on PyPI). Validated on synthetic devices, on protocols documented by liquidctl and rivalcfg, on public Wireshark captures (see docs/VALIDATION.md) and on a real AIO cooler LCD capture a user shared, where it found the same brightness command and image stream format the user had worked out by hand. Your captures are welcome.

Try it in 10 seconds (no hardware needed)

pip install usb-reausb-rea demo --device fan

mode         100%  0x5a | counter (+1 per message) | 0x30 | lookup 1→0x11, 2→0x22, 3→0x47 | 0x00 | 0x00 | u16le crc16_modbus(bytes[0:6])fan          100%  0x5a | counter (+1 per message) | 0x10 | u16be round(value * 1 + 0) | 0x00 | u16le crc16_modbus(bytes[0:6])color        100%  0x5a | counter (+1 per message) | 0x20 | round(value * 1 + 0) | round(value[1] * 1 + 0) | round(value[2] * 1 + 0) | u16le crc16_modbus(bytes[0:6])  color only sent while mode 3 (3x; other commands ran in mode 1, 2): the driver sets it first
handshake (3 messages sent once when the app opens the device):  1. 5a 00 01 00 00 00 0d 1d -> a5 01 ?? ?? ?? ?? ??, sent again 2x later (session reopened)  2. 5a 00 02 38 b4 e6 52 1e 1e -> a5 02 ?? ??, bytes 3-6 = token from step 1, sent again 2x later (session reopened)     reply byte 2 = 01 (2x, most common): the steps below     reply byte 2 = 02 (1x): 5a 00 04 01 00 00 5c 11 -> a5 04 01 ??, 5a 00 03 01 00 00 5d 65 -> a5 03 01 ??  3. 5a 00 03 01 00 00 5d 65 -> a5 03 01 ??, sent again 1x later (session reopened)
device replies:mode         6/6  0xa5 | = query byte 2 (0x30) | = query byte 1 | = query byte 3 | 0x00 | sum8(bytes[0:5])fan          6/6  0xa5 | = query byte 2 (0x10) | = query byte 1 | u16le round(value * 1 + 0) | sum8(bytes[0:5])color        6/6  0xa5 | = query byte 2 (0x20) | = query byte 1 | 0x00 | 0x00 | sum8(bytes[0:5])poll 1       7/7  0xa5 | = query byte 2 (0x40) | u16le rpm = raw, seen 800..4011 | u8 temp = raw, seen 35..38 | mode: 0x11 = silent, 0x22 = balanced, 0x47 = turbo | sum8(bytes[0:6])
24 of 24 'seen' observations matched a reply byte (mode, rpm, temp)

It writes a synthetic capture of a fan controller (its vendor app first opens a session with a token the fan hands out, then polls the fan's status, and the markers note what the app's screen showed, seen rpm 1207 temp 37 mode silent), recovers the protocol and the replies, names the readings and the fan's mode, notices that the app only sets a color in mode 3, and writes report.md (every claim linked to Wireshark frame numbers) and a working pyusb driver that encodes values it never saw and decodes what the fan answers.

--device lamp (default) is a simple 8-bit device; --device lcd is a pump cap screen whose app streams a JPEG video while you change the brightness; --device dial shows 32-bit values and packed bitfields:

position     100%  0xa5 | 0x01 | u32le round(value * 1 + 0) | sum8(bytes[0:6])level        100%  0xa5 | 0x02 | bits[0:4] = round(value * 1 + 0) | 0x00 | sum8(bytes[0:4])

What it can infer

Linear fits must survive leave-one-out cross-checks; otherwise usb-rea falls back to an honest lookup table and says so.

Real device workflow (Linux)

sudo modprobe usbmonusb-rea capture start -o lamp.pcapngusb-rea mark -m lamp.pcapng.actions.json "brightness 0%"    # then click it in the vendor appusb-rea mark -m lamp.pcapng.actions.json "brightness 50%"   # ...repeat for 3+ values per settingusb-rea capture stopusb-rea report lamp.pcapng -o report.mdusb-rea scaffold lamp.pcapng -o lamp_driver.pyusb-rea dissector lamp.pcapng -o lamp.lua      # Wireshark dissector for the same protocol

Captured on Windows with USBPcap/Wireshark and no markers? Click each action with a short pause in between, then just list them in order, and usb-rea splits the traffic at the pauses:

usb-rea report lamp.pcapng --labels "brightness 0%; brightness 50%; brightness 100%; power off; power on"usb-rea scaffold lamp.pcapng --labels labels.txt -o lamp_driver.py   # one label per line

(Markers, if you have them, are a JSON list of {"label", "start", "end"} epoch timestamps.)

Most vendor apps also poll the device on their own (a "get status" every few hundred ms, keep-alives). usb-rea spots identical host→device messages sent on a steady rhythm, away from your clicks, and sets them aside before splitting and diffing; the report lists them under Background traffic (ignored) with their period and frame numbers. A constant "apply" packet that always follows a real command is not treated as background. Polls that carry a sequence number are caught too: same-shape messages that differ only in a byte counting up by one (plus a trailing checksum that changes with it) show up as e.g. aa 10 ?? 00 ??. Those need at least 8 copies, so a user stepping a value by one is not mistaken for a poll.

Device responses

Devices answer too: an ACK after each command, a status reply to every poll (RPM, temperature, firmware version), or the data of a GET_REPORT. usb-rea pairs each query with the IN transfer that follows it (by endpoint and typical delay, so a poll sent in the middle of a click doesn't steal the click's reply) and decodes the replies with the same machinery: constants, bytes that echo the query (command id, sequence number), counters, checksums, and values fitted to your labels (fan 1200 → u16le in the reply). Anything else that varies is reported as a reading with its observed range, and the report says that its meaning is unknown. A 16-bit reading is only claimed when one byte order changes smoothly and the other jumps. The generated driver gets query_<name>() methods that send the query, read the reply and return a dict ({"reading_2": 1834, "checksum_ok": True, …}). Try it with usb-rea demo --device fan or on a capture with polls.

Naming readings: tell it what the vendor app shows

A reading is just bytes until you say what it is. While capturing, note what the vendor app displays now and then:

usb-rea mark -m fan.pcapng.actions.json "seen rpm 1180 temp 34"   # several name/value pairs are fine

A seen marker is an observation, not an action: it does not end the action in progress, is never diffed, and never becomes a command. Each observation is compared with the reply just before it (what the app was showing) or just after it, within 1 s. A reading takes the name when it equals every observation of that name (2+ observations, within one unit or 1%), or when a linear raw = value * scale + bias fits them exactly and survives the same leave-one-out check as commands (3+ observations with distinct values). Two neighbouring byte readings are also tried as one 16-bit LE/BE number, and four as one 32-bit LE/BE number (three are enough when the high byte is still 0x00), so energy counters and uptimes work: mark "seen energy 2.968" names bytes 1-4 u32be energy = raw / 1000. The report shows the formula with the frames and marker times behind it, and lists observations that matched nothing; the driver returns {"rpm": 1180, "temp": 34, "ok": True, …}.

On/off states work too: mark "seen pump on, alarm off" (also true/false, yes/no). A name seen both on and off becomes a status flag, the one bit of a reply byte that is 1 every time the app said on and 0 every time it said off; several flags can share a byte, and the driver returns {"pump": True, "alarm": False, …}. Two bits that always flip together are left unnamed, and bits of a flag byte that change but were never named are pointed out in the report.

Modes and other enum values are words: mark "seen mode silent", mark "seen profile gaming" (a word value goes last, or before a comma: seen mode turbo, rpm 3900). A name seen as 2+ different words in 3+ observations becomes a mode: the reply byte whose raw value is the same every time the app showed one word and different between words. If other bits of that byte change on their own (or it holds named flags), only the bits that differ between the words are taken, e.g. bits[4:6] profile. The report lists the map (mode: 0x00 = silent, 0x02 = turbo) with its evidence, JSON/MCP fields get it as table, and the driver returns the word, or the raw number for a value never seen: {"mode": "turbo", …}. When the app shows a negative number (seen temp -5), 8- and 16-bit readings whose top bit gets set are also tried as signed (i8, i16le/i16be). A small number that no whole byte matches (seen battery 3 for battery bars) is also looked for in part of a byte: the free bits beside named flags or modes (trimmed to the bits that change, so fixed reserved bits are skipped) or either nibble, e.g. bits[1:4] battery; the driver returns the number. A value shown with decimals (seen temp 41.5) is also tried as tenths, hundredths or thousandths (raw 415, scale 10), so two such markers are enough instead of the three a free linear fit needs. Numbers can be typed the way the app prints them, with a decimal comma or a thousands separator: seen temp 41,5 °C, rpm 1,180 reads as 41.5 and 1180.

Limits: only replies (not commands) are named, a name that fits two places is left out, modes are one byte (or one contiguous bit group in it) and only the words you saw get a label, 32-bit readings are never signed, multi-bit numeric readings packed beside other bits are not tried, and display rounding coarser than one unit (e.g. RPM shown in steps of 10) only works for the identity, not for a scaled fit. seen labels in --labels mode have no timestamp and are skipped.

Handshakes: what the app sends when it opens the device

Many devices want a few messages before they accept commands: a hello, an unlock or auth step, a "start" or "PC control on". usb-rea treats host→device messages (and class/vendor control reads) captured before your first action marker as a handshake when they are not background polls and are never sent again later in the capture, so start capturing before you open the vendor app. Each step is paired with the reply that follows it, and the report gets a Handshake section with the frames. A run of 3+ reply bytes that comes back in a later handshake request, or at the same offset in every captured copy of a command, is a session token or device id; a run of 3+ request bytes that the reply repeats is an echo. A checksum is claimed when one algorithm fits the end of every handshake request (or every reply). The generated driver replays the handshake in Device.open() (called by Device(); Device(handshake=False) skips it) before any command: tokens are copied from this session's live replies into later steps and into commands, request checksums are recomputed, and each reply is checked against the captured one (?? for token and checksum bytes, checksums verified), raising RuntimeError on a mismatch. JSON/MCP output has it as handshake.

Retries are recognised: when the app sends the same message again straight away because the first copy got no reply or a different one (a device that answers "busy" until it is ready), the copies are one step with the earlier ones listed under retries. The driver then resends that step up to as many times as the app did when the reply times out or does not match.

Reopens are recognised too: when the app sends the whole handshake again later in the capture (the device slept or was replugged, or the app reconnected), with each message on the same channel and length and only the checksum or bytes copied from that block's own replies (a new session token) changed, the block is session setup, not part of an action. It is kept out of the actions, the steps list it under reopens, and the report says so.

Branches on the device's reply are recognised as well: when a later block follows the handshake up to some step and then sends other messages, and the reply to that step differs from the first session's at a byte that is not a session token or checksum (a status such as "ready" or "needs calibration", or a mode), that step gets branches: the reply byte's offset, each value seen there with how often and the steps the app sent next (the rest of the handshake for the first session's value, the other messages up to the next action marker for the others), and the most common value as default. The byte becomes ?? in Expected, the branch messages are kept out of the actions, and the report and usb-rea demo --device fan list the branches (the synthetic fan's app sends a calibrate step when auth answers "needs calibration", make_capture(..., handshake=True, branch=True)). The driver's open() reads that byte of the live reply and replays the matching branch, falling back to the most common one for a value the capture never showed; Device.branches records the values taken.

Limits: every handshake message is seen once, so a byte that changes per session but is never reused (a random nonce the device only reports) looks fixed; open(check=False) replays without checking. Branching is learned from one capture only (the first session and its reopens, so capture the app reconnecting in the states you care about), with one branch point per handshake decided by one reply byte; branches that join again are stored as separate tails, and a branch block must sit between actions (not inside a marker). Otherwise a later handshake must repeat the whole sequence to count as a reopen (a partial one, e.g. after a mode switch, is not recognised), and a token must be copied verbatim (a token that is transformed, such as a challenge answered with a hash, is not recognised). With --labels (no timestamps) the handshake is part of the first action, so use markers for this.

States: commands the app only sends in one mode

Some devices only accept a command in one mode (a color only in "custom" lighting mode, a curve only in manual fan mode), so the vendor app switches the mode first. usb-rea walks the actions in capture order and tracks the value last chosen by each state command (a command with one argument that is a lookup table, like mode 1/2/3, or an on/off label). A command gets requires (state, value, how often, the other values seen, evidence frames) when it was sent at least twice, every time after the state command chose the same value, while the capture also shows other commands used in a different value of that state. The report adds an "Only sent while mode 3" line, the CLI demo and the MCP diff_actions output list it under states, and the generated driver remembers what it set: set_color() first calls set_mode(3) unless the driver already set mode 3 since open(), and Device(auto_state=False) raises StateError instead. The synthetic fan's app only sets a color in mode 3 (make_capture(..., device="fan", states=True), used by usb-rea demo --device fan).

Limits: this is what the app did, not proof that the device refuses the command in other modes; capture the command in every mode you can to avoid a false precondition. Commands sent before any state command count as unknown and give no precondition, the state the device starts in is not read back (the driver sets the mode on the first gated call after open()), and a reopened session resets what the driver knows.

States the device reports, and mode switches inside an action

Some apps decide from the device's own status: the fan's status reply says it is in turbo mode (set with a button on the device or by the app) and only then does the app offer a color. When a status reply byte has a name from seen mode turbo markers (a mode with a value -> word table, or an on/off flag), usb-rea takes, for every action, the last status reply before it (at most 5 s old). A command gets requires with source: "reply" (reply, byte, value, count, other values, reply and command frames) when it was sent at least twice, each time while the reply showed the same value, and other commands were used while it showed another one. A command whose every use was followed by a reply showing one value per argument (mode 3 -> turbo) is the setter. The generated driver reads the status first (query_poll_1()), sends nothing more when it already matches, otherwise calls set_mode(3) and reads it again (StateError when it still differs, when there is no setter, or with Device(auto_state=False)). Try it with make_capture(..., device="fan", reported=True), where press mode N labels stand for the fan's own button.

Other apps switch the mode inside one click: mode 3, the color, then the mode it was in before. Diffed as is, that is a 3-packet "color" transaction whose last byte nobody can explain. When the first packet of a multi-packet action decodes as a state command (every constant byte and the checksum match, the argument is a value that command was captured with) with the same value every time, and the last packet (if there is one) as the same command putting back the value from before the action or one fixed value, the action keeps only its own packets and gets switch (state, enter, restore "previous", a value or null, evidence frames), listed under switches too. The driver's set_color() then sends set_mode(3), the color and set_mode(<what the driver last set>), as the app did. A first packet with different values, or a last one that fits neither rule, stays a plain transaction with a note. See make_capture(..., device="fan", switch=True).

Limits: only named reply bytes count (a raw byte that happens to line up with the commands is not used), the driver puts back only a mode it set itself, and the device's state between status replies is assumed to be the last one reported.

Image streams: pictures and video sent to a screen

Devices with a screen (AIO pump caps, keyboards and stream decks with an LCD) often get a picture or a whole video from the vendor app the entire time you click around: tens of thousands of large packets on one endpoint. Diffed as actions, that traffic buries the few real commands, so a brightness change gets read as "byte 1 of the video". usb-rea first looks for host→device channels where packets start an image (JPEG FF D8 FF, PNG, GIF, BMP BM, WebP RIFF....WEBP) at the same offset in at least 3 frames. That offset is the per-packet header; a frame runs until the image's end marker (JPEG FF D9, with embedded thumbnails counted, PNG IEND), the BMP bfSize or WebP RIFF chunk size byte count, the next start or a pause. Each header byte is described as constant, nn (packets in the frame) or ii (the packet's index), chunks cut off at the start of the capture are recognised by that header, and a fixed device→host message sent about once per frame is the ack. All of it is set aside before background polls, handshakes and actions are analysed, so the commands come from the remaining traffic.

The report gets an "Image stream" section (endpoint, format, frames, packets per frame, image size read from the JPEG SOF / PNG IHDR / GIF screen descriptor / BMP BITMAPINFOHEADER / WebP VP8X, frame rate, chunk size and padding, header pattern, ack), the MCP diff_actions output has streams, and the generated driver gets send_image(jpeg_bytes) (or PNG/GIF/BMP/WebP file bytes), which cuts an image into chunks behind the captured header, fills in the count and index bytes, pads the last chunk and returns the ack. The synthetic LCD streams a 240x240 JPEG video at 20 frames per second next to its brightness command (make_capture(..., device="lcd", image_stream=True), used by usb-rea demo --device lcd), or 64x64 BMP frames with bmp=True / usb-rea demo --device lcd --bmp, or 64x64 WebP frames with webp=True / usb-rea demo --device lcd --webp. On a real AIO pump LCD capture (75,788 image packets, 8,670 frames of a 320x320 JPEG, four brightness writes on another endpoint) this turns a wrong "brightness" made of video bytes into the right one: byte 4 = percent on EP 0x01.

Raw pixel streams have no magic bytes, so they are found by size. Many cheap case and AIO screens take plain RGB565 (2 bytes a pixel) or RGB888 (3 bytes) behind a short draw command. On one host→device channel usb-rea looks for runs of large packets with no pause between them (all but the last the same length) whose payload is exactly width x height x bytes per pixel for a common screen size (80x160 up to 1920x480, both orientations), or exactly the region the short packet sent just before the run names: x, y, width, height or x0, y0, x1, y1 as 16-bit fields (little or big endian), or four 10-bit fields packed into 5 bytes as on the Turing Smart Screen rev A. With a region, partial redraws (a clock, a sensor value) count as frames of the same stream. Per-packet headers are found the same way as for JPEG, and a packet count or index above 255 is now read as a 16-bit field (nn nn, ii ii, with its byte order). A 16- or 32-bit byte count in the draw command is marked ll. For RGB565 the pixel byte order is the one that makes neighbouring pixels smoother. One transfer per frame (a whole screen handed to the USB stack at once) and several frames back to back in one run are split by the screen size. The draw command packets are set aside with the pixels; other commands on the same endpoint (hello, brightness, orientation) stay commands.

The report then says "Raw RGB565 pixels", the screen size and frame size, other sizes with the same byte count, the byte order, the region fields and how many frames redraw only part of the screen, and the draw command pattern (xx/yy position, ww/hh size, ex/ey end position, rr packed region, ll byte count). The driver's send_image() takes a Pillow image (converted to RGB565 in the captured byte order, or RGB888; Pillow is not needed otherwise) or bytes already in that format, writes the draw command with the region filled in and then the pixels, so send_image(clock, x=100, y=8, size=(48, 16)) redraws just a corner. The synthetic LCD can stream raw pixels too: make_capture(..., device="lcd", image_stream=True, raw="rgb565") (160x128, draw command with x, y, width, height as u16 LE, every 4th frame a 48x16 clock) or raw="rgb888" (128x160, 64-byte packets with a u16 LE packet index and count), used by usb-rea demo --device lcd --raw rgb565. The tests also check a Turing Smart Screen rev A fixture written from its public protocol description (6-byte commands, DISPLAY_BITMAP = 197, RGB565 little-endian pixels).

Some screens don't give the draw command a packet of its own: it is the first bytes of the frame's first pixel packet, and the pixels follow right after it in the same packet. The frame is then a few bytes longer than the screen, so usb-rea also reads the region fields from the start of each frame and keeps the reading where every frame is exactly that many pixels plus a command of the same length. The report says "Command at the start of each frame's first packet", the pixels (and the channel order test) are read after the command, and send_image() puts the command in front of the pixels before cutting them into packets, as the app did. Try it with usb-rea demo --device lcd --raw rgb565 --inline (make_capture(..., raw="rgb565", inline=True)).

Whether a screen takes red or blue first can't be read from ordinary pixels (a photo with red and blue swapped is still smooth), so usb-rea doesn't guess. usb-rea testcard -o card.png --size 320x240 writes a picture that is half red, a quarter green, an eighth blue and an eighth white; put it on the screen in the vendor app for a few seconds while capturing. Those shares survive scaling, rotation and mirroring, and only one reading of the pixels gets them right, so the report says "Channel order: BGR" (or RGB, and for RGB565 also the byte order) with the frames and a confidence, and send_image() converts a Pillow image to that order. Without the card it says "unknown" and the driver assumes RGB. Try it with usb-rea demo --device lcd --raw rgb565 --testcard bgr.

Some screens take a frame over more than one host→device endpoint: the packets alternate between two bulk endpoints, the first part of the frame goes to one endpoint and the rest to another, or the draw command goes to the command endpoint (next to brightness) and only the pixels to the data endpoint. One endpoint at a time that looks like broken frames, a JPEG with no end marker or two smaller screens. So for a device with several host→device channels usb-rea also merges them by time and searches again, and keeps the merged stream when most of its frames really use more than one endpoint and it explains as many whole frames and packets as the per-endpoint guesses. Two screens on two endpoints with their own frame rates stay two streams. streams gets endpoints (in the order the frame uses them), endpoint_layout (alternate or blocks) and header_endpoint, the report says where each part goes, and send_image() writes the packets and the draw command to the same endpoints. Try usb-rea demo --device lcd --endpoints alternate (or --raw rgb565 --endpoints command).

Limits: a frame is only merged over data endpoints that mostly use the same packet size, with the same per-packet header on each, and at most 4 data endpoints of one device are tried. A raw stream needs at least 3 frames whose payload is a listed screen size or matches the region fields; a screen size not in the list without a region command is missed, and the same byte count can fit several sizes (320x480 RGB565 is also 480x320, and 320x320 RGB888), which the report lists so you can check on the device. Region fields are looked for in a separate draw command or at the start of the first pixel packet; a command inside the first packet needs region fields (constant bytes alone are not found), at most 32 bytes, and no padding after the pixels. Width and height are expected in that order, the channel order is only known from test card frames, and a frame with a pause longer than 30 ms inside it is split. send_image() does not resize or re-encode (send an image of the captured size and format), and a stream needs at least 3 frames in the capture.

MCP server

pip install usb-rea then add usb-rea mcp as a stdio server. Tools: capture_start, capture_stop, mark_action, diff_actions, report, scaffold_driver, hid_descriptor (decode a HID report descriptor / report payloads), wireshark_dissector, replay_packet (refuses unless the human confirmed). Analysis tools accept the same labels argument as the CLI for marker-free captures.

With uv no install step is needed:

{"mcpServers": {"usb-rea": {"command": "uvx", "args": ["--from", "usb-rea", "usb-rea", "mcp"]}}}

For Claude Code: claude mcp add usb-rea -- uvx --from usb-rea usb-rea mcp. The server is also listed on the official MCP Registry as io.github.emirmrkaljevic/usb-rea and on Glama, which builds it from the repo's Dockerfile and checks that it starts and lists its tools.

How it works

1. usb-rea capture start: record traffic (usbmon / USBPcap)
2. usb-rea mark "brightness 50%": label each action you take in the vendor app (mark "seen rpm 1180" notes what it displays)
3. usb-rea diff: which bytes change per action, value correlation, checksums, counters
4. usb-rea infer: message templates + evidence report
5. usb-rea scaffold: generate a pyusb driver and replay tests
6. usb-rea dissector: write a Wireshark Lua dissector for the inferred protocol
7. usb-rea replay: send packets to the device (only with explicit confirmation)
8. usb-rea hid: decode a HID report descriptor from a capture (GET_DESCRIPTOR 0x22) or from hex, and decode report payloads
9. usb-rea mcp: the same tools as an MCP server for AI agents

Wireshark dissector

usb-rea dissector capture.pcapng -o lamp.lua turns the inferred protocol into a Wireshark Lua plugin, so you can keep capturing and read the traffic as commands instead of hex:

wireshark -X lua_script:lamp.lua capture.pcapngtshark -X lua_script:lamp.lua -r capture.pcapng -Y 'usbrea.command == "brightness"'

Each matching packet gets a usbrea tree with the command name, decoded values (usbrea.brightness.value), counters, lookup labels, and a checksum check (usbrea.checksum_ok, with an expert warning on mismatch); the Info column reads brightness 50. It works for bulk, interrupt and control/HID SET_REPORT transfers, from usbmon or USBPcap, and needs no bit library (Wireshark 3.x and 4.x). -n NAME changes the filter prefix. CI runs every generated dissector through tshark.

HID devices

Most RGB keyboards, mice, headsets and LCD gadgets are HID with a vendor-defined page. If the capture includes the report descriptor (start capturing, then replug the device), the report gets a section with every report's ID, size and fields, and each inferred command is tagged with the HID report it travels in. Without a capture:

usb-rea hid /sys/class/hidraw/hidraw0/device/report_descriptor --itemsusb-rea hid capture.pcapng --decode "10ff0d1d000000" --type Output

Roadmap

• pcap/pcapng parser (usbmon + USBPcap)
• action markers and per-action diffing
• checksum detection (sum8, xor8, neg/inv sum8, CRC8, CRC16 variants)
• evidence-backed protocol report
• driver scaffolding (pyusb, bulk/interrupt + control/HID SET_REPORT)
• confirmed replay
• MCP server
• rolling counters, multi-byte (16/32-bit LE/BE) values, lookup tables, multi-value actions
• packed bitfields
• validation against documented protocols (liquidctl, rivalcfg)
• HID report descriptor decoding (usb-rea hid), with captured commands mapped to their HID reports
• emulated-device CI (dummy_hcd + configfs HID; scripts/gadget_e2e.sh, experimental gadget-e2e workflow)
• real-hardware case studies (ASUS TUF LC III LCD, Corsair Hydro Platinum)
• multi-packet transactions (write + apply), including checksums over earlier packets
• background traffic: periodic status polls / keep-alives are detected and ignored
• device responses: replies to commands, background polls and GET_REPORT decoded, query_*() driver methods
• named readings: seen rpm 1180 markers name and scale reply readings (identity or linear, 8/16/32-bit)
• on/off status flags: seen pump on / seen pump off name single bits of reply bytes
• modes / enum values (seen mode turbo) and signed readings (seen temp -5)
• small levels packed beside flags (seen battery 3 in bits 1-3 of a status byte)
• handshakes: messages sent once when the app opens the device, replayed by the driver with session tokens copied from live replies
• handshake retries: a step the app resent after no reply or a busy reply is resent by the driver too
• handshake reopens: the whole handshake sent again mid-capture is kept out of the actions
• handshake branches: the next steps chosen by a byte of the device's reply, replayed by the driver from the live reply
• state preconditions: commands the app only sent after a mode command chose one value, set first by the driver
• states read from device replies and mode switches inside an action, both replayed by the driver
• image streams: JPEG/PNG/GIF/BMP/WebP frames sent to a screen are kept apart from the commands, send_image() in the driver
• raw pixel streams (RGB565/RGB888 without an image header) and 16-bit header fields
• RGB or BGR channel order (and RGB565 byte order) from frames showing the usb-rea testcard picture
• image streams split over several endpoints (alternating, in blocks, or a draw command on the command endpoint)
• draw commands at the start of the first pixel packet (no packet of their own)

Legal

Reverse engineering for interoperability is permitted (EU Directive 2009/24/EC Art. 6, US DMCA §1201(f)). usb-rea only analyzes traffic of devices you own and never redistributes vendor code.

License

MIT