Mcp Abap Adt Compact Http Ro

[mcp-abap-adt logo] mcp-abap-adt: Your Gateway to ABAP Development Tools (ADT)

[Stand With Ukraine]

mcp-abap-adt is an MCP server for ABAP ADT in SAP ECC/S/4HANA (on-premise) and SAP BTP ABAP Cloud systems. It gives agents controlled access to real ABAP repositories through ADT, so analysis and changes are grounded in system data instead of assumptions. It is built for AI-assisted pair programming (AIPNV: AI Pairing, Not Vibing), not autopilot vibe coding.

Primary workflows:

• Deep ABAP analysis: where-used, object metadata, repository navigation, object structure, semantic analysis, dependency and impact exploration.
• High-level ABAP development: rapid CRUD and iterative updates for RAP and classic ABAP artifacts (classes, interfaces, function groups/modules, programs, DDIC, CDS/view/service artifacts), validated through ADT flows.

Why teams use it:

• Full CRUD (not read-only): create, read, update, and delete ABAP artifacts
• Works with On-Premise (ECC/S/4HANA) and ABAP Cloud (BTP) systems
• Legacy systems (BASIS < 7.50) are not supported at present: that support is parked on the parked/legacy-support branch until it can be tried against a live legacy system
• Three authentications over stdio: basic (HTTP or RFC), SNC (passwordless, RFC), JWT with browser login (service key, ABAP or XSUAA); a JWT you already hold goes in the x-sap-jwt-token header of mcp-abap-adt-http / mcp-abap-adt-sse
• Multiple transports: stdio, HTTP, SSE
• Several installation variants: the full server (@mcp-abap-adt/core) or the compact one (@mcp-abap-adt/compact), each connecting to the system over HTTP, RFC or SNC — see Installation variants
• Rich tool surface for ABAP objects, metadata, transports, and search

Authorization & Destinations (Important): A destination is the filename of a service key stored locally. You place service keys in the service-keys directory, and use --mcp=<destination> to select which one to use. This is the primary auth model for on‑prem and BTP systems. See Authentication & Destinations.

You can configure MCP clients either manually (JSON/TOML) or via the configurator CLI (@mcp-abap-adt/configurator, repo: mcp-abap-adt-conf).

Table of Contents

1. Getting Started
2. Architecture
3. Quick Start
4. Use Cases
5. Target Users
6. Capabilities (High-Level Focus)
7. Terminology
8. Authorization & Destinations
9. Registries
10. Features
11. Documentation
12. Dependencies
13. Running the Server

Getting Started

Pick a variant first — full or compact server, and HTTP, RFC or SNC to the system. HTTP needs nothing but Node.js 22 or 24; RFC and SNC need the SAP NW RFC library when the server runs — SAP GUI's 64-bit sapnwrfc.dll on Windows, else the SAP NW RFC SDK; the RFC module comes prebuilt for Linux x64 (glibc), Windows x64 and macOS ARM64, and npm install compiles nothing. Installation variants has the table and the commands; RFC Setup the steps. To run without Node.js on a machine, build your own portable executable — Node.js and your SAP NW RFC SDK inside.

Install the server and configure your client using the configurator:

npm install -g @mcp-abap-adt/corenpm install -g @mcp-abap-adt/configurator
# stdio (destination)mcp-conf --client cline --name abap --mcp TRIAL
# HTTP (streamable HTTP)mcp-conf --client copilot --name abap --transport http --url http://localhost:3000/mcp/stream/http

Full configurator usage (separate repo): CLIENT_INSTALLERS.md.

Terminology

Destination: a local service key filename. You store service keys in the standard service-keys directory, and pass the filename (without extension) via --mcp=<destination> to select which system to use.

See docs/user-guide/TERMINOLOGY.md for the full list.

Authorization & Destinations

Destination-based auth is the default. Drop service keys into the standard platform folder and use the filename as your destination:

mcp-abap-adt --mcp=TRIAL --system-type=cloud

Standard service key paths:

• Unix (Linux/macOS): ~/.config/mcp-abap-adt/service-keys/<destination>.json
• Windows: %USERPROFILE%\\Documents\\mcp-abap-adt\\service-keys\\<destination>.json

mcp-abap-adt (stdio) supports exactly three authentications, each a destination stated in a service key, a .env, or both; a JWT you hold is sent in headers to the HTTP or SSE server:

A jwt .env must state SAP_GRANT_TYPE. The mcp-auth command that writes such a .env comes from @mcp-abap-adt/auth-broker-cli. The browser login listens on port 61001 unless --browser-auth-port says otherwise.

A created object always carries its responsible person and, where known, its master system. The servers name them once per destination — its credentials and its ABAP system — when its connection is created, by the rules of @mcp-abap-adt/responsible-rules: the system's systeminformation answer (its user, its system id) wins, on-premise and on ABAP Cloud alike; a tool argument that names the value (a transport's owner, say) still states it for that call. When the system gives no information, ABAP Cloud is an error (cloud_without_systeminformation for a 404, else system_lookup_failed); on-premise the responsible is SAP_RESPONSIBLE / x-sap-responsible if stated, else the login (SAP_USERNAME, x-sap-login), and the master system SAP_MASTER_SYSTEM / x-sap-master-system when stated; with no user at all the call is refused system_user_unknown, and a stdio start ends with exit 1. A 401 is answered as it came. The library applies no rules unless an embedder passes them. See Authentication & Destinations. Coming from 22.x? See the 23.0 migration note — CreateProgram no longer offers include (create an include with CreateInclude); an embedder registering the ./handlers groups on its own McpServer states systemType (SAP_SYSTEM_TYPE is not read there), and HandlerExporter serves no background run and no debugger. Coming from 21.x? See the 22.0 migration note — the tools, their enums and the object types each argument accepts are the declared system type's (onprem or cloud), inspection needs --system-type too, function / func are the function module, main types stand for their one code, RunATC on cloud offers no program, and ValidateServiceBinding requires package_name. Coming from 19.x? See the 20.0 migration note — RFC on connection 19 and sap-rfc-lite 0.3.2: nothing compiled on install, a prebuilt binding for Linux x64, Windows x64 and macOS ARM64 only; over Streamable HTTP state_handle is an argument of every tool, and a long session keeps one SAP session across calls. Coming from 18.x? See the 19.0 migration note — the server split into a package per transport and tool set, the system type required, the low set gone, the auth chain on 6.0. Coming from 17.x? See the 18.0 migration note — the debugger's embedder surface moved to adt-clients 29, and a debugger start needs at least one breakpoint. From 16.x, the 17.0 note first.

For full details (paths, .env, direct headers), see Authentication & Destinations.

Architecture

The project ships a library and the servers — and a compact variant of each server — because the two usage patterns want different licences. Embedding the tools in a network service should not drag in the obligations of a server that service never runs.

Eighteen packages, twelve binaries: four kinds of binary — core, core-ro, compact, compact-ro — on each transport. The binary fixes the tool set (19.0.0; there is no --exposition): install the one for your transport and the tools you want to run a server — @mcp-abap-adt/core, http or sse (readonly, high, the debugger), their -ro packages (the readonly tools alone), compact, compact-http, compact-sse, or their -ro packages (the compact tools that change nothing). Install @mcp-abap-adt/lib to embed the tools in your own application. Every binary and its tools: Handler sets.

Each server is installed on its own (npm install -g @mcp-abap-adt/compact): a server package brings everything it runs on — server-runtime, lib and the rest — and depends on no other server package, so installing two servers, in one command or in two, is fine and neither needs the other. Since 19.2.0 a process that loads two copies of @mcp-abap-adt/lib anyway does not start: it prints Two copies of @mcp-abap-adt/lib are loaded in this process (…): reinstall <package> (npm install -g <package>). and exits 1 — see One lib per server process.

1. Standalone MCP Server (Default)

Run as a standalone MCP server; a binary is its transport (there is no --transport option):

mcp-abap-adt --mcp=TRIAL --system-type=cloud # stdio (@mcp-abap-adt/core): one destinationmcp-abap-adt-http --system-type=<onprem|cloud> # Streamable HTTP (@mcp-abap-adt/http): x-sap-* headers per requestmcp-abap-adt-sse --system-type=<onprem|cloud> # SSE (@mcp-abap-adt/sse): x-sap-* headers per SSE connectionmcp-abap-adt-compact --mcp=TRIAL --system-type=cloud # the compact tool set over stdio (@mcp-abap-adt/compact)mcp-abap-adt-compact-http --system-type=<onprem|cloud> # ... over Streamable HTTP (@mcp-abap-adt/compact-http)mcp-abap-adt-compact-sse --system-type=<onprem|cloud> # ... over SSE (@mcp-abap-adt/compact-sse)mcp-abap-adt-ro --mcp=TRIAL --system-type=cloud # the readonly tools alone over stdio (@mcp-abap-adt/core-ro)mcp-abap-adt-compact-ro --mcp=TRIAL --system-type=cloud # the compact tools that change nothing (@mcp-abap-adt/compact-ro)                                       # (and -http-ro, -sse-ro, -compact-http-ro, -compact-sse-ro)

2. Embeddable Server (For Integration)

Embed MCP server into existing applications (e.g., SAP CAP/CDS, Express). This needs @mcp-abap-adt/lib only — not the AGPL server:

npm install @mcp-abap-adt/lib

import { EmbeddableMcpServer } from '@mcp-abap-adt/lib/embeddable';
const server = new EmbeddableMcpServer({  connection,              // Your AbapConnection instance  logger,                  // Optional logger  exposition: ['readonly', 'high'],  // Handler groups to expose  // A tool both groups serve under one name (Get<Type>) is listed once.  // readOnlyDedupStrategy: a custom IReadOnlyDedupStrategy hides more.});await server.connect(transport);

See Handlers Management → EmbeddableMcpServer dedup strategies for how readonly tools are deduped against high and how to plug a custom IReadOnlyDedupStrategy for role-based rules.

Quick Start

1. Install server: pick the installation variant — full or compact, HTTP, RFC or SNC — and follow the Installation Guide
2. Configure client (auto): Use mcp-conf from @mcp-abap-adt/configurator (repo: mcp-abap-adt-conf, docs: CLIENT_INSTALLERS.md)
3. Configure client (manual): See Client Configuration
4. Use:
   • Read-Only Tools
   • High-Level Tools
   • Compact Tools — the single-step operations (lock, write under the lock, unlock, check, activate) the low set had; the low set left mcp-abap-adt / -http / -sse in 19.0.0 (MIGRATION-19.0)

Use Cases

• Impact analysis / where-used before changes: map object usage and probable blast radius.
• Dependency audit: inspect links across classes, interfaces, DDIC, CDS/views, and RAP artifacts.
• Migration and cleanup prep: extract repository facts to plan refactoring or cloud-readiness work.
• RAP and ABAP iterative development: create/update artifacts quickly with ADT-backed operations.
• Automated documentation and RAG ingestion: pull structured facts from ABAP systems for downstream tooling.

Target Users

• ABAP developers and ABAP architects
• RAP developers
• Team leads and tech leads who need fast repository visibility
• Teams building RAG/agent workflows for SAP landscapes

Capabilities (High-Level Focus)

Key examples of high-value workflows and tools:

• Repository and impact analysis: GetWhereUsed, DescribeByList, GetObjectStructure, GetObjectInfo, SearchObject, GetPackageTree, GetPackageContents
• Code and semantic introspection: GetAbapAST, GetAbapSemanticAnalysis, GetIncludesList
• RAP development: CreateBehaviorDefinition, UpdateBehaviorDefinition, CreateBehaviorImplementation, UpdateBehaviorImplementation, CreateServiceDefinition, UpdateServiceDefinition, CreateMetadataExtension, UpdateMetadataExtension
• CDS/View development: CreateView, UpdateView, GetView, DeleteView
• ABAP OO CRUD: CreateClass, UpdateClass, GetClass, DeleteClass, CreateInterface, UpdateInterface, GetInterface, DeleteInterface
• Function module/group CRUD: CreateFunctionGroup, UpdateFunctionGroup, GetFunctionGroup, DeleteFunctionGroup, CreateFunctionModule, UpdateFunctionModule, GetFunctionModule, DeleteFunctionModule
• Transport and activation support: CreateTransport, GetTransport, ActivateObject
• Quality and testing: RunATC, GetATCRunStatus, GetATCFindings (ABAP Test Cockpit — one run over several objects, findings read back by worklist), ListATCResults, GetATCResult (the stored ATC results — central and users' runs — listed by user, kind and age, one read by its Display ID), ABAP Unit per test carrier — CreateUnitTest/UpdateUnitTest/DeleteUnitTest/RunUnitTest for a class, CreateCdsUnitTest/RunCdsUnitTest for a CDS view, CreateProgramUnitTest/RunProgramUnitTest for a report, CreateFunctionGroupUnitTest/RunFunctionGroupUnitTest/RunFunctionModuleUnitTest for a function group (runner: 'async', the default, starts the run; with wait: true, the default, the call reads the run's status once by long polling and answers the result of a run SAP answers finished, lasting as long as the run, or the run_id and SAP's status for a run SAP answers with another status, read on by run_id; with wait: false it answers the run_id right after the start, which GetUnitTestResult reads — the way to start a long run under a client with a request time limit; runner: 'sync' is one request to /abapunit/testruns answering the finished result — for a system that has that endpoint alone; a function module's synchronous run takes function_group_name and covers every test of its group), and RunAbapUnit (with the same wait) for any ABAP Unit run target: an object of any type of the run registry (CLAS/OCL, DDLS/DF, …) or a package, with or without its subpackages; a CDS view's tests are assigned tests and execute with scope.foreign_tests: true — CheckClass and the rest of the Check* family

Long reads take a timeout

The long reads on an approved list (where-used and search, package walks, data preview, the dump feed, profiler traces, … — the list in MIGRATION-19.0) run on an ABAP session of their own and take an optional timeout in seconds, with no default. When it passes the read is cancelled — its session logged off — and nothing was changed. Set it below your MCP client's request limit (the TypeScript SDK's client cancels at 60 s): a tool call cannot be cancelled — a client's cancel aborts nothing, the call runs to its end. No other tool takes a timeout: a unit test, ATC, class or program run goes on to its end.

Batch mode

Calls none of whose requests depends on another's answer can be recorded and sent together, in one ADT batch envelope, instead of one request each: BatchBegin switches the server into batch mode, every such call is then recorded, answers nothing and takes the next number (from 1, in the order made), BatchEnd sends them all and leaves batch mode whatever happens, and BatchAnswers reads each call's answer by its number — the answer the tool gives outside batch mode for what SAP answered. The compact binaries serve the same as one tool, HandlerBatch (action: 'begin' | 'end' | 'answers'). Every binary serves it, the -ro ones included, on every transport.

A tool that builds a request from an earlier answer is refused in batch mode — a high-level create or update, a fallback after a 404, a poll. Run such work as phases, each its own batch, with the single-step tools: create (compact HandlerCreate, one request), lock (HandlerLock; the handles read with BatchAnswers), write (HandlerUpdate with lock_handle, one request; the whole metadata document in source_code for PACKAGE, DOMAIN, DATA_ELEMENT, FUNCTION_GROUP and TABLE_TYPE, and for INCLUDE with part: 'metadata'), unlock (HandlerUnlock), read back (HandlerGet, one request per part: source or metadata), activate (HandlerActivate, one request; a list, an object_adt_type and the types the per-object activation leaves to a run answer { run_id }), and the run's state (HandlerGet part: activation_status, then activation_results, by run_id, as often as you choose); a unit-test run is one request with the synchronous runner (HandlerUnitTestRun with runner: 'sync', answering the finished result) or, with the asynchronous runner (runner: 'async', the default), its start (HandlerUnitTestRun, answering run_id; by tests, or by a run target — an object of any run type or a package — which takes this runner), its status (HandlerUnitTestStatus, as often as you choose, until FINISHED) and its result (HandlerUnitTestResult, one request); a profiled run is its schedule (HandlerProfileSchedule, answering profiler_id), the run under it (HandlerProfileRun with that profiler_id) and its trace (HandlerProfileList, as often as you choose, then HandlerProfileView); a deletion is a deletion check (HandlerDeletionCheck, one request) and then the delete (HandlerDelete, the deletion request alone). A batch holds one kind of request — LOCK, UNLOCK or stateless, as its first recorded call decides — so each batch end sends one envelope; a call of another kind is refused batch_other_kind: record it in the next batch. Every tool's description ends with one sentence saying how it behaves in batch mode: recordable, recordable for the arguments it names, or run outside batch mode. Over Streamable HTTP, send the state_handle BatchBegin answers as the state_handle argument (or in the x-mcp-state-handle request header) on every call of the batch. See Batch Mode, with the list of every recordable call.

Registries

Published in the official MCP Registry and listed on Glama.ai.

• MCP Registry: docs/deployment/MCP_REGISTRY.md
• Glama.ai: [圖片]

Features

• 🏗️ Domain Management: GetDomain, CreateDomain, UpdateDomain - Create, retrieve, and update ABAP domains
• 📊 Data Element Management: GetDataElement, CreateDataElement, UpdateDataElement - Create, retrieve, and update ABAP data elements
• 📦 Table Management: GetTable, CreateTable, GetTableContents - Create and retrieve ABAP database tables with data preview
• 🏛️ Structure Management: GetStructure, CreateStructure - Create and retrieve ABAP structures
• 🧾 Table Type Management: GetTableType, CreateTableType, UpdateTableType, DeleteTableType, CheckTableType, ActivateTableType, GetTableTypeVersions - Create, read, change, check, activate and delete ABAP table types (on premise and cloud); the create and the update take the definition (row type, access, key) and answer the definition SAP stored
• 👁️ View Management: GetView, CreateView, UpdateView - Create and manage CDS Views and Classic Views
• 🎓 Class Management: GetClass, CreateClass, UpdateClass - Create, retrieve, and update ABAP classes
• 📝 Program Management: GetProgram, CreateProgram, UpdateProgram - Create, retrieve, and update ABAP programs
• 🔧 Behavior Definition (BDEF) Management: GetBehaviorDefinition, CreateBehaviorDefinition, UpdateBehaviorDefinition - Create and manage ABAP Behavior Definitions with support for Managed, Unmanaged, Abstract, and Projection types
• 📋 Metadata Extension (DDLX) Management: CreateMetadataExtension, UpdateMetadataExtension - Create and manage ABAP Metadata Extensions
• ⚡ Activation: ActivateObject - Universal activation for any ABAP object
• 🚚 Transport Management: CreateTransport, GetTransport - Create and retrieve transport requests
• 🔍 Enhancement Analysis: GetEnhancements, GetEnhancementImpl, GetEnhancementSpot - Enhancement discovery and analysis
• 📋 Include Management: GetInclude (source or metadata), CreateInclude, UpdateInclude, UpdateIncludeMetadata, DeleteInclude, ActivateInclude - Create, read, change and delete program includes (writes on premise); GetIncludesList - Recursive include discovery
• 🔍 System Tools: GetInactiveObjects - Monitor inactive objects waiting for activation
• 🌐 Service Binding Preview: GetServiceBindingPreviewUrl - The browser URL that opens a published service binding's Fiori preview, beside its OData service and $metadata URLs. Composed from the binding, its service definition and the exposed root view — no document carries it. OData V2 and V4; a Web API binding has no preview and says so. On SAP BTP the preview URL carries the browser host (abap-web), where the BTP logon answers, while the service URLs keep the ADT host
• 🧪 Runtime Diagnostics: RuntimeCreateProfilerTraceParameters, RuntimeListProfilerTraceFiles, RuntimeGetProfilerTraceData, RuntimeGetDumpById - Profiling and dump analysis with JSON payloads
• 📡 Runtime Feeds: RuntimeListFeeds, RuntimeListSystemMessages, RuntimeGetGatewayErrorLog - Feed reader (dumps — filtered by user, runtime error, exception, object, package or component, and read past SAP's 100 entries per request — system messages, gateway errors), SM02 system messages, Gateway error log
• 🐞 Debugger (in mcp-abap-adt, -http, -sse and the compact write binaries; in no -ro binary): ABAP and AMDP — breakpoints (line, exception, statement, message; a line breakpoint may carry a condition), a background run of a class or report caught at them, another user's requests and terminal mode, stack, variables, watchpoints, steps, leaving a debuggee running, the debugger settings, memory sizes and snapshots. A debug session is named by a state_handle and survives between tool calls on every transport. In user mode a breakpoint catches every request of the request user (the connected SAP user unless another is named): where that must not be possible, install a -ro binary. See Debugger
• 🔗 Long session over Streamable HTTP (mcp-abap-adt-http, -compact-http and their -ro): every tool takes an optional state_handle argument that routes the call to the instance holding that state (a lock, a batch, a debug session); SessionOpen / SessionClose (compact: HandlerSession) keep one instance and its SAP session for a run of calls and log it off at the close, or at the idle bound. See @mcp-abap-adt/http
• 🚀 SAP BTP Support: JWT/XSUAA authentication with browser-based token helper
• 🔑 Destination-Based Authentication: Service key-based authentication with automatic token management (see Client Configuration)
• 💾 Freestyle SQL: GetSqlQuery - Execute custom SQL queries via ADT Data Preview API

ℹ️ ABAP Cloud limitation: Direct ADT data preview of database tables is blocked by SAP BTP backend policies. The server returns a descriptive error when attempting such operations. On-premise systems continue to support data preview.

Documentation

For Users

• Docs Index - Full documentation index
• Installation Guide - Installation variants (full or compact; HTTP, RFC or SNC) and platform guides
• RFC Setup - RFC and SNC: the SAP NW RFC library at run time, the prebuilt RFC module and where to build one
• User Guide - End-user docs (auth, config, tools)
• Authentication & Destinations - Destination-based auth and service keys
• Batch Mode - Record independent calls, send them together in batch envelopes at BatchEnd, read their answers by number; which calls are recorded
• Tool Search - The three texts each listed tool carries — description for the model, keywords for BM25, semantic for vector search — and where a client reads them
• Debugger - The debug set of the write binaries: debug sessions and their handle, the SAP ids, what keeps a session alive on each transport, what ends it
• Handlers Management - The twelve binaries and the tools each serves
• Configurator: @mcp-abap-adt/configurator (repo: mcp-abap-adt-conf) provides the mcp-conf CLI to auto-configure clients
• Tools by level
  • Read-Only Tools
  • High-Level Tools
  • Compact Tools (the low set's analogue since 19.0.0)

For Administrators

• Security - Never more secure than its host: who may call the server, HTTPS, TLS to SAP, credentials and state handles, a deployment checklist
• Deployment Docs - MCP Registry, Docker, release notes
• Server Configuration - YAML config reference

For Developers

• Architecture Documentation - System architecture and design decisions
• Development Documentation - Testing guides and development resources
• CHANGELOG.md - Version history and changes
• docs/MIGRATION-23.0.md - Includes are created by CreateInclude, not CreateProgram; the include and table-type tools; a plain ./handlers registration lists and calls on its stated system type; ToolHandler is either call form; HandlerExporter without background runs and the debugger; compact cloud schemas; the search table's shape
• docs/MIGRATION-22.0.md - The system type decides the tools and the object types each argument accepts (the ADT type tables of interfaces-adt 24, adt-clients 39); inspection needs the system type; friendly names and main types; the search filter's names; RunATC per system type; arguments now required
• docs/MIGRATION-20.0.md - RFC on connection 19 and sap-rfc-lite 0.3.2: nothing compiled on install, prebuilt bindings for three platforms, the RFC library at run time, the portable build on 0.3 only; Streamable HTTP: held state by the state_handle argument, and the long session
• docs/MIGRATION-19.0.md - A package per transport and tool set (seventeen packages, twelve binaries), the system type required, the low set gone, the auth chain on 6.0, logoff at every session end
• docs/MIGRATION-18.0.md - The debugger on adt-clients 29: what an embedder of lib/debugger changes; a start needs a breakpoint
• docs/MIGRATION-17.0.md - The HTTPS certificate is verified; a message class needs a responsible
• docs/MIGRATION-16.0.md - Authentication on auth-broker 4: four authentications, destinations
• docs/MIGRATION-14.0.md - The compact facade moved to its own packages and --exposition=compact became the mcp-abap-adt-compact command
• docs/MIGRATION-13.0.md - What a consumer on the 12.x contract changes
• docs/MIGRATION-12.0.md - What a consumer on the 11.x contract changes

Dependencies

Two packages do the work:

• @mcp-abap-adt/connection – connection/auth/session layer
• @mcp-abap-adt/adt-clients – Builder-first ADT clients

and six packages declare the contracts both of them and this project are written against — @mcp-abap-adt/interfaces-adt, -adt-connection (where IAbapConnection and IAdtWireResponse live), -network, -auth, -auth-sap and -utils. They replace the single @mcp-abap-adt/interfaces umbrella, which is no longer published: a consumer naming a contract package directly gets one copy of it in the tree and takes its majors one domain at a time.

The verdict on an ADT answer is a strategy, not a default: since adt-clients 23 no member judges its own answer, and @mcp-abap-adt/adt-strategies holds the readings this project passes to every call. That is what keeps a refusal ADT embeds in an HTTP 200 — an activation that did not activate, a delete that was refused — from reaching a caller as success.

Everything above is installed by npm install and published to npm. @mcp-abap-adt/sap-rfc-lite is optional and only needed for the RFC transport (and so for SNC). It has no install script: it carries a prebuilt binding for Linux x64 (glibc), Windows x64 and macOS ARM64 and compiles nothing on install; elsewhere a binding is built by hand. At run time it needs the SAP NW RFC library — SAP GUI's 64-bit sapnwrfc.dll in System32 on Windows, else the SAP NW RFC SDK. Check it is installed with npm ls -g @mcp-abap-adt/sap-rfc-lite. See RFC Setup.

Running the Server

Global Installation (Recommended)

After installing globally with npm install -g, you can run from any directory:

# Show helpmcp-abap-adt --help
# Default stdio mode (for MCP clients; the destination comes from --mcp, or from a .env file named with --env or --env-path: a .env in the working directory is read only when named)mcp-abap-adt --system-type=<onprem|cloud>
# Streamable HTTP on a custom port (@mcp-abap-adt/http; credentials from x-sap-* headers)mcp-abap-adt-http --port=8080 --system-type=<onprem|cloud>
# Use stdio mode with auth-broker (--mcp parameter)mcp-abap-adt --mcp=TRIAL --system-type=cloud
# Use env destination from platform sessions storemcp-abap-adt --env=trial --system-type=cloud
# Use explicit .env file pathmcp-abap-adt --env-path=/path/to/my.env --system-type=<onprem|cloud>
# SSE (@mcp-abap-adt/sse; credentials from the opening GET's x-sap-* headers)mcp-abap-adt-sse --sse-port=3001 --system-type=<onprem|cloud>
# The compact servers take their full counterpart's options; the binary fixes the toolsmcp-abap-adt-compact --env-path=/path/to/my.env --system-type=<onprem|cloud> # npm install -g @mcp-abap-adt/compactmcp-abap-adt-compact-http --port=8080 --system-type=<onprem|cloud> # npm install -g @mcp-abap-adt/compact-httpmcp-abap-adt-compact-sse --sse-port=3001 --system-type=<onprem|cloud> # npm install -g @mcp-abap-adt/compact-sse
# The read-only servers: the same options, the tools that change nothingmcp-abap-adt-ro --env-path=/path/to/my.env --system-type=<onprem|cloud> # npm install -g @mcp-abap-adt/core-romcp-abap-adt-compact-http-ro --port=8080 --system-type=<onprem|cloud> # npm install -g @mcp-abap-adt/compact-http-ro

Development Mode

npm installnpm run buildnpm test

The checkout is not runnable as a server by itself: server/ takes @mcp-abap-adt/lib as a package. To run a build, pack both and install the tarballs together — see From source.

Environment Configuration

Env resolution:

1. --env-path=<path|file> (or MCP_ENV_PATH) for explicit .env file.
   • Absolute path: used as-is.
   • Relative path or file name only (e.g. my.env): resolved from current working directory.
2. --env=<destination> for destination file in standard sessions store:
   • Unix: ~/.config/mcp-abap-adt/sessions/<destination>.env
   • Windows: %USERPROFILE%\\Documents\\mcp-abap-adt\\sessions\\<destination>.env

Nothing is looked up in the working directory: a server started inside someone else's project must not take their settings. A .env there is read only when you name it (--env-path=./.env).

Whichever file is chosen is read and written back with a renewed token, whatever --unsafe says. A destination is read once per process: a change to its .env from outside takes effect on restart. .env and environment variables hold secrets and the session; a YAML config file holds configuration only and refuses a secret-looking key.

Example .env file:

SAP_URL=https://your-sap-system.exampleSAP_CLIENT=100SAP_AUTH_TYPE=basicSAP_CONNECTION_TYPE=httpSAP_USERNAME=your-usernameSAP_PASSWORD=your-password

A destination states its connection type: SAP_CONNECTION_TYPE (http or rfc) in its .env, --connection-type, the process environment or YAML connection-type. There is no default; a destination that states none is refused at startup, naming the places it can be set. A service key carries none, so a --mcp destination read from one takes it from the command line, the environment or YAML.

A JWT you already hold is not served over stdio: send it in the x-sap-jwt-token header to mcp-abap-adt-http or mcp-abap-adt-sse (@mcp-abap-adt/http, @mcp-abap-adt/sse), or create the session with mcp-auth.

For RFC connection:

SAP_URL=http://your-onprem-system.example:8000SAP_CLIENT=100SAP_AUTH_TYPE=basicSAP_USERNAME=your-usernameSAP_PASSWORD=your-passwordSAP_CONNECTION_TYPE=rfc

SAP_CONNECTION_TYPE=rfc in the destination's .env (the --env / --env-path file, or <auth-broker-path>/sessions/<name>.env for --mcp=<name>) selects RFC, as do --connection-type=rfc, the process environment and YAML connection-type: rfc. Precedence: CLI, then the process environment (which the .env value joins, never over one already set), then YAML. Over RFC the host comes from SAP_URL and the system number from its port (80NN → NN); a port that follows no such rule needs SAP_SYSNR in the process environment. See RFC Setup Guide for prerequisites (SAP NW RFC SDK, a C++ toolchain, SAPNWRFC_HOME before the install).

Through a message server and a logon group (load-balanced logon): add SAP_MSHOST with SAP_MSSERV or SAP_SYSID (one of the two is required; SAP_MSHOST with neither is refused by @mcp-abap-adt/connection, naming both), and optionally SAP_GROUP (the logon group; PUBLIC when absent — connection's default, not the server's) and SAP_SAPROUTER (works with either addressing). Each is also --mshost, --msserv, --sysid, --group, --saprouter, or the YAML key of that name, with the same precedence as the connection type; in the .env they belong to the --env / --env-path file. With SAP_MSHOST the RFC wire takes no host and no system number from SAP_URL, and SAP_SYSNR is not read; SAP_URL is still the system's URL. The server passes the five fields as configured and adds nothing. Logon through a message server is implemented and unit-tested, but not yet measured on a live system (as of 2026-10-20): if the SDK refuses SAP_MSSERV without SAP_SYSID, add SAP_SYSID.

SAP_URL=http://your-onprem-system.example:8000SAP_CLIENT=100SAP_AUTH_TYPE=basicSAP_USERNAME=your-usernameSAP_PASSWORD=your-passwordSAP_CONNECTION_TYPE=rfcSAP_MSHOST=your-message-server.exampleSAP_SYSID=ABCSAP_GROUP=PUBLIC# Optional: SAP_MSSERV=sapmsABC, SAP_SAPROUTER=/H/your-router.example/S/3299/H/

For SNC (passwordless logon over RFC, no user or password):

SAP_URL=http://your-onprem-system.example:8000SAP_CLIENT=100SAP_CONNECTION_TYPE=rfcSAP_AUTH_TYPE=sncSAP_SNC_PARTNERNAME='p:CN=<system>, O=<org>, C=<country>'# Creates need a responsible person; over SNC no login is knownSAP_RESPONSIBLE=<your ABAP user># Optional: SAP_SNC_QOP, SAP_SNC_LIB, SAP_SNC_MYNAME

The credential of the installed SNC product (for example a Secure Login Client) is mapped to an ABAP user by its SNC name. SAP_CONNECTION_TYPE=rfc (or --connection-type=rfc) is required: SNC logs on over RFC only, and an SNC destination with HTTP is refused. SNC needs the SAP NW RFC library (SAP GUI's on Windows, else the SDK) and @mcp-abap-adt/sap-rfc-lite, an optional dependency — see RFC Setup.

Not supported since 16.0: SAP_AUTH_TYPE=certificate and kerberos, saml, and a jwt grant other than authorization_code and none, in a .env or service key are refused at startup, naming the authentication (a saml destination with no grant: cannot be used: grantType). See the migration note for what to do instead.

Generate a .env (JWT):

# Install the CLI globally (one-time setup) — it ships mcp-authnpm install -g @mcp-abap-adt/auth-broker-cli
# Log in and write a .env that states its authentication and grant (--type xsuaa for an XSUAA key)mcp-auth --service-key ./service-key.json --output ./mcp.env --type abap# or a destination: mcp-auth --destination TRIAL --type abap   (`mcp-auth --help` lists the rest)

The .env states SAP_AUTH_TYPE and SAP_GRANT_TYPE; a jwt .env without a grant is refused at startup.

.env comments rule: only full-line comments are supported (lines that start with #).
Inline comments are not parsed, so keep comments on separate lines.

Claude recommendation: place the service key in the service-keys directory and use --mcp=<destination> (avoid manual JWT tokens).

Command-Line Options

Authentication:

• --mcp=<destination> - Named destination: service-keys/<destination>.json and sessions/<destination>.env, field by field
• --auth-broker-path=<path> - Custom path for auth-broker service keys and sessions
• --browser=<name> - Browser for a login: system (default), auto, chrome, edge, firefox, none, headless — mapped by the platform; none / headless: the URL on stderr (Authentication)
• --browser-program=<program> - The program that opens the login URL instead (excludes --browser)
• --renewal=<mode> - refresh-then-login (default) or refresh-only (never a login)
• --browser-auth-port=<port> - Browser login callback port, 1-65535 (default: 61001); an invalid value is refused at startup
• --login-timeout=<seconds> - Ends a browser login not finished after this many seconds, 1-86400; no default (a login ends on its answer, the IdP's refusal or the end of its session; a cancel ends nothing)
• --connection-type=<http|rfc> - SAP connection transport: http or rfc; required for a destination unless its .env, the environment or YAML states it (no default)
• --mshost, --msserv, --sysid, --group, --saprouter - RFC through a message server and a logon group (SAP_MSHOST, … — see above)
• --unsafe - Write named destinations' sessions to disk. By default they are kept in memory (one login per process). A .env you name is written back either way

When --mcp=<destination> is specified, automatic fallback loading of ./.env is skipped.

Examples:

# Named destination, session kept in memory (default)mcp-abap-adt --mcp=TRIAL --system-type=cloud
# Named destination, session persisted to sessions/TRIAL.envmcp-abap-adt --mcp=TRIAL --unsafe --system-type=cloud
# Custom base directory for service-keys/ and sessions/mcp-abap-adt --mcp=TRIAL --auth-broker-path=~/prj/tmp/ --unsafe --system-type=cloud
# Browser login on another callback portmcp-abap-adt --mcp=TRIAL --browser-auth-port=61005 --system-type=cloud

See Client Configuration for complete configuration options.

Handler logging switches

• AUTH_LOG_LEVEL=error|warn|info|debug — sets base log level for handler logger; DEBUG_AUTH_LOG=true also enables debug.
• HANDLER_LOG_SILENT=true — fully disables handler logging.
• DEBUG_CONNECTORS=true — verbose connection logging in high-level handlers.
• DEBUG_HANDLERS=true — enables verbose logs for selected read-only/system handlers.

Development

Testing

npm test

Test logging switches

• TEST_LOG_LEVEL=error|warn|info|debug — controls test logger verbosity (DEBUG_TESTS/DEBUG_ADT_TESTS/DEBUG_CONNECTORS force debug).
• TEST_LOG_FILE=/tmp/adt-tests.log — writes test logs to a file (best-effort).
• TEST_LOG_SILENT=true — disables test logging pipeline (console output muted).
• TEST_LOG_COLOR=true — adds colored/prefixed tags to test log lines.
• All console.* in tests are routed through the test logger with a [test] prefix.

Building

npm run build

Developer Tools

# Generate tool documentationnpm run docs:tools
# See tools/README.md for more developer utilities

Contributors

Thank you to all contributors! See CONTRIBUTORS.md for the complete list.

Acknowledgment: This project was originally inspired by mario-andreschak/mcp-abap-adt. We started with the core concept and then evolved it into an independent project with our own architecture and features.

License

Two licences: the libraries Apache-2.0, the servers AGPL. Which one applies depends on which package you install.

All eighteen are published from this repository with one command, in dependency order (Release):

npm run release:dry        # rehearses every package, touches nothingnpm run release:publish    # @mcp-abap-adt/lib first, then the packages that depend on it

release:publish skips a version already on the registry, so re-running after a failure resumes rather than starting over. It aborts on the first failure instead of publishing a package on top of one that is not there.

Note that npm publish and npm run are different commands. npm publish release asks npm to publish a package named release, which is somebody else's package on the registry.

Copyright © 2025–2026 Oleksii Kyslytsia

All are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

What this means. Running any of them, on your own data, carries no conditions.

Embedding the library in your own application carries no obligation to open your application: Apache-2.0 asks for the notice and the licence text to travel with it, and nothing more.

Distributing the standalone server, or running a modified version of it as a network service, means passing on the same freedoms under AGPL section 13 — including the source. That is why the two are separate packages: installing the library never puts the server in your dependency tree.

The packages underneath are LGPL-3.0-only — @mcp-abap-adt/adt-clients, adt-strategies, connection, logger, auth-broker, auth-providers, auth-stores and the contract packages interfaces-adt, interfaces-adt-connection, interfaces-network, interfaces-auth, interfaces-auth-sap and interfaces-utils — and the library links them at runtime. It was four of them when this paragraph was written; the rule is the whole scope now, libraries LGPL and servers AGPL or GPL, and the MIT that a few of the auth packages still carried was an oversight rather than an offer. LGPL does not reach your own code, but its terms do travel with those packages whatever this project is licensed as. Plan for that, not for the notice on this repository.

Other terms are possible. Apache-2.0 is what the library is offered under publicly, not the only way it can be offered. The copyright holder may license the same code separately to a party who needs different terms; that takes nothing away from anyone who received it under Apache-2.0, which is permanent. CONTRIBUTORS.md records what keeps that option open, including the rule that no LGPL code from the packages underneath is ever copied into this tree.

History. Releases through 8.13.0 were MIT and stay MIT; 9.x was GPL-3.0-only. A licence change is not retroactive — anyone may still take an earlier release under the licence it carried. See CONTRIBUTORS.md for the full account of how the relicensing was lawful.