MoldSim MCP Server

io.github.kobzevvv由 GitHub 帳號 kobzevvv 發布v0.4.1更新於 Oct 24, 2026

Injection molding simulation expertise — materials, process validation, and DFM checks

概覽

AI 產生的概覽

本機 MCP 伺服器,為 AI 助理提供射出成型專業知識:材料性質、製程驗證、DFM 檢查與模擬規格產生。

可以做什麼
依知識庫回答缺陷、DFM 規則、網格策略與製程優化等自由文字問題(query_simulation_knowledge)。查詢材料資料,如 Cross-WLF 黏度、Tait PVT、熱學、力學與加工窗口(get_material_properties)。將熔膠溫度、模具溫度等製程參數與材料加工窗口比對,給出錯誤、警告與建議(validate_process_parameters)。把自然語言描述的零件轉為結構化模擬規格,含分析序列、網格建議與製程條件(generate_simulation_spec)。並排比較 2 至 4 種材料(compare_materials)。依壁厚、肋、拔模角等參數產生 15 項以上的 DFM 檢查清單及通過、警告、失敗評級(generate_dfm_checklist)。
適用情境
適合在射出件設計或模擬工作中,讓助理提供材料資料、核對製程設定、草擬模擬規格或執行 DFM 檢查,省去手動查表。它提供與軟體無關的參考知識,不能取代實際執行 Moldflow、Moldex3D 等求解器。
執行需求
透過 stdio 在本機執行,通常以 npx 啟動 npm 套件 moldsim-mcp,因此需要 Node.js。未宣告帳號、API 金鑰、環境變數或標頭。README 提到本機嵌入式向量資料庫與 HuggingFace 嵌入模型,首次使用可能需下載模型檔案。
安裝前請注意
所有工具皆為唯讀查詢與檢查,不寫入、傳送或刪除資料。材料資料與 DFM 評級屬參考性建議,用於生產決策前應核對供應商資料表與自有模擬結果。README 未說明知識庫來源及其時效性。

安裝

在 SourceWeft 中

  1. 開啟 儀表板中的 MoldSim MCP Server,將其新增到工作區。
  2. 為需要使用其工具的對話啟用該服務。

Desktop only,透過 STDIO。 STDIO 服務會啟動本機處理程序,因此需要 SourceWeft 桌面主機。

其他 MCP 客戶端

參照 儲存庫 中的啟動說明。

README

MoldSim MCP Server

[MIT License] [npm] [MCP]

Give your AI assistant injection molding expertise.

An MCP (Model Context Protocol) server that gives AI assistants expert knowledge about injection molding simulation. Material properties, process validation, troubleshooting, and simulation specification generation — all available as tools.

Website: moldsim.com

Why

Setting up injection molding simulations (Moldflow, Moldex3D, Cadmould) requires deep knowledge: Cross-WLF viscosity models, Tait PVT data, processing windows, mesh strategies, DFM rules. This MCP server makes that knowledge available to any AI assistant that supports MCP.

Quick Start

Claude Code (recommended)

bash
claude mcp add moldsim -- npx -y moldsim-mcp

That's it. Ask Claude about injection molding — it will automatically use MoldSim tools.

bash
claude "What causes warpage in glass-filled nylon parts?"claude "Give me the Cross-WLF parameters for PC/ABS"claude "Validate: ABS at 245C melt, 60C mold, 2.5mm wall"

Claude Desktop

Add to ~/Library/Application Support/Claude/claude_desktop_config.json (macOS) or %APPDATA%/Claude/claude_desktop_config.json (Windows):

json
{  "mcpServers": {    "moldsim": {      "command": "npx",      "args": ["-y", "moldsim-mcp"]    }  }}

From source

bash
git clone https://github.com/kobzevvv/moldsim-mcp.gitcd moldsim-mcpnpm installnpm run build

Then point your MCP client to node dist/index.js.

Tools

query_simulation_knowledge

Free-text Q&A against the knowledge base. Ask about defects, DFM rules, mesh strategies, process optimization.

"Why is my part warping?" → causes, solutions, simulation checks"What mesh type should I use?" → midplane vs dual-domain vs 3D guidance"How to reduce cycle time?" → cooling optimization strategies

get_material_properties

Material property lookup. Returns Cross-WLF viscosity, Tait PVT, thermal, processing window, and mechanical data.

21 materials included: ABS, PP Homo, PP Copo, PA6, PA66, PA66-GF30, PC, PC/ABS, POM, HDPE, LDPE, PMMA, PBT, PBT-GF30, PET, PS, HIPS, TPU, SAN, ASA, PPE/PS

"PA66-GF30" → Cross-WLF coefficients, Tait PVT, processing window 275-310°C, fiber effects"PC" → all properties or filter by group (viscosity, thermal, processing)

validate_process_parameters

Checks your process parameters against the material's processing window. Flags errors, warnings, and provides suggestions.

material: "ABS", melt_temp_C: 280 → ERROR: exceeds max 260°C, risk of degradationmaterial: "PA66", mold_temp_C: 40 → WARNING: below min 70°C, poor crystallization

generate_simulation_spec

Natural language → structured simulation specification. Describe the part and get back analysis types, mesh recommendations, process conditions, and expected outputs.

"Automotive dashboard panel in PC/ABS, 2.5mm wall, warpage analysis"→ Fill+Pack+Cool+Warp sequence, dual-domain mesh, process conditions, expected outputs

compare_materials

Side-by-side comparison of 2-4 materials. Processing windows, thermal properties, mechanical data, and auto-generated key differences.

["abs-generic", "pc", "pa66-gf30"] → comparison table with stiffness, shrinkage, heat resistance diffs

generate_dfm_checklist

Design for Manufacturability checklist with pass/warn/fail ratings. Input part parameters and get 15+ DFM rule checks.

material: "ABS", wall: 2mm, rib: 1.5mm, draft: 0.5°→ 16 checks: wall OK, rib WARN (75% ratio), draft WARN (below 1°), sink risk, venting...

Examples

Ask your AI assistant:

  • "What are the Cross-WLF parameters for PA66-GF30?"
  • "I'm getting sink marks on my PC housing — what should I check?"
  • "Validate my process: ABS at 250°C melt, 70°C mold, 2mm wall"
  • "Generate a simulation spec for a PP container with 1.5mm walls"
  • "Compare ABS vs PC vs PA66-GF30 for an automotive connector"
  • "Run a DFM check: 2mm wall, 1.5mm ribs, 0.5° draft in PC"
  • "What mesh type should I use for a thick-walled POM gear (5mm)?"
  • "How do I fix warpage in a glass-filled PA66 connector?"

Knowledge Coverage

AreaCoverage
Materials21 grades with Cross-WLF, Tait PVT, thermal, mechanical, processing + comparison
DefectsShort shot, flash, sink marks, warpage, weld lines, burn marks, jetting, splay, voids, flow marks
SimulationMesh sensitivity, race tracking, cooling, overpacking, shear rate
ProcessCycle time, gate location, V/P switchover, degradation, crystallization, fiber orientation
DFMWall thickness, ribs, draft, radii, bosses, gating, tolerances, shrinkage, venting
MeshingMidplane, dual-domain, 3D — when to use, element sizing, quality metrics

Compatible Software

MoldSim MCP provides software-agnostic knowledge that applies to all major injection molding simulation packages:

  • Autodesk Moldflow — Adviser & Insight
  • Moldex3D — all editions
  • CADMOULD — Simcon
  • SIGMASOFT — Virtual Molding
  • SolidWorks Plastics

Tech Stack

  • Runtime: Node.js, TypeScript
  • Search: Qdrant vector database (local, embedded)
  • Embeddings: HuggingFace transformers
  • Protocol: Model Context Protocol (MCP)

License

MIT

來源:README.md,提交 ee4f5c1

工具

0
SourceWeft 尚未在沙箱中啟動過該軟體包,因此其工具未知。

版本歷史

1
  1. v0.4.1最新Sep 16, 2026

評分

已滿足適用檢查項的 50%

該評分衡量此收錄條目的完整程度,依據註冊中心條目、端點與公開來源計算得出。它不是對伺服器本身的評價,也不表示伺服器安全或目前可用:可連通性是帶日期的檢查結果,評分也不包含安裝量或使用者評價。

  • 近 30 天內可連通25 分

    請保持端點能夠回應 MCP 握手;SourceWeft 每 30 天探測一次。

  • 已宣告認證方式10 分

    請在註冊中心條目中宣告憑證請求標頭,或保持端點能夠回應探測,以便判定其認證方式。

  • 已列出工具15 分

    請讓伺服器在無憑證時回應 tools/list,或發布可在沙箱中無憑證啟動的軟體包。

  • 描述必需15 分
  • 圖示10 分
  • 文件15 分
  • 授權條款10 分