pqc-scan

pqc-scan

An inventory of the cryptography a JavaScript or TypeScript codebase uses, and which of it a large quantum computer would break.

An inventory and pointers, not a compliance certificate.

pqc-scan reads your source files, your package.json and lockfile, and any TLS (Transport Layer Security) configuration written down in the tree. It writes a report of every cryptographic algorithm it finds: through which interface (Web Crypto, node:crypto, a library), with what key size where the code says, where in the code, and a migration priority for each use a quantum computer would break. The report follows the discovery exercise the UK National Cyber Security Centre (NCSC) asks for in its post-quantum migration timeline: discovery and a plan by 2028, the highest-priority migrations by 2031, the rest by 2035.

It only reads. It runs nothing it scans, reads no environment variables, sends nothing anywhere, and has no telemetry. Zero dependencies; Node 20 or later. Free, and the command line stays free: a hosted report (trends over time, an organisation-wide view) may exist later, and would read the same JSON file; nothing of it is built.

Install

pqc-scan is a command-line tool. You need two things on your computer:

1. Node.js 20 or later. Check with node --version in a terminal (Command Prompt, PowerShell or Windows Terminal on Windows; Terminal on macOS or Linux). If the command is not found, or prints a version below 20, install the current "LTS" release from https://nodejs.org. On Windows the installer is a normal .msi; accept the defaults, then open a new terminal window so it picks up the change.
2. The scanner. The quickest way needs nothing more than Node.js: run it straight from the npm registry, downloading nothing by hand:
   sh

   npx @microtoll/pqc-scan path/to/your/app

   or install it once and call it as pqc-scan from anywhere:
   sh

   npm install -g @microtoll/pqc-scan

   If you would rather read the code first, or work without the registry, take it from this repository in one of two ways:
   • Download: on the repository page, Code → Download ZIP, then unzip it somewhere convenient, for example C:\Tools\pqc-scan on Windows or ~/tools/pqc-scan elsewhere.
   • Clone, if you have git:
     sh

     git clone https://github.com/microtoll/pqc-scan.git

There is nothing else to install: the scanner has no dependencies, so there is no npm install step inside it, and it needs no configuration, no account and no network connection to run.

Run it

Point it at the folder that holds your application's code (the one with its package.json).

On Windows (PowerShell or Command Prompt), with the scanner unzipped at C:\Tools\pqc-scan and your app at C:\Code\my-app:

C:\Tools\pqc-scan\pqc-scan C:\Code\my-app

On macOS or Linux:

node ~/tools/pqc-scan/bin/pqc-scan.mjs ~/code/my-app

It prints a short summary and writes two files into the folder you are standing in: pqc-scan.md, the report to read, and pqc-scan.json, the same for other tools. The summary tells you both paths:

pqc-scan: 6 quantum-vulnerable public-key uses in 5 files; 12 libraries; TLS groups not written down.  272 files read; 1 High, 5 Medium, 0 Low; 2 to check by hand.  Report: C:\Users\you\pqc-scan.md  (open it; read sections 1 and 3 first)  JSON:   C:\Users\you\pqc-scan.json

Open pqc-scan.md in any editor or Markdown viewer (Visual Studio Code shows it with Ctrl+Shift+V). Start with section 1, the summary, then section 3, the priorities, where each High or Medium says which line of your code it points at and why.

To put the reports somewhere else, name the files: --md C:\Reports\app.md and, if you want it, --json C:\Reports\app.json. If your tests are not in folders called test, tests, spec or __tests__, tell the scanner what their names contain, so the report can say how much of what it found is test code: --test-files self-check, repeatable.

A scan of a medium-sized application takes a few seconds. If you are in the scanner's own folder, . means "this folder", and --help prints every option:

node bin/pqc-scan.mjs --helpnode bin/pqc-scan.mjs . --fail-on high      # exit 1 if anything is High (for CI)

Things that catch people out:

• "node is not recognized" on Windows: Node.js is not installed, or the terminal was opened before the installer ran. Install it, then open a new terminal.
• A path with spaces needs quotes: "C:\My Projects\app".
• Nothing found? The scanner reads only JavaScript and TypeScript (.js, .mjs, .cjs, .ts, .mts, .cts, .jsx, .tsx), lockfiles and TLS configuration files. Code in other languages is not seen (see "What it cannot see").
• It never changes your files. It reads them and writes only the report files you name.

The full set of options:

In a script or a pipe, with none of --json, --md or --cbom, the Markdown goes to standard output and nothing is written to disk; at a terminal pqc-scan.md and pqc-scan.json are written instead (the bill of materials only when asked for). Exit codes: 0 done, 1 the --fail-on threshold was met, 2 a usage or read error. The threshold counts everything in the report, test code included; use --exclude to leave a directory out.

In GitHub Actions

permissions:  contents: readsteps:  - uses: actions/checkout@<commit>  - uses: microtoll/pqc-scan@<commit>   # pin a full commit SHA    with:      fail-on: high                      # optional; empty never fails

The action runs the scanner on the workspace, adds the Markdown report to the job summary, uploads the two reports and the bill of materials as the pqc-scan artefact, and then, if fail-on is set and met, fails the job. Its inputs: path, fail-on, exclude (one name per line), json, md, cbom, job-summary, upload, artifact-name. Its outputs: high, medium, low, verdict, json, cbom. It needs Node 20 or later on the runner; GitHub's hosted runners have it.

What it finds

• Web Crypto: crypto.subtle calls, with the algorithm read from the nearest literal, including the post-quantum and hybrid names (ML-KEM-768, ML-DSA-65, X25519MLKEM768, MLKEM768-X25519).
• node:crypto: hashes, HMACs, ciphers, key pairs, signatures, Diffie– Hellman, public-key encryption, PBKDF2, scrypt, HKDF and random numbers.
• Libraries: nearly sixty catalogued packages (tweetnacl, libsodium, the @noble family, jose, jsonwebtoken, bcrypt, crypto-js, web-push, openpgp, …), from package.json, package-lock.json, yarn.lock and pnpm-lock.yaml, with their calls where the catalogue maps them and JSON Web Token (JWT) algorithm names such as RS256.
• TLS: nginx, Apache, Caddy and Node's tls and https options; whether a hybrid post-quantum key-exchange group is enabled.

A value it cannot read (an algorithm name held in a variable) is reported as dynamic — check by hand, never guessed.

The priorities

Only public-key uses get a priority: a large quantum computer breaks RSA, elliptic-curve and Diffie–Hellman cryptography, but only weakens symmetric ciphers and hashes.

• High: a key agreement or public-key encryption that seals data. Someone can record the ciphertext now and open it later ("harvest now, decrypt later"). Consider a hybrid seal for new data.
• Medium: a signature. It can be forged only once such a computer exists, so the risk is to long-lived signatures. Plan; do not rush.
• Low: a key exchange for a session, including TLS without a hybrid group. The exposure is the session, not the archive.

The priority is a heuristic from the words near the call (seal, encrypt, store… against session, tls, handshake…). A use with no telling word is High until a person checks. Every entry says which word decided it. A person should review each High.

The report

• pqc-scan.json: the inventory, described by schema/pqc-scan.schema.json (version 1). Paths are relative, with forward slashes; the scanned directory appears by name only; two scans of the same tree differ only in scannedAt.
• pqc-scan.md: a summary, the inventory, the priorities with a replacement to consider, notes on symmetric ciphers and hashes (AES-128, SHA-1, MD5, 3DES, ECB mode, weak PBKDF2 iteration counts), dependencies, TLS, next steps in the NCSC's three milestones, and what the scan cannot see.
• --cbom <file>: the same inventory as a cryptographic bill of materials in the CycloneDX 1.6 format, the shape a central inventory, a supplier questionnaire or a viewer for these files expects.

The cryptographic bill of materials

A CycloneDX 1.6 bill of materials lists each algorithm variant the scan found as a cryptographic-asset component (AES-256-GCM, ECDH P-256, ML-KEM-768…) with CycloneDX's own fields where the name settles them (the primitive, the key size or curve, the mode, the functions used, the classical and NIST post-quantum security levels) and an occurrence for every use: the file, the line, the interface and call, and the source line with its priority. The Web Crypto API, node:crypto and each catalogued package appear as library components that provide the assets found through them, with a package URL (pkg:npm/…) and version where the lockfile says. Each TLS configuration is a protocol asset that references its key-exchange groups, so X25519 in a server's group list and X25519 in a Web Crypto call are one asset. What CycloneDX has no field for (the scanner's class and kind, the migration priority and its reason, literal parameters such as an iteration count, the notes) travels in properties named microtoll:pqc-scan:*. The bill of materials says nothing the JSON report does not: it is written from the report alone, its serial number is worked out from its own contents (two scans of one tree give the same bill of materials apart from the timestamp and the serial number), and it keeps the sentence an inventory and pointers, not a compliance certificate in its metadata. The mapping is in DESIGN.md §8.14, and every output is checked against the published CycloneDX schema in the tests.

For coding agents

pqc-scan mcp runs the scanner as a Model Context Protocol (MCP) server over standard input and output, so a coding agent in Claude Code, Cursor or any other MCP host can check the cryptography it has just written. Add it to Claude Code, for every project, with:

claude mcp add pqc-scan --scope user -- npx -y @microtoll/pqc-scan mcp

Without --scope user, Claude Code registers the server for the folder the command was run in only. New conversations pick it up; one already open does not.

Any other host takes the same command (npx -y @microtoll/pqc-scan mcp) as a stdio server. It offers one tool:

The summary holds the report's counts; each use to review (one with a priority, one whose algorithm could not be read, or one with a note) grouped by algorithm and what to do about it, with its files and lines, the most urgent first; and every other use counted by algorithm. It is what an agent acts on, and a twentieth the size of the whole report on a typical application, whose report can pass a host's limit on a tool result (Claude Code's is about 25,000 tokens). For the full report of a large codebase, scan the folder you changed, or use exclude.

The tool reads files only: it writes no report file and runs nothing it scans, and the scanner sends nothing anywhere. Its result goes back to the host that asked for it, and from there into the agent's context, which usually reaches the agent's model provider; the full report carries the source lines it found as evidence, lines the agent could already read; the summary carries files and line numbers only. To scan a folder that is itself named mcp, run pqc-scan ./mcp. The details are in DESIGN.md §8.15.

What it cannot see

• Anything that is not JavaScript, TypeScript, a lockfile or a TLS configuration file: other languages, binaries, the operating system, a cloud key service, anything behind a network call.
• Which files actually run. A library imported only by a file your service never loads is still reported.
• A framework's own cryptography, unless the framework is in the catalogue.
• Values that are not written down where it looks: it follows a const in the same block, or one hop to a relative import (not an import by a workspace package's name), and nothing else. A function parameter that shadows a module-level constant of the same name is the one known way this can mislead.
• Evidence is copied as written. A secret on the same line as a cryptographic call will appear in the report. Treat the report like the code it describes.

Develop

npm test

node:test, no framework, no dependencies. Every false positive found becomes a fixture under test/fixtures/ and a line in a test. The design and every settled detail are in DESIGN.md; security reports go by SECURITY.md.

How it was built, and support

The scanner was written with Claude Code (Anthropic's coding agent) working from a design written and decided by the founder, who read and accepted every change. The checks are what you can read here: the design, the fixtures of real code shapes, the tests, and the hand reviews of real repositories recorded in DESIGN.md §8. Every false positive those reviews found became a test.

The command line is free and stays free. If it saves you time, you can sponsor the work on GitHub.

Licence

Apache-2.0. See LICENSE.