Consolidate Notes

作者 inkeepdce5d77c266f無授權條款9 個星標收錄於 2026年10月8日更新於 2026年10月8日儲存庫昨天更新

Promote existing research into a stable-status canonical article under `articles/` in a Knowledge Base project (the `knowledge-base` starter pack). Read when a decision has actually been made and the team wants the source-of-truth written down, or when asked to consolidate, canonicalize, promote research, or supersede an older article. Carries the decision-confirmation gate, the `supersedes:` chain that keeps the evidence trail intact, and the canonical voice. Does not conduct new research — that is the sibling `research-with-sources` skill.

AI 產生的概覽

將既有研究提升為知識庫中的正式權威文章,並維護取代關係與決策確認關卡。

功能
把既有的研究筆記整理成知識庫 articles 目錄下狀態為 stable 的權威文章,依固定結構撰寫(摘要、背景、決策、理由、取捨、備選方案、實作說明、延伸閱讀)。它設有確認關卡,要求團隊確實已做出決策,並寫入含 supersedes 清單的 frontmatter,同時把被取代的研究標記為 deprecated 並加上 superseded_by 指標,還會從相關頁面補上連結。它不進行新的研究。
適用情境
適用於研究之後決策已經確定、團隊想把權威結論記錄下來時;也適用於把多篇臨時研究筆記合併成一篇權威文章,或被要求整合、正式化某個主題的知識時。決策尚未確定或尚未閱讀底層來源時不應使用。
執行需求
需要已設定 OpenKnowledge MCP 伺服器的代理宿主,並透過 knowledge-base 起始套件以專案本地方式安裝。需要存取知識庫內容目錄以及檔案讀寫與搜尋能力。不附帶指令碼,僅為操作說明。

Consolidate — promote research into a canonical article

This skill is pack guidance. The platform /open-knowledge skill (read/write/preview/linking/grounding rules) still governs every markdown operation — this layers the procedure on top.

Promote existing research on a topic into a canonical article under articles/. Canonical, not provisional — the output is the source of truth for future agents, not a snapshot of uncertainty.

The content directory is the resolved content.dir — read it with config({ key: 'content.dir' }) if you don't already know it. Paths below are relative to it.

Legacy reads: Existing research and articles may use status: provisional / canonical, and existing sources: may contain string paths. Treat those as draft / stable and source resources. Do not mass-rewrite them; new writes use the OKF forms below.

STOP gate: has a decision actually been made?

Consolidation is promotion, not creation. If the team hasn't decided, the resulting "canonical" article lies about the team's state of understanding — future agents read it, act on it, and the false certainty compounds.

Before any write, confirm out loud with the user:

  • What is the actual decision? (e.g., "We chose Yjs for CRDT" — not "Yjs is one option")
  • What alternatives were considered and rejected? (these go in "Alternatives considered," not as equals)
  • What's the rationale the team used? (not your reconstruction from sources)

If the decision is still open, do not consolidate. Tell the user: "The research is still provisional. When the team decides, come back and consolidate with the outcome." Then stop.

When to use this procedure

  • A team has made a decision after research and wants the outcome committed as canonical knowledge
  • You want to compact several provisional research notes into one authoritative article
  • A developer asks to "consolidate" or "finalize" the knowledge on a topic

Do NOT consolidate when:

  • The team has not actually decided (the output would be misleading — keep it as research)
  • You have not read the underlying sources (the output would lack evidence)

Principle: canonical, not provisional

A consolidated article is the source of truth. Agents reading it should not need to dig further for context — it should stand on its own. That means:

  • Clear, direct statements (no "tentative", no "initial findings")
  • Decisions stated as decisions, not options
  • Rationale explained so future readers understand the why
  • Trade-offs acknowledged but framed against the chosen path, not as a menu
  • Evidence linked but not the whole story — this article is the destination, not a trail

Steps

1. Load the research + sources

Locate research articles on this topic:

  • Use exec("grep -rn <topic-keyword> <content-dir>") to find prior research, or exec("ls -A research") if the project groups research in a known location
  • Read each research article fully via exec("cat <path>") (rich enrichment gives frontmatter + shadow-repo activity + project git history + backlinks)
  • Follow its sources: frontmatter list — read every referenced source file
  • Also read any existing canonical article on the topic — if one already exists, you may be updating it rather than creating a new one

If there is no research to consolidate, stop. Consolidation is promotion, not creation. Do the /research-with-sources skill first.

2. Re-confirm the decision

You already confirmed the decision at the STOP gate at the top. This step is a brief re-check after loading the research in Step 1 — occasionally the research surfaces something that makes the "decision" look less decided than the user initially claimed (an un-rebutted open question, an alternative they forgot about). If the loaded research reveals that, pause and re-confirm with the user before writing.

3. Write the canonical article

Persist as you go (MUST). For a large consolidation drawing on several research docs, create the article skeleton — frontmatter + the headings below — first, then edit each section in as you finish it; don't hold the whole synthesis in context for one final write. A rate limit or crash mid-synthesis then costs you one section, not the entire article. (The platform skill's Writing section carries this rule for all long-running work: the knowledge base is your checkpoint.)

Save inside the content directory. Path convention depends on the project:

  • If the project uses the three-layer lifecycle (external-sources/ → research/ → articles/), save under articles/, grouped by topic subfolder when the area is broad (e.g., articles/editor/crdt-architecture.md)
  • If the project has an existing canonical-docs layout (docs/, guides/, etc.), save there in a location that matches the project's conventions
  • Ask the user when the canonical location is ambiguous

Frontmatter:

yaml
---title: Descriptive titledescription: One-line summary of what this article coverstype: articlestatus: stabledate: YYYY-MM-DDtags:  - article  - canonical  - topic-tagsupersedes:  - <path-to-research-article>.md---

Structure:

markdown
## Summary
[One paragraph: what the decision is and why. A reader who reads only this paragraph should know the outcome.]
## Context
[What problem does this solve? What constraints shaped the decision?]
## Decision
[The chosen approach, stated directly. Not "we recommend" — "we chose".]
## Rationale
[Why this path over alternatives. Grounded in the constraints from Context.]
## Trade-offs
[What we gave up by choosing this path. Frame against the chosen decision, not as a menu.]
## Alternatives considered
[Briefly: what else was on the table, why it was rejected. Link to the research article for deeper analysis.]
## Implementation notes
[How this gets realized in the codebase — key files, patterns, gotchas.]
## Further reading
[Links to research articles and external sources for readers who want the trail.]

4. Link aggressively

Canonical articles are destinations — they should be linked heavily from everywhere they're relevant and link out to every related page themselves. Underlinked canonical articles lose most of their value.

  • Inside this article: every noun-phrase that names another document (other canonical articles, related research, external-source pages, sibling topics) should be a standard markdown link, not plain prose.
  • Every link must resolve. Only link to docs that exist. If you mention a concept that should have its own page but doesn't yet, do NOT emit a broken link — either create that page in this pass, or record it as a tracked task (your host's task tool; if the host has none, tell the user) and leave the mention as plain prose. A broken link is debt, not a to-do marker.
  • Update neighbors. After writing, find 2-3 closely-related existing pages (via exec("grep -rn <topic> <content-dir>")) and add a link to the new article from each — usually under a "See also" section or inline where the new article is relevant. This makes the article discoverable via backlinks, not just by remembering the path.
  • Link to the sources and superseded research from "Further reading" — readers who want the trail can follow.

5. Supersede the research

Add a supersedes: list in the new article's frontmatter pointing at the research article(s) it consolidates. This creates an audit trail.

Do NOT delete the research articles — they remain as historical context for how the decision was reached. Edit their frontmatter to add:

yaml
status: deprecatedsuperseded_by: <path-to-new-canonical-article>.md

6. Verify

  • File exists at the chosen path under the content directory
  • Has type: article and status: stable frontmatter
  • Lists the research articles it supersedes
  • Research articles updated with status: deprecated and a superseded_by pointer
  • exec("ls -A <target-dir>") shows the new file

Non-goals

  • Don't consolidate research that hasn't reached a decision — the article would misrepresent the team's actual state of understanding
  • Don't delete research articles — they are the trail; keep them with a superseded_by marker
  • Don't rewrite research prose verbatim — canonical articles have a different voice (direct, decided) than research (exploratory, provisional)
  • Don't skip the supersedes / superseded_by links — the audit trail matters for future readers

來源與署名

來源:inkeep/open-knowledge-skills位於skills/starter-packs/knowledge-base/consolidate-notes提交dce5d77

授權條款: 無授權條款

內容歸原作者所有。SourceWeft 從公開儲存庫中收錄這些內容。

檢舉或申請下架